Tapo P110 - Mini Smart Wi-Fi Plug

with Energy Monitoring, Smart Charge Guard, and Added Power Protection

 

Energy Tracking with Bill Estimates and Data Exports - Take Advantage of Tapo’s Enhanced Energy Monitoring Features To Track Your Device Usage. Learn How to use the energy monitoring feature in our announcement of the feature: Introducing Tapo Energy Monitoring 2.0

 

Improved Power Safety with Power Protection Feature - Your connected device will automatically shut off when the power usage exceeds the set threshold, protecting your household's safety.

 

Prevent Overcharging and Reduce Expenses with Smart Charge Guard - Automatically cuts power to a device once fully charged, preventing overcharging and reducing energy expenses.

 

Amazon FFS (Frustration-Free Setup): - Alexa’s Frustration-Free Setup allows you to configure your smart plug just by plugging them in. You can power on your Tapo L531E right out of the box and start controlling it with Alexa a few seconds later.

 

-----

 

Introducing New Smart Charge Guard for Charging Connected Devices

The New Smart Charge Feature allows you to turn off a device's power when its consumption drops below a certain level, protecting your device’s battery from overcharging and reducing your potential energy use.

This is possible because as your device charges, it will consume different amounts of power – this is also why you may that find the first 50% of your phone battery charges significantly faster than the second half.

While the values for each device will be different, below you can find the recommended settings based on our internal laboratory testing:

• Mobile Phone / Tablet: 30 Minutes at 2W
• Laptop Computer: 60 Minutes at 2W
• Watch/Headphones: 50 Minutes at 1W

 

Found a Device Type and Ideal Setting? Let Us Know in the Comments Below!

 

Note: Smaller Accessories or Devices are not recommended due to their limited power consumption and lack of an obvious power drop while charging – resulting in your device not being fully charged.

 

Tip: If you are having difficulty with your device not charging to full with the Smart Charge Guard feature, try adjusting the custom power settings to a higher value and for a longer period of time.

 

-----

 

Increased Power Protections for Connected Devices

The New Power Protection feature cuts off the power when the power consumption of the connected device exceeds a set threshold. This feature can be done to protect your devices from overloading the plug or circuit or as an added precaution to prevent runaway devices.

For Example, you can use Power Protection to turn off a Space Heater whenever the Power Exceeds 1.5kW.

 

What is the Difference Between the Smart Charge Guard and the Power Protection Features?

Smart Charge Guard can cut off the power when the power consumption of the back-end equipment is lower than a certain value for a period of time, which is applied to protect the battery and save power.

Power Protection can cut off the power supply when the power consumption of the back-end equipment is higher than a certain value, which is applied to prevent overload and ensure the safety of power consumption.

 

----

 

Technical Details:

• Power Consumption (Relay ON/OFF): 1.64W / 0.64W
• Rated: 100-120V~ 50/60Hz
• Maximum Load: 15A, 1800W (General Use / Resistive Load), 1/6HP Motor
• Operating Conditions: 0 ºC - 40 ºC (32°F–104°F); 10% - 90% Relative Humidity, Non-Condensing

 

Tapo P110 Product Overview Page

or

Buy the Tapo P110 on Amazon Today!

 

Related Articles and FAQs:

Introducing Tapo Energy Monitoring 2.0

How Much Is Too Much? Smart Plug Capacities