Home Network Community > Wi-Fi Routers > led-controller[1409]: <6> 288051 Start to run WAN0_OFF
< Wi-Fi Routers

led-controller[1409]: <6> 288051 Start to run WAN0_OFF

led-controller[1409]: <6> 288051 Start to run WAN0_OFF

led-controller[1409]: <6> 288051 Start to run WAN0_OFF
led-controller[1409]: <6> 288051 Start to run WAN0_OFF
Friday
Model: Archer AX50  
Hardware Version: V1
Firmware Version: 1.0.16 Build 20241206 rel.67226(4555)

I have a problem with the AX50 router, it disconnects from the internet for about 30 seconds, when this happens in the router logs I see this

 

 

####################################################################
#                  Archer AX50 System Log
# Time = 2025-09-12 20:32:10
# H-Ver = 1.0.0 ; S-Ver = 1.0.16 Build 20241206 rel.67226

####################################################################

 

2025-09-12 20:03:25 upnp[23440]: <6> 217504 Service start
2025-09-12 20:03:25 upnp[23440]: <6> 217505 Service stop
2025-09-12 20:03:23 remote-management[23125]: <6> 282505 Service stop
2025-09-12 20:03:06 led-controller[1409]: <6> 288051 Start to run WAN1_ON
2025-09-12 20:03:06 led-controller[1409]: <6> 288051 Start to run WAN0_OFF
2025-09-12 20:03:06 led-controller[1409]: <6> 288051 Start to run LAN_ON
2025-09-12 20:03:06 nat[20916]: <6> 211501 Initialization succeeded
2025-09-12 20:03:05 nat[20916]: <6> 211501 Initialization succeeded
2025-09-12 20:03:01 led-controller[1409]: <6> 288051 Start to run WAN1_OFF
2025-09-12 20:03:01 led-controller[1409]: <6> 288051 Start to run WAN0_ON
2025-09-12 20:03:01 led-controller[1409]: <6> 288051 Start to run LAN_ON
2025-09-12 20:02:02 led-controller[1409]: <6> 288051 Start to run WAN1_OFF
2025-09-12 20:02:02 led-controller[1409]: <6> 288051 Start to run WAN0_OFF
2025-09-12 20:02:02 led-controller[1409]: <6> 288051 Start to run LAN_ON
2025-09-12 20:01:59 led-controller[1409]: <6> 288051 Start to run WAN1_OFF
2025-09-12 20:01:59 led-controller[1409]: <6> 288051 Start to run WAN0_ON
2025-09-12 20:01:59 led-controller[1409]: <6> 288051 Start to run LAN_ON
2025-09-12 20:01:58 nat[14849]: <6> 211501 Initialization succeeded
2025-09-12 20:01:58 nat[14849]: <6> 211501 Initialization succeeded
2025-09-12 20:01:55 led-controller[1409]: <6> 288051 Start to run WAN1_OFF
2025-09-12 20:01:55 led-controller[1409]: <6> 288051 Start to run WAN0_OFF
2025-09-12 20:01:55 led-controller[1409]: <6> 288051 Start to run LAN_ON
2025-09-12 18:25:34 upnp[14748]: <6> 217504 Service start
2025-09-12 18:25:34 upnp[14748]: <6> 217505 Service stop
2025-09-12 18:25:33 remote-management[14531]: <6> 282505 Service stop
2025-09-12 18:25:29 led-controller[1409]: <6> 288051 Start to run WAN1_ON
2025-09-12 18:25:29 led-controller[1409]: <6> 288051 Start to run WAN0_OFF
2025-09-12 18:25:29 led-controller[1409]: <6> 288051 Start to run LAN_ON
2025-09-12 18:25:16 nat[11815]: <6> 211501 Initialization succeeded
2025-09-12 18:25:15 nat[11815]: <6> 211501 Initialization succeeded
2025-09-12 18:25:10 led-controller[1409]: <6> 288051 Start to run WAN1_OFF
2025-09-12 18:25:10 led-controller[1409]: <6> 288051 Start to run WAN0_ON
2025-09-12 18:25:10 led-controller[1409]: <6> 288051 Start to run LAN_ON
2025-09-12 18:24:41 nat[8629]: <6> 211501 Initialization succeeded
2025-09-12 18:24:40 nat[8629]: <6> 211501 Initialization succeeded
2025-09-12 18:24:39 led-controller[1409]: <6> 288051 Start to run WAN1_OFF
2025-09-12 18:24:39 led-controller[1409]: <6> 288051 Start to run WAN0_OFF
2025-09-12 18:24:39 led-controller[1409]: <6> 288051 Start to run LAN_ON

  0      
 
  0      
 
#1
Options
8 Reply
Re:led-controller[1409]: <6> 288051 Start to run WAN0_OFF
Monday

Hello @LordTerror ,

Welcome to our community.

