После прошивки модем видит,но не подключается

Эта ветка закрыта для дальнейших ответов. Вы можете создать новую тему, чтобы поделиться своими идеями или задать вопросы.

После прошивки модем видит,но не подключается

Эта ветка закрыта для дальнейших ответов. Вы можете создать новую тему, чтобы поделиться своими идеями или задать вопросы.
После прошивки модем видит,но не подключается
После прошивки модем видит,но не подключается
2014-12-21 00:43:06
Аппаратная версия устройства: v1
Версия прошивки: OpenWRT R40862
Ваша страна: Россия
Название провайдера: Билайн
Скорость по тарифу: 3g
Подключение с ПК по wifi или по кабелю?: по wifi или по кабелю
Если наблюдаются разрывы, то как часто?: нет
Наблюдается проблема, когда нет нагрузки?: нет
Что пишется в статусе Вашего подключения при проблеме?: нет интернета
Наблюдается ли проблема при подключении без роутера?: нет
Ваша операционная система: Windows 7
Антивирусные программы и фаерволы: microsoft Логи оборудования: Tue Dec 2 20:38:32 2014 kern.info kernel: [ 11.010000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Tue Dec 2 20:38:32 2014 kern.info kernel: [ 11.070000] PPP generic driver version 2.4.2
Tue Dec 2 20:38:32 2014 kern.info kernel: [ 11.070000] NET: Registered protocol family 24
Tue Dec 2 20:38:32 2014 kern.info kernel: [ 11.080000] usbcore: registered new interface driver sierra
Tue Dec 2 20:38:32 2014 kern.info kernel: [ 11.080000] usbserial: USB Serial support registered for Sierra USB modem
Tue Dec 2 20:38:32 2014 kern.info kernel: [ 11.130000] usbcore: registered new interface driver option
Tue Dec 2 20:38:32 2014 kern.info kernel: [ 11.130000] usbserial: USB Serial support registered for GSM modem (1-port)
Tue Dec 2 20:38:32 2014 kern.debug kernel: [ 11.170000] ath: EEPROM regdomain: 0x0
Tue Dec 2 20:38:32 2014 kern.debug kernel: [ 11.170000] ath: EEPROM indicates default country code should be used
Tue Dec 2 20:38:32 2014 kern.debug kernel: [ 11.170000] ath: doing EEPROM country->regdmn map search
Tue Dec 2 20:38:32 2014 kern.debug kernel: [ 11.170000] ath: country maps to regdmn code: 0x3a
Tue Dec 2 20:38:32 2014 kern.debug kernel: [ 11.170000] ath: Country alpha2 being used: US
Tue Dec 2 20:38:32 2014 kern.debug kernel: [ 11.170000] ath: Regpair used: 0x3a
Tue Dec 2 20:38:32 2014 kern.debug kernel: [ 11.180000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Tue Dec 2 20:38:32 2014 kern.info kernel: [ 11.190000] cfg80211: Calling CRDA for country: US
Tue Dec 2 20:38:32 2014 kern.info kernel: [ 11.190000] cfg80211: Regulatory domain changed to country: US
Tue Dec 2 20:38:32 2014 kern.info kernel: [ 11.200000] cfg80211: DFS Master region: FCC
Tue Dec 2 20:38:32 2014 kern.info kernel: [ 11.200000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Tue Dec 2 20:38:32 2014 kern.info kernel: [ 11.210000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
Tue Dec 2 20:38:32 2014 kern.info kernel: [ 11.220000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
Tue Dec 2 20:38:32 2014 kern.info kernel: [ 11.230000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
Tue Dec 2 20:38:32 2014 kern.info kernel: [ 11.240000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
Tue Dec 2 20:38:32 2014 kern.info kernel: [ 11.240000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Tue Dec 2 20:38:32 2014 kern.info kernel: [ 11.250000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
Tue Dec 2 20:38:32 2014 user.emerg syslog: Error: Failed to connect to ubus
Tue Dec 2 20:38:36 2014 authpriv.info dropbear[769]: Not backgrounding
