Model :

Hardware Version :

Firmware Version :

ISP :

Hi there I am in need for some expert skill advice on setting up my family network best püractise way.


Internet connection is given by ISP Vodafone KabelDeutschland using a AVM FritzBox Cable.
As the AVM Cable is in the cellar, the WiFi wont reach other areas in the house (i.e. my broher‘s room under the roof, or my room on 1st floor).


So we got a WR841ND V7 connected basement/cellar AVM by LAN cable with the WR841N in the groundfloor (living room area, garden etc)


We also got two TL-WPA2220KIT V1 to expand WiFi in the house.

TL-PA2010 from AVM to the rest of the house.
[*]TL-WPA-2220 on groundfloor
[*]TL-WR841ND V7.0 groundfloor (+ sometimes AWPA2220 for the garden)
[*]TL-PA210 + WR841 1[SUP]st[/SUP] floor
[*]TL-WPA-2220 2nd Floor

Current configuration feels wrong.
Not each device in each WiFi can see all others.
Each WPA2220 and the AVM and the WR841N send a different WiFi SSID, alle are connected somehow but I can not reach a printer in the 1[SUP]st[/SUP] floor from the living room WiFi or can’t see the IPCAM from groundfloor from roof Wifi etc.


Is it possible to reconfigure all TP-Link devices WPA2220 and WR841N as access-points and get the internet connection and DHCP stuff done by the AVM FritzBox Cable?


Any other suggestion?


I did try to scetch down: