TP-link N300 WiFi Wireless Router TL-WR845N is connected but no internet, LED middle one is blinking
My TP-link N300 WiFi Wireless Router TL-WR845N middle led is blinking, device is connected but internet. How to set up it for range extender. I tried to reser the device but the issue remains the same
Hi,
According to the user manual for the TL-WR845N V4 the middle LED blinking can mean the following things:
"Blinking Orange The INTERNET port is not connected while in Router Mode."
"Blinking Green The system is starting up or firmware is being upgraded*."
If you want to use the TL-WR845N as a range extender, then log into its web interface, look for an "Operation Mode" menu and select the mode you want, like shown on the screenshot below.
Hi,
According to the user manual for the TL-WR845N V4 the middle LED blinking can mean the following things:
"Blinking Orange The INTERNET port is not connected while in Router Mode."
"Blinking Green The system is starting up or firmware is being upgraded*."
If you want to use the TL-WR845N as a range extender, then log into its web interface, look for an "Operation Mode" menu and select the mode you want, like shown on the screenshot below.