Most frequent questions about TP-Link Powerline adapters

Опубликовано: 2018-11-26 11:13:36Последнее обновление: 2021-10-09 07:18:53

Q: What can I do if the Powerline adapters do not work automatically via “plug & play”?

A: In most cases, our Powerline adapters will pair up automatically. If not, please press the pair button on each unit to pair them up, or use the Powerline Utility to pair the adapters. For detailed instructions, please refer to FAQ 258

 

Q: How do I add a new Powerline adapter to an existing Powerline network?

A: You can use the pairing button feature to add a new adapter, or use the Powerline Utility. For detailed instructions, please refer to FAQ 319

 

Q: How do I clone my router's WiFi if pressing the WPS buttons do not work, or if there is no WPS button on my router?

A: You can manually configure the Powerline extender’s wireless name and password to be the same as the router's through the Powerline extender's web interface. For detailed instructions, please refer to FAQ 398.

 

Q: How can I configure the Powerline adapters on MAC or Ubuntu OS?

A: For MAC 10.6 or later, we offer the Powerline Utility and Powerline Scan Utility to manage our Powerline adapters.

For Ubuntu or older versions of macOS, we do not provide configuration utilities. Instead, please configure the adapters on Windows OS, then use the pair buttons and web interface to configure our wireless Powerline adapters.

How to secure (pair) the Powerline Network

How Do I Secure My Wireless Powerline Extender on a Mac Computer? 

 

Q: Are all TP-Link Powerline adapters compatible with each other? Are TP-Link Powerline adapters compatible with adapters of other brands?

A: TP-Link Powerline adapters utilize HomePlug AV/AV2 Standards, which means all of our Powerline adapter models are compatible with each other and can be used within the same network. However, please bear in mind the overall Powerline rate will adaopt the lowest HomePlug AV standard rate when using various TP-Link Powerline adapter models in the same network.

For adapters of other brands, if they adopt the same standard, they may be compatible with TP-LINK adapters. However, please bear in mind that different brands’ products will have different methods to pair and configure the adapters. As a result, we suggest it might using Powerline adapters from the same brand to ensure convenience and compatibility.

 

Q: Can several Powerline networks exist simultaneously in same power circuit?

A: Yes. The Powerline networks can be separated by different network names. About how to change the network name, it can be made by the pair button or attached Utility. However, the overall throughput is shared by the multiple networks, please be informed of this. Please refer to the FAQ 258 to change the Powerline network names.

 

Q: How many Powerline adapters can be paired together?               

A: The amount can vary depending on the models used. For more detailed information, please refer to FAQ 434

 

Q: Why can't my Powerline rate reach the reference speed?

A: The theoretical maximum channel data transfer rate of Powerline adapters is derived from HomePlug AV specifications. Actual data transfer rate will vary from network environment variables including, but not limited to: distance between adapters, network traffic, noise on electrical wires, building material and construction, quality of electrical installation and other adverse conditions.

 

Q: What can I do if my Powerline rate is very slow?

A: Powerline products transmit data through the electrical wiring of your house. The Powerline network rate is mainly decided by the quality of the electrical wiring environment. Please refer to FAQ 409 for suggestions.

 

Q: Can TP-Link Powerline adapters work in different phases of three-phase circuit?

A: Yes, but the Powerline rate will be affected when crossing the phases. For three-phase four-line circuit, we suggest using the topology below for optimal results.

 

Q: If I have numerous Powerline adapters in the same network, will network bandwidth be affected?

A: While in the same private Powerline network, all connected devices share available bandwidth.

 

Q: Can TP-Link Powerline adapters work in multi-voltage circuits?

A: Yes. The voltage range that Powerline adapters can work with is 100-240V, and general voltage fluctuation will not affect stability.

 

Q: Can Powerline adapters work if they are separated by UPS?

A: No. Usually, UPS devices will have filtering functions, which can prevent a Powerline connection. Some power outlets and circuit breakers may also have surge, ground-fault, or arc-fault protection functions, which can also interfere with, or prevent Powerline connectivity. We do not recommend using Powerline adapters in such environments.