Tue Dec 2 20:38:37 2014 user.notice usb-modeswitch: Remove Early Modeswitch
Tue Dec 2 20:38:37 2014 user.emerg syslog: setting up led USB
Tue Dec 2 20:38:37 2014 user.emerg syslog: setting up led WLAN
Tue Dec 2 20:38:37 2014 user.emerg syslog: setting up led LAN
Tue Dec 2 20:38:38 2014 user.notice ROOter Initialize: Initializing Rooter
Tue Dec 2 20:38:38 2014 user.emerg syslog: Usage: uci [<options>] <command> [<arguments>]
Tue Dec 2 20:38:38 2014 user.emerg syslog:
Tue Dec 2 20:38:38 2014 user.emerg syslog: Commands:
Tue Dec 2 20:38:38 2014 user.emerg syslog: batch
Tue Dec 2 20:38:38 2014 user.emerg syslog: export [<config>]
Tue Dec 2 20:38:38 2014 user.emerg syslog: import [<config>]
Tue Dec 2 20:38:38 2014 user.emerg syslog: changes [<config>]
Tue Dec 2 20:38:38 2014 user.emerg syslog: commit [<config>]
Tue Dec 2 20:38:38 2014 user.emerg syslog: add <config> <section-type>
Tue Dec 2 20:38:38 2014 user.emerg syslog: add_list <config>.<section>.<option>=<string>
Tue Dec 2 20:38:38 2014 user.emerg syslog: del_list <config>.<section>.<option>=<string>
Tue Dec 2 20:38:38 2014 user.emerg syslog: uci: Entry not found
Tue Dec 2 20:38:38 2014 user.emerg syslog: ifconfig: eth1: error fetching interface information: Device not found
Tue Dec 2 20:38:39 2014 user.emerg syslog: uci: Entry not found
Tue Dec 2 20:38:39 2014 user.emerg syslog: uci: Entry not found
Tue Dec 2 20:38:39 2014 kern.info kernel: [ 21.110000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Tue Dec 2 20:38:39 2014 kern.info kernel: [ 21.120000] device eth0 entered promiscuous mode
Tue Dec 2 20:38:39 2014 kern.info kernel: [ 21.120000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Tue Dec 2 20:38:39 2014 daemon.notice netifd: Interface 'lan' is enabled
Tue Dec 2 20:38:39 2014 daemon.notice netifd: Interface 'lan' is setting up now
Tue Dec 2 20:38:39 2014 user.emerg syslog: Warning: Unable to locate ipset utility, disabling ipset support
Tue Dec 2 20:38:39 2014 daemon.notice netifd: Interface 'lan' is now up
Tue Dec 2 20:38:39 2014 daemon.notice netifd: Interface 'loopback' is enabled
Tue Dec 2 20:38:39 2014 daemon.notice netifd: Network device 'lo' link is up
Tue Dec 2 20:38:39 2014 daemon.notice netifd: Interface 'loopback' has link connectivity
Tue Dec 2 20:38:39 2014 daemon.notice netifd: Interface 'loopback' is setting up now
Tue Dec 2 20:38:39 2014 daemon.notice netifd: Interface 'loopback' is now up
Tue Dec 2 20:38:39 2014 daemon.warn odhcpd[734]: Failed to send to ff02::1%br-lan (Cannot assign requested address)
Tue Dec 2 20:38:39 2014 daemon.warn odhcpd[734]: Failed to send to ff02::1%br-lan (Cannot assign requested address)
Tue Dec 2 20:38:39 2014 user.emerg syslog: Warning: Section @zone[1] (wan) cannot resolve device of network 'wan'
Tue Dec 2 20:38:39 2014 user.emerg syslog: Warning: Section @zone[1] (wan) cannot resolve device of network 'wan1'
Tue Dec 2 20:38:39 2014 user.emerg syslog: Warning: Section @zone[1] (wan) cannot resolve device of network 'wan2'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Flushing IPv4 filter table
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Flushing IPv4 nat table
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Flushing IPv4 mangle table
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Flushing IPv4 raw table
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Flushing IPv6 filter table
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Flushing IPv6 mangle table
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Flushing IPv6 raw table
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Flushing conntrack table ...
