7
Votes

Easy mesh in AP Mode

 
7
Votes

Easy mesh in AP Mode

Easy mesh in AP Mode
Easy mesh in AP Mode
2025-06-09 18:21:00 - last edited 2026-08-21 07:29:12
Model: Archer AXE75  
Hardware Version: V1
Firmware Version: 1.3.2 Build 20250107 rel.52099(4555)

I'm struggling with using easy mesh with my axe75. 

I have and AX53 and it is set to AP mode. In its settings I can turn easy mesh on and set up a mesh. With this in mind I brought the AXE75 and thought I would mesh them.

However when the AXE75 is in AP mode there is no easymesh option. This means I can not completely control my network. I can mesh them using the AX53 as the master but I can't then control the SSID for the 6E broadcast. 

The router is a seperate device on my network and I will not be using either device as a router

 

Any help would be appreciated, ATM I feel the AXE75 is a bit of a waste if I can't mesh them correctly. 

 

Thanks for reading. 

#1
Options
1 Accepted Solution
Re:Easy mesh in AP Mode-Solution
2026-07-30 02:14:07 - last edited 2026-07-30 02:15:34

Hi everyone,

To make it easier for us to manage and follow up on your feedback, we’ve decided to consolidate all requests about “Wi-Fi Router support for EasyMesh in AP mode” into this single thread. This will be our main hub going forward!

We’ll be merging other similar posts into this one and locking them, so we won’t be replying to those individually. If you don’t mind, please use this main thread for any future discussions. This way, we can better track what you’re asking for.

 

 

📌 Please leave your comment below:

Cast Your Vote
The number of votes will directly affect the evaluation priority of this feature request. Please be sure to vote in time.

 

Join the Discussion
You are welcome to reply under the main post and share your specific needs or use cases. Your discussion will also serve as an important reference for the evaluation of requirements.


When participating in the discussion, please include the following information:

  • Specific model and hardware/software version (e.g., Archer AX12-V1-1.5.0, etc.)
  • Feature request
  • Use case (e.g., daily use, office work, specific environments, etc.)
  • Other supplementary information (e.g., where you learned about this feature, similar products you’ve referenced, etc.)

 

🔔 Next Steps
Based on the number of votes collected, we will regularly share this feature request with relevant teams and keep track of any updates on this feature. If there is any progress, we will post an update in the main post.

 

Thanks again for your support!

Welcome to our Community! Latest Pre-Release firmware: ▷Archer BE550 V2 Enhances EasyMesh Support with Guest/IoT/MLO Extension ▷Archer GE550/GE650 V2 Introduces AI QoS, VPN Enhancements More posts, please see: ▷Get the Ongoing Pre-release Firmware for Wi-Fi Routers Here! Contact via Messages or @Joesph-TP in your new post for urgent problems (not online 24/7). Click Recommended Solution if the post/answer helps.
Recommended Solution
#8
Options
12 Reply
Re:Easy mesh in AP Mode
2025-06-09 19:21:39 - last edited 2025-06-10 10:48:43

  @Fainer 

 

Hi,

 

The first post of this thread https://community.tp-link.com/en/home/forum/topic/697572 lists all the router models that currently support EasyMesh in AP mode.

 

If and when the Archer AXE75 is going to get this feature is not known yet.

 

#2
Options
Re:Easy mesh in AP Mode
2025-06-09 21:42:41 - last edited 2025-06-10 10:48:43
Thanks for your reply, this is very helpful, I'll keep an eye on this post. Thank you.
#3
Options
Re:Easy mesh in AP Mode
2025-06-10 10:48:23 - last edited 2025-06-10 10:48:43

Hi@Fainer,

 

Thank you for posting on the TP-Link community, and we certainly appreciate all your feedback and feature request(s) here.

While we don't have any specific details that I can share around, I'll make sure to log this feature request and pass it along to the team.

I'm moving this conversation into the ‘Feature Request' area for better visibility.

Feel free to let us know of any other feature requests you may have, we’d be happy to send them up for you.

 

Welcome to our Community! Latest Pre-Release firmware: ▷Archer BE550 V2 Enhances EasyMesh Support with Guest/IoT/MLO Extension ▷Archer GE550/GE650 V2 Introduces AI QoS, VPN Enhancements More posts, please see: ▷Get the Ongoing Pre-release Firmware for Wi-Fi Routers Here! Contact via Messages or @Joesph-TP in your new post for urgent problems (not online 24/7). Click Recommended Solution if the post/answer helps.
#4
Options
RE:Easy mesh in AP Mode
2025-11-24 07:30:08
Similar situation to the original poster. I just upgraded a C80 to an AXE75. EasyMesh in AP mode support for the C80 came about a year ago, and I though the AXE being a newer, more powerful option would have that option too. Hope it gets added soon!
#6
Options
Re:Easy mesh in AP Mode
2026-04-21 16:02:15

Some time has passed but it seems that we still don't have Easy Mesh support in AP mode for AXE75. Any ETA on when could we expect it to happen? Would be nice, especially that AX55 got it way sooner.

