VX230v Build 260323 — web GUI blank and TR-069 fails every ~2 days since firmware update

VX230v Build 260323 — web GUI blank and TR-069 fails every ~2 days since firmware update

VX230v Build 260323 — web GUI blank and TR-069 fails every ~2 days since firmware update
VX230v Build 260323 — web GUI blank and TR-069 fails every ~2 days since firmware update
2026-09-21 12:26:12 - last edited 2026-10-05 13:18:19
Model: VX230v  
Hardware Version: V1
Firmware Version: 0.19.0 2.0.0 v606c.0 Build 260323 Rel.23006n

VX230v Build 260323 — web GUI blank and TR-069 fails every ~2 days since firmware update

 

ISP-supplied VX230v (UK, IDNet), firmware 0.19.0 2.0.0 v606c.0 Build 260323 Rel.23006n, hardware v1.

Since updating to this build on 4 September, the router's management side fails roughly every two days. The web GUI at 192.168.1.1 returns a blank page, the Aginet app can't connect, and my ISP's portal can't reach the device over TR-069 either — all three go down together and all three come back after a reboot.

Routing is completely unaffected throughout. Speeds hold steady at 940–980 Mbps with no drops, and the WAN session stays up. It's purely the management processes.

What I've tried:

  • ISP disabled TR-069 polling for 24 hours, then re-enabled it. Failed in both states, so polling isn't the trigger.
  • Factory reset of the router — though note it restored my config from a stored default rather than clearing it, so a genuinely clean config has never been tested.
  • Factory reset of my Archer AX55 satellite and a fresh EasyMesh pairing from scratch. Still failed after two days.
  • Memory sits around 48–56% and doesn't climb noticeably before failure, so it doesn't look like simple exhaustion.

My ISP can't downgrade the firmware — they say the router won't accept older builds.

Two questions:

  1. Is anyone else on Build 260323 seeing this? I'm particularly interested in anyone with VoIP active, since my router re-registers with the SIP server every 60 seconds and that's a lot of activity on the same side of the device that keeps failing.
  2. I notice the release notes for an earlier platform build list fixes for the web GUI crashing and for intermittent CWMP process crashes triggered by a Get Parameter Attributes call. Is it possible this is a regression of that?

 

Any pointers appreciated.

  1      
1
#1
Options
1 Accepted Solution
Re:VX230v Build 260323 — web GUI blank and TR-069 fails every ~2 days since firmware update-Solution
2026-09-22 10:44:17 - last edited 2026-10-05 13:18:19

Hello @RunuAli ,

Welcome to our community.

 

This appears to indicate an issue accessing the router's management interface. Since the VX230v is an ISP-customized model, we recommend contacting the ISP's support team or local technical support as soon as possible for faster assistance.

If you provide feedback via email, please attach relevant screenshots (including the failed access to the management interface).

 

Best Regards.

 

 

 

Welcome to our Community! Latest Pre-Release firmware: ▷Archer BE550 V2 Enhances EasyMesh Support with Guest/IoT/MLO Extension ▷Archer GE550/GE650 V2 Introduces AI QoS, VPN Enhancements More posts, please see: ▷Get the Ongoing Pre-release Firmware for Wi-Fi Routers Here! Contact via Messages or @Joesph-TP in your new post for urgent problems (not online 24/7). Click Recommended Solution if the post/answer helps.
Recommended Solution
  0  
0
#2
Options
7 Reply
Re:VX230v Build 260323 — web GUI blank and TR-069 fails every ~2 days since firmware update-Solution
2026-09-22 10:44:17 - last edited 2026-10-05 13:18:19

Hello @RunuAli ,

Welcome to our community.

 

This appears to indicate an issue accessing the router's management interface. Since the VX230v is an ISP-customized model, we recommend contacting the ISP's support team or local technical support as soon as possible for faster assistance.

If you provide feedback via email, please attach relevant screenshots (including the failed access to the management interface).

 

Best Regards.

 

 

 

Welcome to our Community! Latest Pre-Release firmware: ▷Archer BE550 V2 Enhances EasyMesh Support with Guest/IoT/MLO Extension ▷Archer GE550/GE650 V2 Introduces AI QoS, VPN Enhancements More posts, please see: ▷Get the Ongoing Pre-release Firmware for Wi-Fi Routers Here! Contact via Messages or @Joesph-TP in your new post for urgent problems (not online 24/7). Click Recommended Solution if the post/answer helps.
Recommended Solution
  0  
0
#2
Options
Re:VX230v Build 260323 — web GUI blank and TR-069 fails every ~2 days since firmware update
2026-09-22 12:02:22 - last edited 2026-10-05 13:18:18

  @Joseph-TP 

Thanks for the reply.

I've already been through my ISP's support team over the past two weeks. They've carried out the tests they could, can't downgrade the firmware, and have pointed me to the manufacturer warranty. The router was supplied on 28/10/2024, so it's within the two year period.

I did also phone TP-Link UK, who said they'd raise it with the account manager responsible for IDNet.

I'll send the screenshots through by email once the fault next occurs — it's roughly every two days. In the meantime, is anyone else on Build 260323 seeing this, particularly with VoIP active?