 

Have you updated firmware recently? When did the unstable situation star occurring?

 

It seems that the WAN connection is unstable, please try the following suggestions:

  •  Connect a PC directly to your modem to verify if your ISP's Internet is stable.
  • Try a different cable between the router and ISP modem.
  •  Ensure the Ethernet cable connecting your modem to the Router is properly connected, and replace old wires with new ones.
  •  Please change the DNS Server of the Router, log in to the web management interface of the Router, go to Advanced > Network > Internet > Advanced Settings, and change the two DNS Servers to 8.8.8.8 and 8.8.4.4,  How to Change the DNS servers on the wireless router and DSL modem router (New UI)?

 

Best Regards.

Check Out the Latest Posts: △ Pre-release Firmware for Archer AX80 Supports EasyMesh in AP Mode, DoH/DoT, ECO Mode, and More △Introducing AI QoS: Elevate Your Gaming Experience on the Archer GE800 Gaming Router △Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN △ Tether KidShield Test Recruitment - Safeguarding Children's Online Experience
  0  
  0  
#2
Options
Re:led-controller[1409]: <6> 288051 Start to run WAN0_OFF
Monday

  @Joseph-TP 

For me, changing the DNS server does not help, the problem continues. I use an ONU EPON from my provider, I replaced it with a new one, the problem continues. The AX50 router was replaced with another router of another brand and this problem is gone. The other thing I noticed is that after resetting the router to factory settings, the problem disappears for 2-3 days and then starts again.

 

