HS220 flicker once when turning on
I just set up a HS220 today and everything else works fine except for one problem, my default brightness is always 100%, and when I turn on the light, the brightness will flicker like 0%->100%->75%->100%, then it is stable. The light is a LED light, adjustment of brightness just works fine after turning on. I tried to change the fade on speed but that didn't help, any idea what the problem it might be? Any suggestion is appreciated.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Carl I have the same problem with two different kinds of bulbs. They dim fine. The only issue is that when the switch is set to 100%, it blinks when it turns on. It seems like an issue with the switch?
- Copy Link
- Report Inappropriate Content
Typically that is the bulb and the dimming technology its based one. It could also be the wiring, such as a wirenut being loose. But we don't normally see that concern being caused by the switch.
- Copy Link
- Report Inappropriate Content
@Carl could you share some bulbs that would work? I'm having a hard time finding if bulbs are TRIAC.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
No that is not the case there are bulbs that do work in this classification. However, because they are 3rd party products and TP-Link does not have any affliation with these 3rd party compaines we cannot give any recommendations, less we be held liable if they don't work. This is why I last recommended to reach out directly to the bulb manufacture and ask them which of their products matches this specific specification.
- Copy Link
- Report Inappropriate Content
@Troy01 I went through multiple brands of LED bulbs and most of them were buzzing or flickering with the HS220. The best one I found (Philips EyeComfort) was not flickering or humming but flash one time when turned on at 100%. It does not flash when the "fade on speed" is set to "instant". It will still flash one time if the light is dimmed and you go up to 100%, but weird enough won't flash if you go up to 99% instead (through the app or Home Assistant).
- Copy Link
- Report Inappropriate Content
@JeePeeQC Did you find any resolution to this issue?
- Copy Link
- Report Inappropriate Content
@CarterT FYI for those who see this later, I did solve the flashing issue for me. I was using incorrect bulbs. The ones that flashed were GE Reveal LEDs (BR30). Instead I downgraded and got GE Basic Br30 LEDs which solved my issue.
- Copy Link
- Report Inappropriate Content
@Troy01 I found that if I set mine to always turn on at 98% rather than 100% that fixed the problem. Now the lights don't flash once when they turn on.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 4204
Replies: 23