Business Community > Switches & Routers > Sg1008 won't work on ip camera
< Switches & Routers

Sg1008 won't work on ip camera

Sg1008 won't work on ip camera
Sg1008 won't work on ip camera
2015-10-22 09:31:57
Model : TL-SG1008

Hardware Version : Not Clear

Firmware Version :

ISP :

I have a sg1008 switch that I would like to use to power 2 ip cameras. The specific cameras are the alarm.Com adc v720w poe ready cameras. Any insight as to what I can do to get this working would be greatly appreciated.
0
0
#1
Options
3 Replies
Re:Sg1008 won't work on ip camera
2015-10-22 09:59:51
Your cameras are 802.3af PoE compliant?
The switch is TL-SG1008 instead of TL-SG1008P? But it is TL-SG1008P that has four PoE ports.
0
0
#2
Options
Re:Sg1008 won't work on ip camera
2015-10-22 10:34:20
I have the tl-sg1008p switch with 4 port poe. The camera is poe ready but I don't know if it is 802.3af poe compliant. If I use a poe splitter will that work?
0
0
#3
Options
Re:Sg1008 won't work on ip camera
2015-10-23 09:26:59
tl-sg1008p can power on PoE IEEE 802.3af compliant PDs. If your cameras are not, you can use tl-sg1008p plus four TL-POE10Rs to power them on.
http://www.tp-link.com/en/faq-167.html
0
0
#4
Options
Related Articles
Unable to get VLAN to work on SG105E v3
800 0
Issues using PoE on SG-3424P and Vivotek IP camera model IP8133
227 0
VLAN on SG 1024 DE does not work
810 0
can't get the ip to work
298 0
TP link with NAS and ip camera issues
293 0
LAG Groups doesn´t work
95 0
About Us
Press
Copyright © 2020 TP-Link Corporation Limited. All rights reserved.