HB611 Wireless Backhaul and Mesh Compatibility

HB611 Wireless Backhaul and Mesh Compatibility

HB611 Wireless Backhaul and Mesh Compatibility
HB611 Wireless Backhaul and Mesh Compatibility
2025-08-22 10:25:05 - last edited 2025-08-25 03:49:35
Model: HB810  
Hardware Version: V1
Firmware Version: V3.0

Hi, can I check regarding the HB611:

 

  1. In wireless backhaul mesh mode, is the connection established via MLO (Multi-Link Operation) or via multi-band steering?

  2. Is the wireless backhaul operating under EasyMesh or Deco Mesh?

  3. Can the HB611 be connected to a Deco BE85 to form a Deco Mesh?

 

Thanks in advance!

  0      
  0      
#1
Options
1 Accepted Solution
Re:HB611 Wireless Backhaul and Mesh Compatibility-Solution
2025-08-23 00:18:23 - last edited 2025-08-25 03:49:35

  @extraboi 

 

1. Not sure but according to this post below you can have MLO on or off and still have wireless back haul

 

https://community.tp-link.com/en/home/forum/topic/712050?replyId=1431268

 

2. Easy mesh for the HB611, Deco mesh for the BE85

 

3. The following was taken from the link below

 

Summary

Though Deco Mesh, EasyMesh, OneMesh™, and Omada Mesh all support Mesh networking, they are different Mesh technologies. Deco Mesh, Omada Mesh, and EasyMesh or OneMesh™ are supported by different TP-Link products, so they cannot build a Mesh network together. For EasyMesh-compatible products from TP-Link, they can combine with EasyMesh routers, range extenders, or Powerline WiFi adapters from TP-Link or other vendors and are also capable of forming whole home Mesh WiFi with OneMesh products. Please choose one of the Mesh products based on your actual needs and start building a seamless network for your office or home today.

 

https://www.omadanetworks.com/za/blog/1296/tp-link-deco-mesh-vs-easymesh-vs-onemesh-vs-omada-mesh-what-s-the-difference-/?app=t#:~:text=Deco%20Mesh%2C%20Omada%20Mesh%2C%20and,build%20a%20Mesh%20network%20together.

 

  

Need help with the Deco app, setup, Ethernet backhaul, network switch or rolling back firmware? Router or AP mode? https://community.tp-link.com/us/home/forum/topic/699816?page=1
Recommended Solution
  1  
  1  
#2
Options
1 Reply
Re:HB611 Wireless Backhaul and Mesh Compatibility-Solution
2025-08-23 00:18:23 - last edited 2025-08-25 03:49:35

  @extraboi 

 

1. Not sure but according to this post below you can have MLO on or off and still have wireless back haul

 

https://community.tp-link.com/en/home/forum/topic/712050?replyId=1431268

 

2. Easy mesh for the HB611, Deco mesh for the BE85

 

3. The following was taken from the link below

 

Summary

Though Deco Mesh, EasyMesh, OneMesh™, and Omada Mesh all support Mesh networking, they are different Mesh technologies. Deco Mesh, Omada Mesh, and EasyMesh or OneMesh™ are supported by different TP-Link products, so they cannot build a Mesh network together. For EasyMesh-compatible products from TP-Link, they can combine with EasyMesh routers, range extenders, or Powerline WiFi adapters from TP-Link or other vendors and are also capable of forming whole home Mesh WiFi with OneMesh products. Please choose one of the Mesh products based on your actual needs and start building a seamless network for your office or home today.

 

https://www.omadanetworks.com/za/blog/1296/tp-link-deco-mesh-vs-easymesh-vs-onemesh-vs-omada-mesh-what-s-the-difference-/?app=t#:~:text=Deco%20Mesh%2C%20Omada%20Mesh%2C%20and,build%20a%20Mesh%20network%20together.

 

  

Need help with the Deco app, setup, Ethernet backhaul, network switch or rolling back firmware? Router or AP mode? https://community.tp-link.com/us/home/forum/topic/699816?page=1
Recommended Solution
  1  
  1  
#2
Options