Archer AXE75 V2 EasyMesh Ethernet Backhaul and 6 GHz Compatibility

Archer AXE75 V2 EasyMesh Ethernet Backhaul and 6 GHz Compatibility

Archer AXE75 V2 EasyMesh Ethernet Backhaul and 6 GHz Compatibility
Archer AXE75 V2 EasyMesh Ethernet Backhaul and 6 GHz Compatibility
a week ago
Model: Archer BE550  
Hardware Version: V2
Firmware Version:

Hello,

I currently use a TP-Link Archer BE550 V2 as my primary router and am considering purchasing two Archer AXE75 V2/V2.6 routers to extend my network.

Before purchasing, I would appreciate confirmation of the following:

  1. EasyMesh compatibility: Can the Archer AXE75 V2/V2.6 function as an EasyMesh satellite connected to an Archer BE550 V2 main router?
  2. Ethernet backhaul: Does the AXE75 V2/V2.6 support EasyMesh Ethernet backhaul, rather than just wireless backhaul? If so, can its 2.5 Gbps WAN/LAN port be used for the Ethernet backhaul connection?
  3. 6 GHz support: When operating as an EasyMesh satellite, will the AXE75 broadcast the same primary 6 GHz SSID as the BE550, allowing compatible devices to connect to 6 GHz on either router?
  4. Network synchronization: Will the AXE75 satellite also extend the BE550 V2’s separate IoT and guest wireless networks, or are these limited to the primary router?
  5. Firmware requirements: Are specific firmware versions required on either device for these features to work?

My network uses wired Ethernet throughout the house, including a 2.5 Gbps Ethernet switch, so wireless backhaul is not necessary.

I noticed TP-Link’s official Ethernet-backhaul compatibility list identifies the AXE75 V1 but does not explicitly mention V2. Could you clarify whether V2 is supported and, if possible, provide an official reference confirming compatibility?

Thank you for your assistance.

 

  0      
0
#1
Options
1 Reply
Re:Archer AXE75 V2 EasyMesh Ethernet Backhaul and 6 GHz Compatibility
Thursday - last edited Thursday

Hello  @Looking4halp ,

Thanks for contacting our community.

 

Overall, the AXE75-v2 supports Ethernet backhaul and 6GHz extension, but it doesn't currently support extending IoT or guest networks.

 

If you need to extend your IoT or guest network, we recommend the Archer BE400-v1, which supports EasyMesh synchronization for both IoT and guest networks.
We don't currently have a comprehensive compatibility list; thank you for your suggestion. We will evaluate whether to compile such a list in the future.

 

Welcome to our Community! Latest Pre-Release firmware: ▷Archer BE550 V2 Enhances EasyMesh Support with Guest/IoT/MLO Extension ▷Archer GE550/GE650 V2 Introduces AI QoS, VPN Enhancements More posts, please see: ▷Get the Ongoing Pre-release Firmware for Wi-Fi Routers Here! Contact via Messages or @Joesph-TP in your new post for urgent problems (not online 24/7). Click Recommended Solution if the post/answer helps.
  0  
0
#2
Options

Information

Helpful: 0

Views: 108

Replies: 1