2025-09-15 04:27:06 nat[16960]: <6> 211501 Initialization succeeded
2025-09-15 04:27:05 nat[16960]: <6> 211501 Initialization succeeded
2025-09-15 04:26:05 led-controller[1410]: <6> 288051 Start to run WAN1_OFF
2025-09-15 04:26:05 led-controller[1410]: <6> 288051 Start to run WAN0_ON
2025-09-15 04:26:05 led-controller[1410]: <6> 288051 Start to run LAN_ON
2025-09-15 04:25:58 nat[11575]: <6> 211501 Initialization succeeded
2025-09-15 04:25:57 nat[11575]: <6> 211501 Initialization succeeded
2025-09-15 03:50:35 upnp[23930]: <6> 217504 Service start
2025-09-15 03:50:35 upnp[23930]: <6> 217505 Service stop
2025-09-15 03:50:32 remote-management[23724]: <6> 282505 Service stop
2025-09-15 03:50:31 led-controller[1410]: <6> 288051 Start to run WAN1_ON
2025-09-15 03:50:31 led-controller[1410]: <6> 288051 Start to run WAN0_OFF
2025-09-15 03:50:31 led-controller[1410]: <6> 288051 Start to run LAN_ON
2025-09-15 03:50:15 nat[21598]: <6> 211501 Initialization succeeded
2025-09-15 03:50:14 nat[21598]: <6> 211501 Initialization succeeded
2025-09-15 03:50:01 led-controller[1410]: <6> 288051 Start to run WAN1_OFF
2025-09-15 03:50:01 led-controller[1410]: <6> 288051 Start to run WAN0_ON
2025-09-15 03:50:01 led-controller[1410]: <6> 288051 Start to run LAN_ON
2025-09-15 03:49:57 led-controller[1410]: <6> 288051 Start to run WAN1_OFF
2025-09-15 03:49:57 led-controller[1410]: <6> 288051 Start to run WAN0_OFF
2025-09-15 03:49:57 led-controller[1410]: <6> 288051 Start to run LAN_ON
2025-09-15 03:49:50 led-controller[1410]: <6> 288051 Start to run WAN1_OFF
2025-09-15 03:49:50 led-controller[1410]: <6> 288051 Start to run WAN0_ON
2025-09-15 03:49:50 led-controller[1410]: <6> 288051 Start to run LAN_ON
2025-09-15 03:49:44 nat[18803]: <6> 211501 Initialization succeeded
2025-09-15 03:49:44 nat[18803]: <6> 211501 Initialization succeeded
2025-09-15 03:49:42 led-controller[1410]: <6> 288051 Start to run WAN1_OFF
2025-09-15 03:49:42 led-controller[1410]: <6> 288051 Start to run WAN0_OFF
2025-09-15 03:49:42 led-controller[1410]: <6> 288051 Start to run LAN_ON
2025-09-15 03:42:12 upnp[18153]: <6> 217504 Service start
2025-09-15 03:42:12 upnp[18153]: <6> 217505 Service stop
2025-09-15 03:42:11 remote-management[17969]: <6> 282505 Service stop
2025-09-15 03:41:52 nat[15678]: <6> 211501 Initialization succeeded
2025-09-15 03:41:52 led-controller[1410]: <6> 288051 Start to run WAN1_ON
2025-09-15 03:41:52 led-controller[1410]: <6> 288051 Start to run WAN0_OFF
2025-09-15 03:41:52 led-controller[1410]: <6> 288051 Start to run LAN_ON
2025-09-15 03:41:52 nat[15678]: <6> 211501 Initialization succeeded
2025-09-15 03:41:37 nat[14067]: <6> 211501 Initialization succeeded
2025-09-15 03:41:37 nat[14067]: <6> 211501 Initialization succeeded
2025-09-15 03:41:33 upnp[13764]: <6> 217504 Service start
2025-09-15 03:41:33 upnp[13764]: <6> 217505 Service stop
2025-09-15 03:41:32 led-controller[1410]: <6> 288051 Start to run WAN1_OFF
2025-09-15 03:41:32 led-controller[1410]: <6> 288051 Start to run WAN0_ON
2025-09-15 03:41:31 led-controller[1410]: <6> 288051 Start to run LAN_ON
2025-09-15 03:41:31 remote-management[13567]: <6> 282505 Service stop
2025-09-15 03:41:29 led-controller[1410]: <6> 288051 Start to run WAN1_OFF
2025-09-15 03:41:29 led-controller[1410]: <6> 288051 Start to run WAN0_OFF
2025-09-15 03:41:29 led-controller[1410]: <6> 288051 Start to run LAN_ON
2025-09-15 03:41:29 led-controller[1410]: <6> 288051 Start to run WAN1_ON
2025-09-15 03:41:29 led-controller[1410]: <6> 288051 Start to run WAN0_OFF
2025-09-15 03:41:29 led-controller[1410]: <6> 288051 Start to run LAN_ON
2025-09-15 03:41:14 nat[11490]: <6> 211501 Initialization succeeded
2025-09-15 03:41:13 nat[11490]: <6> 211501 Initialization succeeded
2025-09-15 03:40:47 led-controller[1410]: <6> 288051 Start to run WAN1_OFF
2025-09-15 03:40:47 led-controller[1410]: <6> 288051 Start to run WAN0_ON
2025-09-15 03:40:47 led-controller[1410]: <6> 288051 Start to run LAN_ON
