How to resolve common problems when setting up the Kasa smart device (Plug/Bulb)

Released On: 2018-11-05 12:19:52Last update time: 2021-02-16 18:32:20

Our Kasa app is designed to provide an easy step-by-step process to set up your new smart device. However, there may be instances where issues come up during the installation. This guide will try and provide steps to try in order to resolve your issue.

 

Case 1 

  • Go into the “Settings > Wi-Fi” menu of your smartphone for Android or "Settings > Wi-Fi > Choose a network" for iOS, manually connect to the smart device's network. Open Kasa and select the option that you are manually connected to the smart device located on the bottom of the setup screen
  • Make certain you choose the correct smart device to connect to. The last four characters of the MAC address are also apart of the network name of the smart device.
  • Disable any VPN connection that your phone may be using during the setup.
  • Perform a factory default on the smart device and repeat the process.
  • If your Apple device is running iOS 14, check the app permission to allow local network access

 

Case 2

http://www.tp-link.com/res/upfile/faq/20151110064903.jpg

  • Make sure the smart device is not connecting back to your home Wi-Fi network. If so, connect back to the TP-Link Wi-Fi network.
  • Reinstall the Kasa app on your smartphone.

 

Case 3

  • When on the screen where you join the smart device to the network. The wireless network name you see above the wireless password box should be the one you normally connect to in order to receive internet, if not, select the link below to choose a different network name.
  • The wireless signal should be at least two bars, if it is one bar, move the device closer for setup.
  • If the router’s SSID is hidden, please choose “manually setup my Wi-Fi” to input SSID and password.

 

Case 4

  http://www.tp-link.com/res/upfile/faq/20151110064943.jpg

  • Wait 15 seconds then check LED status. If the smart device's LED indicates it is connected to the network or if the bulb blinks several times, do not select the option to start over. Sign out and back into the Kasa app and wait a few minutes to see whether the device is working.
  • Check to see if your phone is now connected back to your home Wi-Fi. If not, connect back, and go back to Kasa.
  • Verify that the wireless password being used is correct. Going into your phone Settings > Wi-Fi menu. Forget the wireless network that you are trying to connect the smart device to, and then reconnect. When the phone asks for the wireless password, use the same password that you tried in Kasa. Delete the password that exists in the box and enter the wireless password for your network again.
9
Comment

I'm trying to set up the device and just doesn't connect to the cellphone. What can I do? 

I get as far as connecting the mini plug to my home WiFi network and it fails every time. I cannot work out if I am doing something wrong even though I am following the directions.

Thanks for sharing with us this useful information

 

<a href="https://tec2solutionblog.online/">Visit 12 Best Ways To Handle Sales Pressure!</a>
 

IT DOES NOT WORK WITH WPA WiFi SECURITY. 

My Router security was set to WPA+WPA-2 and the plug would not connect to wifi. Switched the WiFi to WPA-2 only and it connected immediately. Again nothing mentioned in the "help" that it will not work with unsecured networks, 5Ghz (???) or anything other than WPA-2 secured networks. Seriously annoying.

buenas tardes compre 3 camaras tapoc200 y solo he podido conectar solo 1

como puedo añadir las otras que me faltan

gracias

Hi, I got TP-Link Kasa WiFi Power Strip 3 outlets thanks, all are working fine, however, I observe after some time one of it socket goes off automatically, I tried all the mean but this doesn't help. 

The information you share very useful. thank you for latest update.  astro ria

Hi there.

 

ive two HS-100 plugs about 18 months old and one has started to drop connectivity. The power light stays green but the WiFi light flashes amber to green slowly. I've tried to unplug, reinstall the device in the app, hold 10 seconds for reset but nothing has fixed it. Any suggestions or is it broken? Thanks in advance.

It was really helpful

 

pharmbaba: https://pharmbaba.com/

Hallo, mein Kommentar ist anscheinend weg :-(

 

ich versuche verzweifelt meine beiden HS100 WLAN Steckdosen zu aktivieren. In der App bekomme ich die Installation mit dem IPad hin, kann die Geräte auch soweit steuern. 
damit ich diese aber mit der Alexa nutzen kann benötige ich die Fernsteuerung. Diese lässt sich mit dem Fehler "TCP connect Fail" aber nicht aktivieren. 
ebenso kann ich das Firmware Update nicht installieren. 
 

kann mir jemand helfen? auch weiß mir nicht mehr weiter. Hab die Geräte jetzt schon mehrfach wieder gelöscht, die Kasa App neu installiert. 
 

vielen Dank im Voraus! 

1101112...
upload
    upload