Home Network Community >
Accessories >
How to configure a TL-WA7210N access point to work with a TL-ANT2412D outdoor antenna
How to configure a TL-WA7210N access point to work with a TL-ANT2412D outdoor antenna
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to configure a TL-WA7210N access point to work with a TL-ANT2412D outdoor antenna
Posts: 5
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-03-09
How to configure a TL-WA7210N access point to work with a TL-ANT2412D outdoor antenna
2017-03-09 19:17:15
Tags:
Model :
Hardware Version :
Firmware Version :
ISP :
I installed an access point (TL-WA7210N) inside a warehouse but close to the entrance. I have excellent coverage within the warehouse and immediately outside the warehouse. I want the signal to get to the gates of the premises which is about 20 meters away. At the gates, my WiFi signal is very weak and I am not able to access the internet seamlessly.
I then purchased a TP-Link TL-ANT2412D omni directional outdoor antenna and connected it to the access point via pigtail cable. I changed the "antenna settings" to external antenna on the Wireless advanced configuration page but I still cannot get reliable signals by the gate.
A diagram of what my setup looks like is attached
.
I have not mounted the antenna yet. I made the connections and walked out of the entrance of the warehouse for about 10m meters but i still did not get reliable signals even when i was just 5 meters away from the antenna.
Is there anyway to check that the antenna is actually working or is recognized by the access point?
Please is there something i am not doing or am doing wrong? Looking forward to hearing from someone.
Hardware Version :
Firmware Version :
ISP :
I installed an access point (TL-WA7210N) inside a warehouse but close to the entrance. I have excellent coverage within the warehouse and immediately outside the warehouse. I want the signal to get to the gates of the premises which is about 20 meters away. At the gates, my WiFi signal is very weak and I am not able to access the internet seamlessly.
I then purchased a TP-Link TL-ANT2412D omni directional outdoor antenna and connected it to the access point via pigtail cable. I changed the "antenna settings" to external antenna on the Wireless advanced configuration page but I still cannot get reliable signals by the gate.
A diagram of what my setup looks like is attached
.
I have not mounted the antenna yet. I made the connections and walked out of the entrance of the warehouse for about 10m meters but i still did not get reliable signals even when i was just 5 meters away from the antenna.
Is there anyway to check that the antenna is actually working or is recognized by the access point?
Please is there something i am not doing or am doing wrong? Looking forward to hearing from someone.
#1
Options
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thread Manage
Posts: 5
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-03-09
Information
Helpful: 0
Views: 2413
Replies: 9
Voters 0
No one has voted for it yet.
Tags
Related Articles
Report Inappropriate Content
Transfer Module
New message