Model :

Hardware Version : Not Clear

Firmware Version :

ISP :

HI All

Hope you can help me with this. I have three rooms that is very far away from each other. So WIFI does not work. They are Study , Lounge and bedroom. What I have done is pulled in LAN cable throughout all the rooms. The issue I have is with the TL-WR941ND. I ran the setup and it works with the internet over the LAN cable. Where the issue is if you try and use UPNP (like a PlayStation or media server it cannot find it)

So what I did next is I moved the router into the study. Enable WDS or a bridge mode and connected it to the main router. It works and now im able to connect to UPNP devise. I found these settings under the Wireless section.
Unplugged device moved it into another room and internet works but UPNP not working again. Im assuming it enabled the bridge over the wireless.

The question is how do I enable bridge mode but over the lan config and not the WDS.

Hope you can help.

STUDY Setup
Main Router with access to interne. TD-W8980
IP: 192.168.1.1
Subnet 255.255.255

LOUNGE Setup
Linksys E900 setup in bridge mode using a network cable.
IP: 192.168.1.2
Subnet 255.255.255
Gateway : 192.168.1.1