Archer c5400 WiFi slower than my 4 year old entry level tp link router
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
just set up a brand new archer c5400. I have set it up as a wireless access point and it was meant to replace a tp-link WiFi router that i bought four years back. That old router was 2.4ghz only.
It's actually slower. 2.4ghz gives me a maximum of 72mbps when I am standing in front of it. Upstairs it drops to 40.
5ghz gives me about 150 upstairs and around 600 when standing in front of it. This is very disappointing.
What should I look out for? Anything really obvious?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
yes i am
- Copy Link
- Report Inappropriate Content
Because when the router is put into AP mode all of its routing functions are disabled. Some of the problems with the connection speed may be comming from the communication between the C5400 and the router its connected to. A few things to try to determine the issue
1. Make sure the "router" doesn't have wireless enabled as well. if it does disable that wireless so that only the C5400 is broadcasting
2. Connect a PC dirrectly to the C5400 via ethernet and test the connection.
3. Make sure the cable between the "router" and C5400 is a Cat5e or Cat6
4. If possible put the C5400 in as a router and test the connection
Best Regards
- Copy Link
- Report Inappropriate Content
Hi,
The main router is a draytek vigor 2925 and does not have a wireless ability at all.
When I connected a wired connection to the c5400 it reports a 1gbit/s connection and a broadband speed test gives me exactly what I would expect.
The ethernet cables in the walls are cat7, the cables from the ports to the router are cat 6. But as the wired connections work as expected it shouldn't be a cabling issue.
I will put it in router mode and just disable dhcp and use my main router as the dns and see how that performs (that's how the legacy tplink router worked).
I did reach out to tplink support for help, after an initial response I haven't heard back which is a shame as I replied with screenshots and the feedback requested (sent that on Sunday). I forwarded it over again on the offchance the email didn't arrive but still nothing unfortunately.
Thankyou for your help, it's much appreciated.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1494
Replies: 5
Voters 0
No one has voted for it yet.