Assigning a wired endpoint client to a non default VLAN without a switch
Hello,
I have a fairly basic setup with
-- Gateway ER605 v1.0 connected to internet
-- Wireless access point EAP660 HD(US) v1.0 for wireless access
-- I use Software based omada controlled to administer the network
-- As of now I have no managed layer 2 or layer 3 omada switch in my network, I do have a off the shelf unmanaged desktop switch
I have very simple VLAN setup with 3 separate VLAN(s) assigned to separate SSID
| Bhokaal-Guest |
Interface |
192.168.100.1 / 24 |
-- |
-- |
-- |
-- |
100 |
|
| Bhokaal-Iot |
Interface |
192.168.10.1 / 24 |
-- |
-- |
-- |
-- |
10 |
|
| Bhokaal-VLAN(Default) |
Interface |
192.168.0.1 / 24 |
-- |
-- |
-- |
-- |
1 |
The wireless access point was directly connected to one of the LAN port of the gateway & devices connecting to separate SSID would automatically get assigned to different VLANs as 3 different SSID each for 1 VLAN. All the wired lan devices are getting assigned to default VLAN ID: 1
I want to move one of the wired client end devices to VLAN ID: 10 (Bhokaal-Iot), but unable to do so.
I have tried
-- DHCP reservation with the client's MAC => which has no effect the client keeps getting a VLAN ID(default): 1 IP
-- I have also tried to set that port on the gateways to the VLAN ID:10 (Bhokaal-Iot) from the device configuration menu => The client doesn't get a valid ip and doesn't come on the network.
Is this possible with my setup ?
If no, if add a simple managed layer 2 switch like ES205G, can I make it work ? or will it need more pieces ?
Please help
Thanks
