1
Votes

VPN Client Split Tunneling by Destination Network on TL-WR3602BE

 
1
Votes

VPN Client Split Tunneling by Destination Network on TL-WR3602BE

VPN Client Split Tunneling by Destination Network on TL-WR3602BE
VPN Client Split Tunneling by Destination Network on TL-WR3602BE
2026-09-13 18:26:43 - last edited a week ago
Model: TL-WR3602BE  
Hardware Version: V1
Firmware Version: 1.3.10 Build 20260423 rel.84399(4555)

Hello TP-Link Support / Development Team,

I would like to request an enhancement to the VPN Client / VPN Merge functionality on the TP-Link TL-WR3602BE (EU V1).

My use case is a travel router connected to the Internet via USB tethering/mobile modem or Wi-Fi WAN, while an OpenVPN client connects to my home router.

The networks are:

  • Travel router LAN: 192.168.1.0/24
  • Home LAN: 192.168.0.0/24
  • Internet connection: USB tethering / mobile modem / Wi-Fi WAN
  • VPN: OpenVPN client to my home network

I need the routing to work as follows:

 

Destination 192.168.0.0/24
    -> OpenVPN tunnel
    -> Home network

All other destinations / Internet
    -> USB tethering / Wi-Fi WAN
    -> Internet

 

In other words, the VPN should be used only to access the remote/home LAN, while normal Internet traffic should continue to use the router's local Internet connection.

The current VPN Merge implementation appears to select the VPN based on the client device ("All Clients" or selected clients). When a client is assigned to the VPN, its Internet traffic is also routed through the VPN.

This does not work for a VPN server configured for home-network access only, where Internet access through the VPN server is intentionally disabled.

What I am requesting is a destination-based VPN routing / split-tunneling option, for example:

 

VPN profile: HomeNetwork
Destination network: 192.168.0.0/24
Interface: OpenVPN

Default route:
Interface: WAN / USB tethering

 

I am not requesting Internet traffic to be routed through the VPN. The VPN should provide access only to specified private remote subnets.

The same feature would also be useful for WireGuard, where only specified AllowedIPs/destination networks should use the VPN while the normal default route remains on the WAN connection.

My router is currently running:

 

TL-WR3602BE
Hardware: EU V1
Firmware: 1.3.10 Build 20260423 rel.84399(4555)

 

 

Specifically, I would appreciate support for either:

  1. Destination-based split tunneling in VPN Merge, or
  2. VPN interface/profile selection in Static Routing.

Both would allow the TL-WR3602BE to keep Internet access through USB tethering/Wi-Fi WAN while routing only the home/private subnet through the VPN.

Thank you.

#1
Options