Home

Forums

Stories

Knowledge Base

Smart Home Community > All Threads > Tapo C210 WiFi Cam with Green-Slow Blink and not able to Reset

< All Threads

Tapo C210 WiFi Cam with Green-Slow Blink and not able to Reset

Comet7

a week ago - last edited 14 hours ago

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-11-17

Tapo C210 WiFi Cam with Green-Slow Blink and not able to Reset

a week ago - last edited 14 hours ago

Tags: #Device Connectivity #Firmware #Tapo Care

Model: Tapo C210

Hardware Version: V1

Firmware Version:

Tapo C210 WiFi Camera not Working. LED Indication is slow blinking Green- always.

Connection to the App is lost. RESET not working by pressing the button.

Also tried the following-

Tried Multiple restarts and pressing re-set switch - Not recovering.
Tried pressing the RESET Switch, Still Slow Blinking Green. NOT going to Set UP mode (Red Green alternate).
Tried Manual Firmware Upgrade with SDCard. . After removing SD card and power OFF -ON. Still slow Green blinking. RESET also not working.

Please advise what to be done next !!!

1 Accepted Solution

Solla-topee

a week ago - last edited 14 hours ago

Posts: 13425

Helpful: 2312

Solutions: 1956

Stories: 8

Registered: 2020-05-19

Re:Tapo C210 WiFi Cam with Green-Slow Blink and not able to Reset-Solution

a week ago - last edited 14 hours ago

@Comet7

Hi,
1. Please press the reset button for 10 seconds to factory reset the camera, and check if the camera responds to the reset operation.

2. Please ensure the internet is stable and the router has a strong signal, power off the camera, move it close to the router, power on the camera, wait for 10 minutes, and check if the camera's LED will change.

3. If the issue remains, it's recommended to contact your retailer or local team to check if the camera is under warranty.

Best Regards

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.

Recommended Solution

1 Reply

Solla-topee

a week ago - last edited 14 hours ago

Posts: 13425

Helpful: 2312

Solutions: 1956

Stories: 8

Registered: 2020-05-19

Re:Tapo C210 WiFi Cam with Green-Slow Blink and not able to Reset-Solution

a week ago - last edited 14 hours ago

@Comet7

Hi,
1. Please press the reset button for 10 seconds to factory reset the camera, and check if the camera responds to the reset operation.

3. If the issue remains, it's recommended to contact your retailer or local team to check if the camera is under warranty.

Best Regards

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.

Information

Helpful: 0

Replies: 1

Tapo C210 WiFi Cam with Green-Slow Blink and not able to Reset

Tapo C210 WiFi Cam with Green-Slow Blink and not able to Reset

Information

Voters 0

Tags