  1  
1
#3
Options
Re:VX230v Build 260323 — web GUI blank and TR-069 fails every ~2 days since firmware update
2026-09-28 08:53:26

We also welcome other users to share their experiences.

Welcome to our Community! Latest Pre-Release firmware: ▷Archer BE550 V2 Enhances EasyMesh Support with Guest/IoT/MLO Extension ▷Archer GE550/GE650 V2 Introduces AI QoS, VPN Enhancements More posts, please see: ▷Get the Ongoing Pre-release Firmware for Wi-Fi Routers Here! Contact via Messages or @Joesph-TP in your new post for urgent problems (not online 24/7). Click Recommended Solution if the post/answer helps.
  0  
0
#4
Options
Re:VX230v Build 260323 — web GUI blank and TR-069 fails every ~2 days since firmware update
3 weeks ago

@RunuAli @Joseph-TP  I have a similar issue with my TP-Link VX1800v and have posted about it here: Archer VX1800v – Web Management Interface Hangs While Internet and Routing Continue Working - Home Network Community

 

The VX1800v doesn't seem to be part of the Aginet product line (it's just a normal retail router), but it runs a similar firmware to the VX230v.

 

Unfortunately, the TP-Link local support has been unable to assist so far due to the random nature of this issue. They instead suggested that I should go through the RMA process or try downgrading the firmware.

 

From my research, I think the issue is likely due to some kind of memory leak affecting the central management daemon, which is what handles the connections made by Tether, TR-069, and other protocols used to manage the router (even TELNET didn't work for me).

 

I'm currently testing to see if disabling EasyMesh makes a difference, since it is the only other thing related to the network management that could have something to do with this.

 

If that doesn't work, I'll try downgrading the firmware and see what happens.

  0  
0
#5
Options
Re:VX230v Build 260323 — web GUI blank and TR-069 fails every ~2 days since firmware update
3 weeks ago

  @hass_m sounds good, in the end I had mine swapped through RMA and I am waiting to receive it but not sure what firmware is on the replacement. 

 

I sourced a tp ink Ex820v from ebay which is a brsk model but if works fine so far the router is behaving and I will continue to monitor it. 

 

I believe you could be right about the memory leak, over time the router will start to really slow down and within 2 - 3 days the management page just stops working.  It definitely happened after the firmware update for sure. 

 

Let me know how you get on I couldn't go back to the previous firmware. 

  0  
0
#6
Options
Re:VX230v Build 260323 — web GUI blank and TR-069 fails every ~2 days since firmware update
a week ago

Thanks for the update, @RunuAli, and good luck with the replacement unit.

 

A quick follow-up from my side: since disabling EasyMesh on my VX1800v and leaving it running for a while, it has now run for almost 3 weeks without the management services hanging, whereas before it hung every few days. That’s just on my router, so I wouldn’t confidently say that could be the fix for everyone else experiencing similar issues, but it’s the first thing that has made a difference for me.

 

Since you run EasyMesh with an AX55 and the hang followed the firmware update, it might be worth testing with EasyMesh fully disabled, if the issue reappears and if you can live without EasyMesh for a while.

 

On the memory leak idea: I originally suspected that too, but my memory usage stayed flat at about 45% right up to the hang, and your thread mentioned 48-56% with no climb. So it may be more like a table or entry limit filling up than memory itself. Error 9812 (“number of entries has reached its limit”), reported on another VX1800v thread and on other router models as well, fits that picture, though it’s only a guess.

 

I have updated my support ticket with these details and also mentioned your thread for reference, so it should be on their radar. 

Either way, let me know if you notice anything different with the replacement unit and also which firmware version it ships with.

  2  
2
#7
Options
Re:VX230v Build 260323 — web GUI blank and TR-069 fails every ~2 days since firmware update
a week ago

  @RunuAli @hass_m

 

Thanks for the update, and good to hear you’ve had three weeks clear — that’s the longest stretch either of us has managed.

Your table limit idea makes more sense than the memory leak. It would explain why memory stayed flat for both of us right up to the hang, and it would also explain the erratic timing. Mine varied from under an hour to three days, which never fitted anything running on a fixed cycle.

Two things from my side that may be relevant.

I had a scheduled monthly reboot configured, and while the fault was active it failed to fire — the router just ran past the scheduled time. So whatever goes down takes the scheduler with it, not just the web interface and the management protocols.

And on EasyMesh: I moved the same AX55 across to the EX820v unchanged, still running EasyMesh, and the fault hasn’t followed it. Twelve days up now with no issues. So EasyMesh may well feed whatever is filling up, but it doesn’t look like the root cause on its own.

Worth mentioning too that I could never properly test a clean configuration. A factory reset on my VX230v restored a stored default rather than clearing — I proved it by adding a dummy DHCP reservation, resetting, and finding that was the only thing removed. If your VX1800v behaves the same way, any config-based test would be invalid without you realising. Worth checking before you spend time on one.

Still waiting on the replacement, so no firmware version to report yet. I’ll post when it arrives.

  0  
0
#8
Options