2025-09-15 03:40:27 nat[7530]: <6> 211501 Initialization succeeded
2025-09-15 03:40:27 nat[7530]: <6> 211501 Initialization succeeded
2025-09-15 03:40:26 led-controller[1410]: <6> 288051 Start to run WAN1_OFF
2025-09-15 03:40:26 led-controller[1410]: <6> 288051 Start to run WAN0_OFF
2025-09-15 03:40:26 led-controller[1410]: <6> 288051 Start to run LAN_ON
2025-09-14 14:29:18 upnp[14558]: <6> 217504 Service start
2025-09-14 14:29:18 upnp[14558]: <6> 217505 Service stop
2025-09-14 14:29:17 remote-management[14393]: <6> 282505 Service stop
2025-09-14 14:29:15 led-controller[1410]: <6> 288051 Start to run WAN1_ON
2025-09-14 14:29:15 led-controller[1410]: <6> 288051 Start to run WAN0_OFF
2025-09-14 14:29:15 led-controller[1410]: <6> 288051 Start to run LAN_ON
2025-09-14 14:29:00 nat[12356]: <6> 211501 Initialization succeeded
2025-09-14 14:28:59 nat[12356]: <6> 211501 Initialization succeeded
2025-09-14 14:28:54 led-controller[1410]: <6> 288051 Start to run WAN1_OFF
2025-09-14 14:28:54 led-controller[1410]: <6> 288051 Start to run WAN0_ON
2025-09-14 14:28:54 led-controller[1410]: <6> 288051 Start to run LAN_ON
2025-09-14 14:27:58 nat[7022]: <6> 211501 Initialization succeeded
2025-09-14 14:27:58 nat[7022]: <6> 211501 Initialization succeeded
2025-09-14 14:27:57 led-controller[1410]: <6> 288051 Start to run WAN1_OFF
2025-09-14 14:27:57 led-controller[1410]: <6> 288051 Start to run WAN0_OFF
2025-09-14 14:27:57 led-controller[1410]: <6> 288051 Start to run LAN_ON
2025-09-14 12:56:17 upnp[2444]: <6> 217504 Service start
2025-09-14 12:56:17 upnp[2444]: <6> 217505 Service stop
2025-09-14 12:56:16 remote-management[2256]: <6> 282505 Service stop
2025-09-14 12:55:58 nat[31979]: <6> 211501 Initialization succeeded
2025-09-14 12:55:57 nat[31979]: <6> 211501 Initialization succeeded
2025-09-14 12:55:48 nat[30532]: <6> 211501 Initialization succeeded
2025-09-14 12:55:48 nat[30532]: <6> 211501 Initialization succeeded
2025-09-14 12:55:46 traffic-stats[5698]: <6> 269004 stats reset
2025-09-14 12:55:46 network[30304]: <6> 290005 Reload config
2025-09-14 12:55:45 network[30304]: <6> 290004 Disconnect interface wan
2025-09-14 12:55:43 network[30304]: <6> 290004 Disconnect interface internet
2025-09-14 12:55:42 network[30304]: <6> 290100 Set WAN protocol to dhcp, operation is write
2025-09-14 07:34:26 upnp[14213]: <6> 217504 Service start
2025-09-14 07:34:26 upnp[14213]: <6> 217505 Service stop
2025-09-14 07:34:25 remote-management[14047]: <6> 282505 Service stop
2025-09-14 07:34:07 nat[12184]: <6> 211501 Initialization succeeded
2025-09-14 07:34:07 led-controller[1410]: <6> 288051 Start to run WAN1_ON
2025-09-14 07:34:07 led-controller[1410]: <6> 288051 Start to run WAN0_OFF
2025-09-14 07:34:07 led-controller[1410]: <6> 288051 Start to run LAN_ON
2025-09-14 07:34:06 nat[12184]: <6> 211501 Initialization succeeded
2024-12-06 00:01:49 nat[11002]: <6> 211021 IPSEC ALG enabled
2024-12-06 00:01:49 nat[11002]: <6> 211021 L2TP ALG enabled
2024-12-06 00:01:49 nat[11002]: <6> 211021 PPTP ALG enabled
2024-12-06 00:01:49 nat[11002]: <6> 211021 SIP ALG enabled
2024-12-06 00:01:49 nat[11002]: <6> 211021 RTSP ALG enabled
2024-12-06 00:01:49 nat[11002]: <6> 211021 H323 ALG enabled
2024-12-06 00:01:49 nat[11002]: <6> 211021 TFTP ALG enabled
2024-12-06 00:01:49 nat[11002]: <6> 211021 FTP ALG enabled
2024-12-06 00:01:45 nat[11002]: <6> 211501 Initialization succeeded
2024-12-06 00:01:44 nat[11002]: <6> 211501 Initialization succeeded
2024-12-06 00:01:43 led-controller[1410]: <6> 288051 Start to run WAN1_OFF
2024-12-06 00:01:43 led-controller[1410]: <6> 288051 Start to run WAN0_ON
2024-12-06 00:01:43 led-controller[1410]: <6> 288051 Start to run LAN_ON
2024-12-06 00:01:43 led-controller[1410]: <6> 288051 Start to run WAN1_OFF
2024-12-06 00:01:43 led-controller[1410]: <6> 288051 Start to run WAN0_OFF
2024-12-06 00:01:43 led-controller[1410]: <6> 288051 Start to run LAN_ON

