Smart Home Community > All Threads > Kasa Smart Switch HS220 - Can't switch to WIFI mode, Bluetooth Connection Won't Work
< All Threads

Kasa Smart Switch HS220 - Can't switch to WIFI mode, Bluetooth Connection Won't Work

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Kasa Smart Switch HS220 - Can't switch to WIFI mode, Bluetooth Connection Won't Work

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Kasa Smart Switch HS220 - Can't switch to WIFI mode, Bluetooth Connection Won't Work
Kasa Smart Switch HS220 - Can't switch to WIFI mode, Bluetooth Connection Won't Work
2025-02-02 00:32:46 - last edited 2025-07-18 11:14:57
Model: HS220  
Hardware Version:
Firmware Version:

I have 6 KASA HS220's and 5 of them work like a charm. However the 6th one is having issues - no matter how many times I reset, power on and off, or hold reset for minutes at a time, the blinking circle will not switch to the wifi symbol. When I try to connect using wifi setup mode on the blinking circle, it initially connects to my home network but then during the second phase it fails to connect every time. When I try using Bluetooth mode, it quickly fails to find any device at all. At this point I think I'm dealing with a dud because I don't know of any other way to get the wifi symbol to show up. Help!

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Kasa Smart Switch HS220 - Can't switch to WIFI mode, Bluetooth Connection Won't Work-Solution
2025-02-06 01:25:12 - last edited 2025-07-18 11:14:57

  @Kilonova 

 

Check whether all of your HS220 are the same hardware version. Devices with different hardware versions may have variations in configuration methods and appearance. You may double-check the configuration method of this switch on its package box. How to find the hardware version on a TP-Link device

 

What's the status of the circle led before the setup? What's the error message you receive?

 

You may refer to this article for troubleshooting. What should I do if I fail to configure the Kasa device?

▶ Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Kasa Smart Switch HS220 - Can't switch to WIFI mode, Bluetooth Connection Won't Work-Solution
2025-02-06 01:25:12 - last edited 2025-07-18 11:14:57

  @Kilonova 

 

Check whether all of your HS220 are the same hardware version. Devices with different hardware versions may have variations in configuration methods and appearance. You may double-check the configuration method of this switch on its package box. How to find the hardware version on a TP-Link device

 

What's the status of the circle led before the setup? What's the error message you receive?

 

You may refer to this article for troubleshooting. What should I do if I fail to configure the Kasa device?

▶ Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 453

Replies: 1

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.