Home Network Community > Deco > BE25 Backhaul issues in Access Point Mode
< Deco

BE25 Backhaul issues in Access Point Mode

BE25 Backhaul issues in Access Point Mode

BE25 Backhaul issues in Access Point Mode
BE25 Backhaul issues in Access Point Mode
Wednesday
Tags: #Backhaul Method #Access Point Mode #Wi-Fi 7 #Wired Backhaul
Model: Deco BE25  
Hardware Version:
Firmware Version: 1.17

Hi All,

 

We've have had a crap home network in our 3 floor town home for years. We recently upgraded and this is what I did (and this is my problem).

 

I have a cable modem (in the basement where the cable comes in) with an Ethernet out to a new Archer BE3500.

I have created a very stable wired network using my existing regular coaxial and using MoCA 2.5Ghz adapters.

I have the BE3500 with the WIFI turned off.

I have a set of 3 WIFI 7 Deco BE25's. Main Deco is connected directly to the BE3500 and the two satellite Deco's are via WIFI and they are setup ith Access Point Mode.

Lastly, two streaming boxes provided by the cable company that are Ethernet based.

 

I have the network setup and everything appears great. Everything works!

 

My problem lies with trying to setup the top floor Deco for Ehernet Backhaul. I thought it would be as simple as plugging in the Ehernet to the upstairs Deco and using a patch cable to the streaming box. Unfortunately, when I do that, the whole network goes to hell. No TV, Deco's show green but no internet.

 

I'm feeling like I'm missing something really basic or perhaps the Deco doesn't support this? Anyone have any ideas please? I can continue with the existing setup with little pain but I would really like to take advantage of the added benefit of the backhaul at the furthest point away from the main unit.

 

Thanks in advance.

 

  0      
 
  0      
 
#1
Options
6 Reply
Re:BE25 Backhaul issues in Access Point Mode
Wednesday

  @Cymru1 

 

Thanks for reaching out! I understand that you have a Deco BE25 mesh system in Access Point mode, and while your Wi-Fi backhaul is working well, you're experiencing network failures when trying to set up Ethernet backhaul for your top-floor satellite Deco by connecting it to your streaming box.

About Ethernet Backhaul:
Ethernet Backhaul is a feature that allows different Deco units to transmit data via Ethernet (wire) instead of Wi-Fi (wireless), increasing throughput and optimizing network stability. Once Ethernet backhaul is established, Wi-Fi backhaul will be disconnected automatically, and the Deco app will display the backhaul status as "Ethernet."

The Issue with Your Current Setup:
The problem you're experiencing is likely due to improper network topology. Connecting your satellite Deco through the streaming box can create network loops or other connectivity issues. Improperly connected Ethernet cables can lead to severe network issues, such as network loops and broadcast storms.

Correct Ethernet Backhaul Setup:
For proper Ethernet backhaul, you need to connect your satellite Deco units directly back to the main Deco or through a network switch • not daisy-chained through other devices like streaming boxes. Here are the correct ways to use Ethernet Backhaul: https://community.tp-link.com/en/home/forum/topic/98898

In your case with MoCA adapters, the satellite Deco should connect to a MoCA adapter that's part of your wired backbone, not to the streaming box's Ethernet port.

Additional Recommendations:
• Use CAT5E (or above) Ethernet cables between Deco units to achieve gigabit speeds
• If using network switches, ensure they support gigabit ports
• If you have loop detection enabled on any switches in your network, you may need to turn it off, as there will be a short loop (1-2 seconds) when a Deco unit switches from wireless to Ethernet backhaul

Need help with the Deco app, setup, Ethernet backhaul, network switch or rolling back firmware? Router or AP mode? https://community.tp-link.com/us/home/forum/topic/699816?page=1
  0  
  0  
#2
Options
Re:BE25 Backhaul issues in Access Point Mode
Wednesday - last edited Wednesday

So my satellite deco is connected directly to the port and I was using the second port of the deco to connect to the streaming box. You apparently are saying that this will not work at all. The MoCA adapter needs to be solely for the use of the Deco and the second port is not for sharing other than to connect another Deco? If I understand that correctly, can I add a switch either before the Deco or to the second ethernet port on the Deco and accomplish wired backhaul and good Ethernet for the streambox? Thanks.

  0  
  0  
#3
Options
Re:BE25 Backhaul issues in Access Point Mode
Wednesday

  @Cymru1 

 

If you try a switch it has to be an unmannged one for the backhaul to work 

Need help with the Deco app, setup, Ethernet backhaul, network switch or rolling back firmware? Router or AP mode? https://community.tp-link.com/us/home/forum/topic/699816?page=1
  0  
  0  
#4
Options
Re:BE25 Backhaul issues in Access Point Mode
Wednesday

  @HelpFixDecoApp If that will make it work, should the placement of the unmanaged switch be, at the Moca connection or to the second cat 5 conection to the Deco? Where am I better putting it? Thank you.

  0  
  0  
#5
Options
Re:BE25 Backhaul issues in Access Point Mode
Thursday

  @Cymru1 

 

Sorry for the late reply something was bugging me about the way you had this set up and needed to think on it a bit. Why are you using the Archer BE3500?

 

The BE25 has an advantage with two 2.5Gbps ports, supporting faster wired backhaul. It also features 240MHz channel width on the 5GHz band for better capacity, making it generally more future-proof for high-speed, multi-node setups.

 

I would try removing the Archer BE3500 and changing the "Operation Mode" from Access Point to Wi-Fi Router and see if it fixes your issue.    

Need help with the Deco app, setup, Ethernet backhaul, network switch or rolling back firmware? Router or AP mode? https://community.tp-link.com/us/home/forum/topic/699816?page=1
  0  
  0  
#6
Options
Re:BE25 Backhaul issues in Access Point Mode
Yesterday

  @HelpFixDecoApp Thanks but that is not helpful since I do need the Archer. Simple question was, where to place the switch with the current setup? 

HelpFixDecoApp wrote

  @Cymru1 

 

Sorry for the late reply something was bugging me about the way you had this set up and needed to think on it a bit. Why are you using the Archer BE3500?

 

The BE25 has an advantage with two 2.5Gbps ports, supporting faster wired backhaul. It also features 240MHz channel width on the 5GHz band for better capacity, making it generally more future-proof for high-speed, multi-node setups.

 

I would try removing the Archer BE3500 and changing the "Operation Mode" from Access Point to Wi-Fi Router and see if it fixes your issue.    

 

  0  
  0  
#7
Options

Information

Helpful: 0

Views: 104

Replies: 6

Tags

Backhaul Method Access Point Mode Wi-Fi 7 Wired Backhaul
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.