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Populating IPv4 filter table
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Zone 'lan'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Zone 'wan'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Rule 'Allow-DHCP-Renew'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Rule 'Allow-Ping'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Forward 'lan' -> 'wan'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Populating IPv4 nat table
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Zone 'lan'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Zone 'wan'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Populating IPv4 mangle table
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Zone 'lan'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Zone 'wan'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Populating IPv4 raw table
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Zone 'lan'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Zone 'wan'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Populating IPv6 filter table
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Zone 'lan'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Zone 'wan'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Rule 'Allow-DHCPv6'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Rule 'Allow-ICMPv6-Input'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Rule 'Allow-ICMPv6-Forward'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Forward 'lan' -> 'wan'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Populating IPv6 mangle table
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Zone 'lan'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Zone 'wan'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Populating IPv6 raw table
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Zone 'lan'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Zone 'wan'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Set tcp_ecn to off
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Set tcp_syncookies to on
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Set tcp_window_scaling to on
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Running script '/etc/firewall.user'
Tue Dec 2 20:38:40 2014 kern.info kernel: [ 22.020000] usb 1-1: USB disconnect, device number 2
Tue Dec 2 20:38:41 2014 kern.info kernel: [ 22.620000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Tue Dec 2 20:38:41 2014 kern.info kernel: [ 22.620000] device wlan0 entered promiscuous mode
Tue Dec 2 20:38:41 2014 kern.info kernel: [ 22.640000] br-lan: port 2(wlan0) entered forwarding state
Tue Dec 2 20:38:41 2014 kern.info kernel: [ 22.640000] br-lan: port 2(wlan0) entered forwarding state
Tue Dec 2 20:38:41 2014 kern.info kernel: [ 22.650000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Tue Dec 2 20:38:41 2014 daemon.notice netifd: Bridge 'br-lan' link is up
Tue Dec 2 20:38:41 2014 daemon.notice netifd: Interface 'lan' has link connectivity
Tue Dec 2 20:38:41 2014 kern.info kernel: [ 22.660000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Tue Dec 2 20:38:41 2014 daemon.notice netifd: Network device 'wlan0' link is up
Tue Dec 2 20:38:42 2014 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Tue Dec 2 20:38:42 2014 user.emerg syslog: - init complete -
Tue Dec 2 20:38:43 2014 kern.info kernel: [ 24.640000] br-lan: port 2(wlan0) entered forwarding state
Tue Dec 2 20:38:48 2014 daemon.info dnsmasq[1043]: started, version 2.71 cachesize 150
Tue Dec 2 20:38:48 2014 daemon.info dnsmasq[1043]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC
Tue Dec 2 20:38:48 2014 daemon.info dnsmasq-dhcp[1043]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Tue Dec 2 20:38:48 2014 daemon.info dnsmasq[1043]: using local addresses only for domain lan
Tue Dec 2 20:38:48 2014 daemon.warn dnsmasq[1043]: no servers found in /tmp/resolv.conf.auto, will retry
Tue Dec 2 20:38:48 2014 daemon.info dnsmasq[1043]: read /etc/hosts - 1 addresses
Tue Dec 2 20:38:48 2014 daemon.info dnsmasq-dhcp[1043]: read /etc/ethers - 0 addresses
Tue Dec 2 20:38:49 2014 kern.info kernel: [ 31.320000] usb 1-1: new high-speed USB device number 3 using ehci-platform