 

Q: Can Powerline adapters work if they are separated by different electrical circuits?

A: The answer in this case may vary depending on which HomePlug AV standard is in use (HomePlug AV vs. HomePlug AV2). For HomePlug AV Powerline adapters, each adapter should be on the same circuit (breaker) for optimal results. If the adapters can pair in the same room, but the Powerline LED turns off when you move one Powerline device to another area, this usually indicates they are plugged into separate electrical circuits, thus preventing them from communicating. In such cases, please try different locations. However, the HomePlug AV2 standard introduces new technology and features, allowing Powerline adapters to communicate as long as they are on the same main circuit (panel).

 

Q: What can I do if I don't have Internet after connecting to a Powerline network?

A: Please refer to FAQ 392 for troubleshooting steps.

 

Q: Do I need to reset the Powerline adapters/extenders if I’ve changed my router?

A: Not necessarily. As long as you retain the existing configuration in which the Powerline adapters/extenders connect to your router, a reset shouldn't be required. If you need to adjust the wireless settings of any Powerline WiFi extenders in order to match the new router’s settings, please press the WPS button on the router and then Wi-Fi button on the adapter; or refer to FAQ 398.

 

Q: Why do my Powerline adapters interfere with some other devices?

A: The HomePlug AV/AV2 protocol utilizes the same frequency as some other devices within your home. As a result, Powerline products may interfere with devices such as lighting systems that have a dimmer switch, or a touch-sensitive on/off feature, short wave radios, cable television system, VDSL devices, speakers, or other Powerline devices that do not follow the HomePlug AV/AV2 standard.

 

Q: Can appliances affect the performance of Powerline products?

A: Yes, please refer to FAQ 882 for detailed information.

22
Комментировать

Thank You so much for this information on Tp Link Adapter Fixing for you are like a Doctor

This is actually very useful and well done. Thank you.

Actions speak louder than words.

@HotModel Which router do you have? I can change my password by entering the IP in the address bar and (normaly 192.168.1.1). After that I can choose to change the password.

Actions speak louder than words.

Wifi Extender setup is designed to keeping gaming lovers in mind. It doesn't make it a gaming exclusive device. There are various model of router that provides you
internet connectivity. But after sometimes it creates technical issues. But we are proving the step by step solution of New extender setup. if you need this visit our
websites fast.

We are the best mywifiext local service provider who offers benefits to our customers & users. https://mywiifilext.com/netgear-genie-setup/

Nighthawk Login is the first and foremost step to configure your router and the wireless network. But, at times, users find the Netgear Nighthawk router login process a bit complex and can’t do it from their own. If this is the case with you, we are here to help you! Here, we have listed all the essential steps that one needs to follow for Netgear Nighthawk router login. Let’s take the plunge and get to know the complete process. For more information you can visit on Netgear Nighthawk Setup. For more info visit on ou website link which is here nighthawklogin.net

I have two PV (Solar Power) Inverters and each one has an Ethernet connection in order to send data through the router to the manufacturer's site, so both them and I monitorize the production and see live and previous curves in my PC.

One of the inverters has been working that way for over two years, using the TL-PA551 connected to the inverter and to the router.

Now that I have two inverters, and this is my question, can I use a pair of  TL-PA4020p units (dual Ethernet ports), to connect each inverter to one of them and on the other side, by the router both ports to the router??

Best regards and take care.

I have an AV600 extender which recently when connected tells me it has poor security. I don’t know how to alter the security settings on this, (can’t find the instruction book that came with the plug!)

can anyone help me with very simple instructions as Tom how to do this please?

I have already set up the TP-link, trying,. How do I get a password to connect?

Helpful Information. This ingormation is do useful for me realeted to "How do I add a new Powerline adapter to an existing Powerline network?" Thanks for sharing this artical with us. 

It would be very useful; also, if we can be told if a WiFi Extender can be inserted into a power point in the Powerline system to give added Wifi coverage.

12345...
upload
    upload