Cant connect via VLC

Cant connect via VLC

Cant connect via VLC
Cant connect via VLC
2 weeks ago - last edited a week ago
Model: Tapo C500  
Hardware Version: V1
Firmware Version: 1.1.3

I try to connect with my device but it keeps failing and i dont know why.

I tried everything i could find cause nothing worked. I've connected before with the C310 version but can't connect to it anymore.

 

 

http://router WAN(public) IP address:554/onvif/device_service
http://router WAN(public) IP address:2020/onvif/device_service
http:// camera IP Address:554/stream1
http://camera IP Address:554/stream1
http:// camera IP Address:554/stream2
http://camera IP Address:554/stream2
http:// camera IP Address:2020/stream1
http://camera IP Address:2020/stream1
http:// camera IP Address:2020/stream2
http://camera IP Address:2020/stream2
rtsp:// camera IP Address:554/stream1
rtsp://camera IP Address:554/stream1
rtsp:// camera IP Address:554/stream2
rtsp://camera IP Address:554/stream2
rtsp:// camera IP Address:2020/stream1
rtsp://camera IP Address:2020/stream1
rtsp:// camera IP Address:2020/stream2
rtsp://camera IP Address:2020/stream2
rtsp://username:password@ip_address:554/stream1

rtsp://username:password@ip_address:554/stream2
rtsp://username:password@ip_address:2020/stream1

rtsp://username:password@ip_address:2020/stream2

  0      
  0      
#1
Options
1 Reply
Re:Cant connect via VLC
a week ago

  @Tigertjehu 

Hi,
If you fail to stream the Tapo camera via the RTSP/ONVIF protocol on the VLC, you may refer to the article below for troubleshooting.
What can I do if fail to stream the Tapo camera via the RTSP/ONVIF protocol?

If the problem remains, please help confirm the test results of the above steps.

 

Best Regards

  1  
  1  
#2
Options

Information

Helpful: 0

Views: 84

Replies: 1

Related Articles