  1  
  1  
#3
Options
Re:led-controller[1409]: <6> 288051 Start to run WAN0_OFF
Monday - last edited Monday

  @LordTerror  I am having a very similar problem with my Archer AX72, it start 1 or 2 months ago in my case beside the WAN 0 on and off repeatedly it also have issues with the DHCP from my ISP, having somehow losing connection and the right data from ISP then it goes with DHCP 0.0.0.0 flag 80. But I AM PRETTY SURE THIS START WITH TP LINK ROUTER, NOT WITH MY ISP.

 

Later i will try to run the router only with factory firmware, before this it was with the last firmware and then i try rollback one update but it was not solve.

 

If this continue i have one more TP link router from Aginet as Satellite in network with Easy Mesh, i will try to swap then in place and see if it will solve the issue.

  0  
  0  
#4
Options
Re:led-controller[1409]: <6> 288051 Start to run WAN0_OFF
Tuesday

Hello @LordTerror ,

Thanks for getting back to me.

 

May I know when you bought the router? It seems that the Archer AX50's WAN port may have poor contact.

 

Please contact local support for further help.

 

Check Out the Latest Posts: △ Pre-release Firmware for Archer AX80 Supports EasyMesh in AP Mode, DoH/DoT, ECO Mode, and More △Introducing AI QoS: Elevate Your Gaming Experience on the Archer GE800 Gaming Router △Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN △ Tether KidShield Test Recruitment - Safeguarding Children's Online Experience
  0  
  0  
#5
Options
Re:led-controller[1409]: <6> 288051 Start to run WAN0_OFF
Tuesday

Hello @Pvsman ,

Welcome to our community.

 

Do you mean that you want to switch the main router and Archer AX72 for a comparison?  Have you created an EasyMesh network via Wireless Backhaul between the routers?

If it is Ethernet Backhaul, please connect to the LAN port of the satellite router.

 

I look forward to your reply with the test results.

 

 

Check Out the Latest Posts: △ Pre-release Firmware for Archer AX80 Supports EasyMesh in AP Mode, DoH/DoT, ECO Mode, and More △Introducing AI QoS: Elevate Your Gaming Experience on the Archer GE800 Gaming Router △Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN △ Tether KidShield Test Recruitment - Safeguarding Children's Online Experience
  0  
  0  
#6
Options
Re:led-controller[1409]: <6> 288051 Start to run WAN0_OFF
Yesterday - last edited Yesterday

  @Joseph-TP Hi, i have the AX72 as main router and one Aginet TP link Ex511 as extention to the network using Easy Mesh. So far the problem did not occur yet, it happens between 1 to 5-6 days, the AX complete freezes and i cannot even loggin to know what happen, only after reeboting it go back to normal until it start again.

 

Before all this i was still having another problem with the AX72, it was because the IP information comming from the ISP somehow stopped working given the DHCPC 0.0.0.0 e flag 80 and the WAN 0 switvh from on to off. Since then i change the IP from dinamic to static and also put my ISP modem to brigde mode.

 

I was hoping this would fix my issue but after a few days my internet stopped working and now the router completely freeze.

 

If the problem persist, i will try to swap the routers.

  0  
  0  
#7
Options
Re:led-controller[1409]: <6> 288051 Start to run WAN0_OFF
4 hours ago

Hello @Pvsman ,

Thank you for your reply.

From the information you provided, both the Archer AX72 and Archer AX50 show WAN connectivity issues. This likely indicates a connection problem between the ISP modem and the router.
To rule this out, I suggest connecting your PC directly to the modem when the router's network connection is disconnected and comparing the results.

Alternatively, set the EX511 as the primary router for comparison.

Check Out the Latest Posts: △ Pre-release Firmware for Archer AX80 Supports EasyMesh in AP Mode, DoH/DoT, ECO Mode, and More △Introducing AI QoS: Elevate Your Gaming Experience on the Archer GE800 Gaming Router △Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN △ Tether KidShield Test Recruitment - Safeguarding Children's Online Experience
  0  
  0  
#8
Options
Re:led-controller[1409]: <6> 288051 Start to run WAN0_OFF
4 hours ago - last edited 4 hours ago

  @Joseph-TP 

 

For three days I have done the following: ONU EPON - switch not configured - AX50 and the problem with the WAN port disappeared! Most likely there is a software problem between the AX50 and the EOPN. The physical WAN port of the router now works correctly when it is not directly in the EOPN. Joseph-TP  Can I find the stock firmware for the Archer AX50 v1.0 somewhere so I can test it? Because before a few updates, this problem was gone.

  0  
  0  
#9
Options

Information

Helpful: 0

Views: 278

Replies: 8

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.