Deco web interface login
This article will show the various menus and data that the Deco web UI can provide. One point I would like to stress is that the Deco UI is not the same as a router UI. Do not expect to be able to the same configurations in the Deco that you can do in the Deco app.
The Deco UI offers a general status of your network, as well as the ability to update the firmware manually which the app can not do. Other than that, you will still be using the Deco app for any configuration needs.
Login Page (Default IP is http://tplinkdeco.net or http://192.168.68.1)
The login password is the same as the password of the Deco APP login.
Network Map (first page seen when logging in) – Shows information about your Deco, Wi-Fi network, and CPU performance
Network Map > Internet – shows your WAN connection type, and the public IP your Deco has
Network Map > Clients – you can see all connected clients from all Deco units or single out a specific Deco, the speeds the devices are using, and how the clients are connected
Advanced > Status – you can see the networking information for the WAN, LAN, and the wireless SSID
Advanced > System > Firmware Upgrade – you can manually upload the firmware, or you can tell the Deco to update to the latest firmware over the internet
Advanced > System > System Log – you can see various types of logs from network connection to critical system errors and export them to your computer
Advanced > System > Time Settings - you can configure the region the Deco is located so the system can sync the appropriate time
Advanced > System > Reboot – you can reboot a specific Deco unit, or you can reboot the entire network
Advanced > System > System parameters
Forgot login password
Is it possible to change my email address for my account?
Al momento de dar de alta el Deco no coloque el nombre de la red como una contraseña, hay forma de colocar nombre y contraseña de la red?
Hello, I'm using 34 Decos across 4 different locations. At one location, I'm experiencing an issue with the web interface. The main Deco there is an X50 Outdoor (firmware version 1.2.5 Build 20231121 Rel. 68541). When I go to the Deco's web page (192.168.1.175 in my case), I'm automatically redirected to index.html#networkMap, but then the Deco 'freezes' immediately: It continues to work, but I can't proceed beyond this screen. Clicking 'Advanced' also doesn't work (as if the screen is blocked until the first page is loaded). Is there a way to manually enter another link to access the 'advanced' menu? How can I resolve this? Simply restarting doesn't work; the problem remains the same (freezing on the main page).