#7
Options
Re:Easy mesh in AP Mode-Solution
2026-07-30 02:14:07 - last edited 2026-07-30 02:15:34

Hi everyone,

To make it easier for us to manage and follow up on your feedback, we’ve decided to consolidate all requests about “Wi-Fi Router support for EasyMesh in AP mode” into this single thread. This will be our main hub going forward!

We’ll be merging other similar posts into this one and locking them, so we won’t be replying to those individually. If you don’t mind, please use this main thread for any future discussions. This way, we can better track what you’re asking for.

 

 

📌 Please leave your comment below:

Cast Your Vote
The number of votes will directly affect the evaluation priority of this feature request. Please be sure to vote in time.

 

Join the Discussion
You are welcome to reply under the main post and share your specific needs or use cases. Your discussion will also serve as an important reference for the evaluation of requirements.


When participating in the discussion, please include the following information:

  • Specific model and hardware/software version (e.g., Archer AX12-V1-1.5.0, etc.)
  • Feature request
  • Use case (e.g., daily use, office work, specific environments, etc.)
  • Other supplementary information (e.g., where you learned about this feature, similar products you’ve referenced, etc.)

 

🔔 Next Steps
Based on the number of votes collected, we will regularly share this feature request with relevant teams and keep track of any updates on this feature. If there is any progress, we will post an update in the main post.

 

Thanks again for your support!

Welcome to our Community! Latest Pre-Release firmware: ▷Archer BE550 V2 Enhances EasyMesh Support with Guest/IoT/MLO Extension ▷Archer GE550/GE650 V2 Introduces AI QoS, VPN Enhancements More posts, please see: ▷Get the Ongoing Pre-release Firmware for Wi-Fi Routers Here! Contact via Messages or @Joesph-TP in your new post for urgent problems (not online 24/7). Click Recommended Solution if the post/answer helps.
Recommended Solution
#8
Options
Re:Easy mesh in AP Mode
2026-07-30 02:56:52 - last edited 2026-07-30 02:57:27

more than 2 years! passed and still waiting for https://community.tp-link.com/en/home/forum/topic/667250

it is very hard to not express my unconditional disapointment with this lame brand

#9
Options
RE:Easy mesh in AP Mode
2026-08-02 18:08:18
I want to control my Wi-Fi from my mobile, is this possible?
#10
Options
Re:Easy mesh in AP Mode
2026-08-16 18:00:18

  @Joseph-TP 

 

Archer AXE75 v1.0 here, daily use.

 

Please add EasyMesh support in AP Mode. I had an Archer C80 before the AXE75, and the C80 had it.

 

Not sure why this is not enabled Out of the Box for all models, especially since it has already been done for older ones.

#11
Options
Re:Easy mesh in AP Mode
Monday

Hi everyone,

 

I am planning to restructure my home network setup and would like to confirm if EasyMesh with Ethernet Backhaul will work properly in my intended Access Point (AP) topology.

 

Current Setup (Working)

ISP Modem/Router: Connected to Internet box in Bridge mode.

 

Main Router: Archer AX73 v1.0 (Firmware 1.3.6 Build 20240407) in Router Mode, acting as the primary router and handling DHCP/routing (192.168.0.x).

 

Satellites:

 

Archer AX55 (in the kitchen) connected via Ethernet.

 

RE700X Range Extender (in the utility room) via Wireless Backhaul.

 

Future Target Setup

I want my ISP Modem/Router to operate out of bridge mode to act as the primary router (handling DHCP and routing). Connected directly to 3 LAN ports of the ISP router via structured cabling will be:

 

An Archer AX55 in Access Point (AP) mode (Kitchen/Living area)

 

An Archer AX73 v1.0 (Firmware 1.3.6) in Access Point (AP) mode (1st Floor)

 

An Unmanaged Network Switch (feeding an IPTV decoder and a Nintendo Switch 2 in the Living Room)

 

Proposed Layout:

                     [ISP Modem/Router in Garage] 

                     (Primary Router & DHCP Server)

                                  |

       +--------------------------+--------------------------+

       |                          |                          |

[Archer AX55]              [Archer AX73 v1.0]       [Unmanaged Switch]

- AP Mode                  - AP Mode (1st Floor)    (Living Room)

- EasyMesh Main Node       - EasyMesh Satellite              |

  (Controller)               (Wired Backhaul)        +-------+-------+

                                                     |               |

                                              [IPTV Decoder]  [Nintendo 2]

 

* Additionally, an RE700X Extender is connected to the AX55 Controller via Wireless Backhaul.

Key Questions:

EasyMesh + AP Mode: Does the Archer AX55 support acting as the EasyMesh Main Controller while operating in Access Point (AP) mode?

 

Wired Backhaul in AP Mode via ISP Router: Will the Archer AX73 v1.0 correctly establish a Wired Ethernet Backhaul to the AX55 Controller when both units are in AP mode and plugged into separate LAN ports of the same ISP router?

 

Separate SSIDs in EasyMesh: Does EasyMesh properly synchronize satellite nodes and support seamless roaming when 2.4GHz and 5GHz bands use distinct SSIDs (Smart Connect disabled)?

 

Thanks in advance for your insights and confirmation! 

#12
Options