Deco M9 - Second node performance drop?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Recently got Deco M9 - 2 pack. I have 8-9 devices connected at all times.
When I check the internet speed on the primary node thats connected to modem - it shows 210 mbps
When I check the internet speed on second node thats 3 rooms away - the network speed is onlny 130 - 150mbps
Is this how it works for everyone or do I have a bad piece of hardware? This was not how my old 2 pack Netgear Orbi used to work.
Note: I made sure to disable wifi - walked to the room where the second node is & then connected to wifi to make sure I was connected to secondary node. Checked and confirmed on the app that my device is connected to secondary node.
SNR is Signal to Noise Ratio on wifi communications. Sometimes you have great signal but some noise and speed drop.
Get on APP/Software to see how your SNR from Deco 1 on place of Deco 2. If below of 30/35 you need put Deco 2 near Deco 1.
(This is my network with four Deco M5) on 4500sq ft multi story house. Don't have any trouble here.
Q1 S1 Linked via Ethernet and Q3 and S2 Wifi