Tue Dec 2 20:38:53 2014 user.notice usb-modeswitch: Add : 1-1: Manufacturer=Spreadtrum Product=HSPA+_USB_Modem Serial=? 1bbb 022c
Tue Dec 2 20:38:53 2014 user.notice usb-modeswitch: *****************************************************************
Tue Dec 2 20:38:53 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:38:53 2014 user.notice usb-modeswitch: * Start of Modem Detection and Connection Information
Tue Dec 2 20:38:53 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:38:53 2014 user.notice usb-modeswitch: * Product=HSPA+_USB_Modem 1bbb 022c
Tue Dec 2 20:38:53 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:38:53 2014 user.notice usb-modeswitch: *****************************************************************
Tue Dec 2 20:38:53 2014 user.notice usb-modeswitch: *****************************************************************
Tue Dec 2 20:38:53 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:38:53 2014 user.notice usb-modeswitch: * This device does not have a switch data file
Tue Dec 2 20:38:53 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:38:53 2014 user.notice usb-modeswitch: * Product=HSPA+_USB_Modem 1bbb 022c
Tue Dec 2 20:38:53 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:38:53 2014 user.notice usb-modeswitch: *****************************************************************
Tue Dec 2 20:39:03 2014 user.notice usb-modeswitch: *****************************************************************
Tue Dec 2 20:39:03 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:39:03 2014 user.notice usb-modeswitch: * Switched to : 1bbb:022c
Tue Dec 2 20:39:03 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:39:03 2014 user.notice usb-modeswitch: *****************************************************************
Tue Dec 2 20:39:03 2014 user.notice Log Print : Driver Name : 1
Tue Dec 2 20:39:03 2014 user.notice Log Print : Driver Name : 2
Tue Dec 2 20:39:03 2014 user.notice Log Print : Driver Name : 3
Tue Dec 2 20:39:03 2014 user.notice Log Print : Driver Name : 4
Tue Dec 2 20:39:03 2014 user.notice usb-modeswitch: *****************************************************************
Tue Dec 2 20:39:03 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:39:03 2014 user.notice usb-modeswitch: * ProtoFind returns : 0
Tue Dec 2 20:39:03 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:39:03 2014 user.notice usb-modeswitch: *****************************************************************
Tue Dec 2 20:39:04 2014 user.notice usb-modeswitch: Ignoring Linux Hub
Tue Dec 2 20:39:13 2014 user.notice usb-modeswitch: Add : 1-1: Manufacturer=Spreadtrum Product=HSPA+_USB_Modem Serial=? 1bbb 022c
Tue Dec 2 20:39:13 2014 user.notice usb-modeswitch: *****************************************************************
Tue Dec 2 20:39:13 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:39:13 2014 user.notice usb-modeswitch: * Start of Modem Detection and Connection Information
Tue Dec 2 20:39:13 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:39:13 2014 user.notice usb-modeswitch: * Product=HSPA+_USB_Modem 1bbb 022c
Tue Dec 2 20:39:13 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:39:13 2014 user.notice usb-modeswitch: *****************************************************************
Tue Dec 2 20:39:13 2014 user.notice usb-modeswitch: *****************************************************************
Tue Dec 2 20:39:13 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:39:13 2014 user.notice usb-modeswitch: * This device does not have a switch data file
Tue Dec 2 20:39:13 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:39:13 2014 user.notice usb-modeswitch: * Product=HSPA+_USB_Modem 1bbb 022c
Tue Dec 2 20:39:13 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:39:13 2014 user.notice usb-modeswitch: *****************************************************************
Tue Dec 2 20:39:23 2014 user.notice usb-modeswitch: *****************************************************************
Tue Dec 2 20:39:23 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:39:23 2014 user.notice usb-modeswitch: * Switched to : 1bbb:022c
Tue Dec 2 20:39:23 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:39:23 2014 user.notice usb-modeswitch: *****************************************************************
