I have a 4-way switching configuration. I have placed the HS210 at both ends of the circuit (two are currently installed). The two HS210s and the standard 4 way all work when you flip them. They all turn on and off the lights. The problem is that in the app if I turn the lights on with the dummy/4 way switch the lights turn on but the app doesn't show that the lights are on and then is out of sync if I use another switch. Conversely if I use the app to turn the lights on, the lights turn on and the app shows the lights are on. I click the app again and the app shows the lights are off but the lights are still on, click one more time and the app shows lights on but the lights are off, click the app again and the app shows lights are off and lights stay off. Wondering if this is some sort of firmware issue, a fault 4 way switch or something else going on in my wiring setup. Its a pretty simple setup in my garage and I've confirmed all neutrals are connected and the travelers and common wiring is all correct. Thoughts on why the app status/light status aren't correct?