Home Network Community > All Threads > Range Extenders Support OneMesh/EasyMesh in AP Mode
< All Threads
 
159
Votes

Range Extenders Support OneMesh/EasyMesh in AP Mode

123...
 
159
Votes

Range Extenders Support OneMesh/EasyMesh in AP Mode

Range Extenders Support OneMesh/EasyMesh in AP Mode
Range Extenders Support OneMesh/EasyMesh in AP Mode
2021-09-23 11:44:22 - last edited 2023-12-14 01:15:27

Hey everyone!

We got some feedback from our community users requesting for Range Extender to support OneMesh/EasyMesh when works as an Access Point.

Currently,  OneMesh/EasyMesh is not supported when the extender is set to Access Point Mode. However it is planned to support EasyMesh over Ethernet Backhaul under Range Extender mode.

It will start with RE315_V1 and gradually be added to other EasyMesh-supported extenders.

RE315 Supports EasyMesh Over Ethernet Backhaul

Note:

1. An extender needs to support EasyMesh (over Wi-Fi) first, then supports EasyMesh over Ethernet Backhaul.

2. Ethernet Backhaul only works when both your main router and satellite extender support EasyMesh over Ethernet Backhaul.

 

Other Mesh Options: 

Option 1:  Deco mesh system supports Ethernet backhaul under both Wireless Router and Access Point modes.

Deco Ethernet Backhaul feature and Topology

Kindly note that the Deco system is different from TP-Link OneMesh >>> TP-Link OneMesh™ VS Deco Mesh: What's the Difference?

Option 2:  OneMesh---Compatible Powerline devices if your house is under the same power circuit/under the same power meter

Some powerline products could build OneMesh through Ethernet & house Power line

Powerline units that supports OneMesh 
How to configure OneMesh with seamless roaming (Powerline Extender)

 

Related Articles:

Several questions about the OneMesh™ and Mesh

How to build an Ethernet Backhaul using TP-Link EasyMesh Range Extenders

RE315 Supports EasyMesh Over Ethernet Backhaul

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
#1
Options
238 Reply
Re:[Range Extender] OneMesh Supports Ethernet Backhaul
2021-10-14 19:24:34 - last edited 2022-10-27 08:21:35
Hi, ive just purchased a Re550 to use one mesh with my VR2100, I had again assumed it would support an ethernet backhaul. So disappointed it doesn't, I would absolutely support this if its possible.
#2
Options
Re:[Range Extender] OneMesh Supports Ethernet Backhaul
2021-10-29 11:12:15 - last edited 2022-10-27 08:21:35

Hi @Solla-topee 

 

I have the following products from TP-Link expecting them to have ethernet backhaul as I have ethernet wiring around the house, particularly as my router is in a utility cupboard surrounded by metal:

 

AX1800 Wi-Fi 6 Router
Hardware: Archer AX20 v1.0
Firmware: 1.3.1 Build 20210524 rel.40909(4555)
Country: UK

 

AX1800 Wi-Fi Range Extender
Hardware: RE605X v1.0
Firmware: 1.0.4 Build 20210507 Rel. 151958
Country: UK

 

I would request these are enabled to have OneMesh ethernet backhaul.

#3
Options
Re:[Range Extender Feature Request] OneMesh Supports Ethernet Backhaul
2021-11-10 11:46:33 - last edited 2022-10-27 08:21:35

@Solla-topee 

 

I will definitely support the A.P. with Ethernet Backhaul solution!!

 

Running:

TP-LINK AX73 with latest firmware V1_210717

2x RE505X(EU) V1 with the latest firmware V1_210511

 

On the verge of buying an RE605X(EU) V1 (or is it V2 these days?)

 

Due to the Onemesh implementation, the RE's are now setup as Extenders (NOT preferred!)

Preferred solution needed: The RE's setup as A.P.'s with Ethernet Backhaul as at my home the CAT6 STP LAN-cables are already in place to connect to the AX73.

 

Please implement as soon as possible.

My guess is that a lot of customers are going to be very happy.

 

Greetings from the Netherlands.

Thank you and have a great day!

#4
Options
Re:[Range Extender Feature Request] OneMesh Supports Ethernet Backhaul
2021-11-14 15:39:07 - last edited 2022-10-27 08:21:35

@Solla-topee 

 

Hi, I bought the RE605X thinking that it would support OneMesh Ethernet Backhaul. I would really like to get that feature.

 

I don't also quite understand how I could use the powerline connection with my

Archer AX6000 router and RE605X, do I need additional powerline adapters for it?
 
Thanks!
#5
Options
Re:[Range Extender Feature Request] OneMesh Supports Ethernet Backhaul
2021-11-14 15:55:38 - last edited 2022-10-27 08:21:35
I mean do I need to buy powerline adapter to the router end and the RE605X works without that adapter or what?
#6
Options
Re:[Range Extender Feature Request] OneMesh Supports Ethernet Backhaul
2021-11-15 06:54:44 - last edited 2022-10-27 08:21:35

Hello@miero 

Thank you for asking, Powerline and Range Extenders are two separated network extension solutions, we recommend use either Powerline extender or Range extender in your house, not both. As RE currently does not support OneMesh when it works as an AP, we list  onemesh-compatible powerline extender if you want to wish to replace RE using a different kind of network extension products.  (powerline kit requires need to be paired under same house or same powerline)

 

 

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
#7
Options
Re:[Range Extender Feature Request] OneMesh Supports Ethernet Backhaul
2021-11-15 17:27:39 - last edited 2022-10-27 08:21:35

@Solla-topee 

 

Hi,

 

Ok thanks, that makes sense. I already have a 4 unit TP-link WiFi5 mesh in addition to the WiFi6 Archer AX6000 router and RE605X, so I probably just wait for new products. RE605X seem a bit old now compared to the latest TP-link WiFi6 mesh devices.

#8
Options
Re:[Range Extender Feature Request] OneMesh Supports Ethernet Backhaul
2021-11-15 18:06:20 - last edited 2022-10-27 08:21:35

@Solla-topee 

 

Hi,

 

I would have an additional question, can I connect my existing Deco M5 units and Deco M9 Plus unit as satellites and use a new Deco X90 as the main unit using Powerline Backhaul with all of them and expect the setup to work well together?

 

This documents kind of suggest so, but do WIFi5 and WiFi6 really work well together while using Powerline Backhaul?:

 

https://www.tp-link.com/us/support/faq/2248/

 

#9
Options
Re:[Range Extender Feature Request] OneMesh Supports Ethernet Backhaul
2021-11-16 18:49:32 - last edited 2022-10-27 08:21:35

I have AX20(EU) v1 + RE505X(EU) v1 and really miss the ethernet backhaul, as my house floors are separated with reinforced concrete. For now I disconnected the RE505X, as it made connection quality worse. Please implement the backhaul, I do plan to sell the router and the extender otherwise...

#10
Options
Re:[Range Extender Feature Request] OneMesh Supports Ethernet Backhaul
2021-11-17 03:21:12 - last edited 2022-10-27 08:21:35

Hello @YuriGavshin 

Ethernet connection still works when set RE in AP mode but it's not a seamless mesh yet, thank you for your idea, I will pass along feedback here to our team regular for evaluation.

How to setup Access Point Mode of Range Extender?

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
#11
Options
123...

Information

Helpful: 159

Views: 41678

Replies: 239

Voters 130

voter's avatar
voter's avatar
voter's avatar
voter's avatar
+ 126 Voters
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.