Tue Dec 2 20:39:23 2014 user.notice Log Print : Driver Name : 1
Tue Dec 2 20:39:23 2014 user.notice Log Print : Driver Name : 2
Tue Dec 2 20:39:24 2014 user.notice Log Print : Driver Name : 3
Tue Dec 2 20:39:24 2014 user.notice Log Print : Driver Name : 4
Tue Dec 2 20:39:24 2014 user.notice usb-modeswitch: *****************************************************************
Tue Dec 2 20:39:24 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:39:24 2014 user.notice usb-modeswitch: * ProtoFind returns : 0
Tue Dec 2 20:39:24 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:39:24 2014 user.notice usb-modeswitch: *****************************************************************
Tue Dec 2 20:39:52 2014 daemon.info hostapd: wlan0: STA 9c:d6:43:32:ac:9b IEEE 802.11: authenticated
Tue Dec 2 20:39:52 2014 daemon.info hostapd: wlan0: STA 9c:d6:43:32:ac:9b IEEE 802.11: associated (aid 1)
Tue Dec 2 20:39:54 2014 daemon.info dnsmasq[1043]: read /etc/hosts - 1 addresses
Tue Dec 2 20:39:54 2014 daemon.info dnsmasq[1043]: read /tmp/hosts/dhcp - 0 addresses
Tue Dec 2 20:39:54 2014 daemon.info dnsmasq[1043]: read /tmp/hosts/odhcpd - 1 addresses
Tue Dec 2 20:39:54 2014 daemon.info dnsmasq-dhcp[1043]: read /etc/ethers - 0 addresses
Tue Dec 2 20:39:59 2014 daemon.info dnsmasq-dhcp[1043]: BOOTP(br-lan) 00:ab:00:00:00:00 no address configured
Tue Dec 2 20:40:21 2014 kern.info kernel: [ 122.760000] eth0: link up (100Mbps/Full duplex)
Tue Dec 2 20:40:21 2014 kern.info kernel: [ 122.760000] br-lan: port 1(eth0) entered forwarding state
Tue Dec 2 20:40:21 2014 kern.info kernel: [ 122.770000] br-lan: port 1(eth0) entered forwarding state
Tue Dec 2 20:40:21 2014 kern.info kernel: [ 122.770000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Tue Dec 2 20:40:21 2014 daemon.notice netifd: Network device 'eth0' link is up
Tue Dec 2 20:40:23 2014 daemon.info dnsmasq[1043]: read /etc/hosts - 1 addresses
Tue Dec 2 20:40:23 2014 daemon.info dnsmasq[1043]: read /tmp/hosts/dhcp - 0 addresses
Tue Dec 2 20:40:23 2014 daemon.info dnsmasq[1043]: read /tmp/hosts/odhcpd - 2 addresses
Tue Dec 2 20:40:23 2014 daemon.info dnsmasq-dhcp[1043]: read /etc/ethers - 0 addresses
Tue Dec 2 20:40:23 2014 kern.info kernel: [ 124.770000] br-lan: port 1(eth0) entered forwarding state
Tue Dec 2 20:40:25 2014 daemon.info dnsmasq-dhcp[1043]: DHCPREQUEST(br-lan) 192.168.1.196 00:22:15:ae:20:26
Tue Dec 2 20:40:25 2014 daemon.info dnsmasq-dhcp[1043]: DHCPACK(br-lan) 192.168.1.196 00:22:15:ae:20:26 Ecliipse-PC
Tue Dec 2 20:40:25 2014 daemon.info dnsmasq-dhcp[1043]: DHCPREQUEST(br-lan) 192.168.1.196 00:22:15:ae:20:26
Tue Dec 2 20:40:25 2014 daemon.info dnsmasq-dhcp[1043]: DHCPACK(br-lan) 192.168.1.196 00:22:15:ae:20:26 Ecliipse-PC
Tue Dec 2 20:40:30 2014 daemon.info dnsmasq-dhcp[1043]: DHCPINFORM(br-lan) 192.168.1.196 00:22:15:ae:20:26
Tue Dec 2 20:40:30 2014 daemon.info dnsmasq-dhcp[1043]: DHCPACK(br-lan) 192.168.1.196 00:22:15:ae:20:26 Ecliipse-PC
Tue Dec 2 20:41:53 2014 daemon.info dnsmasq-dhcp[1043]: DHCPINFORM(br-lan) 192.168.1.196 00:22:15:ae:20:26
Tue Dec 2 20:41:53 2014 daemon.info dnsmasq-dhcp[1043]: DHCPACK(br-lan) 192.168.1.196 00:22:15:ae:20:26 Ecliipse-PC
Tue Dec 2 20:41:59 2014 kern.info kernel: [ 221.290000] device wlan0 left promiscuous mode
Tue Dec 2 20:41:59 2014 kern.info kernel: [ 221.290000] br-lan: port 2(wlan0) entered disabled state
Tue Dec 2 20:41:59 2014 daemon.notice netifd: Network device 'wlan0' link is down
Tue Dec 2 20:42:01 2014 kern.info kernel: [ 222.900000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Tue Dec 2 20:42:01 2014 kern.info kernel: [ 223.240000] device wlan0 entered promiscuous mode
здравствуйте! приобрел модем алкатель X602D, после прошивки на OpenWRT R40862 иногда определяется (при включении в сеть,иногда) и отображается уровень сигнала, индикатор на роутере при этом горит.
но вот к инету подключиться не могу. пробовал прописать настройки в меню модем инфо-не помогло ,метод научного тыка тоже не помог,нервы на исходе.
  0      
  0      
#1
Опции
1 Ответить
Re:
2014-12-21 05:39:47
В списке поддерживаемых модемов он отсутствует.Только альтернативная прошивка роутера в помощь.
  0  
  0  
#1
Опции