Настройка на базе OpenWRT Of Modems and Men

Эта ветка закрыта для дальнейших ответов. Вы можете создать новую тему, чтобы поделиться своими идеями или задать вопросы.
123...

Настройка на базе OpenWRT Of Modems and Men

Эта ветка закрыта для дальнейших ответов. Вы можете создать новую тему, чтобы поделиться своими идеями или задать вопросы.
Настройка на базе OpenWRT Of Modems and Men
Настройка на базе OpenWRT Of Modems and Men
2013-11-29 16:13:09
Внимание! Прошивки вы используете на свой страх и риск. Имейте ввиду, что при неудачной прошивке устройство может выйти из строя!


Здравствуйте.
В этой теме мы расскажем вам, как можно добиться совместимости данного маршрутизатора с USB-модемами.

Список актуальных модемов на данный момент не доступен, данный материал готовиться


Установка прошивки.

Скачиваем актуальную версию прошивки OpenWRT Of Modems and Men
Мы используем версию от 2013-11-23 Red [hide]Ссылка для скачивания для TP-Link MR3420v1[/hide] [hide]Ссылка для скачивания для TP-Link MR3420v2[/hide]
После этого устанавливаем прошивку на маршрутизатор.

Процесс перепрошивки роутера и рекомендации

Важно: после перепрошивки адрес роутера изменится на http://192.168.1.1/
Имя пользователя: root
Пароль отсутствует.

В данной прошивке больше ничего настраивать не нужно, просто вставляете свой модем, и он должен заработать если модем не заработал то значит он не поддерживается.
  0      
  0      
#1
Опции
284 Ответить
Re: Настройка на базе OpenWRT Of Modems and Men
2013-12-02 17:21:25
мегафон м150-1 завелся без проблем на v1
upd: на утро комп без инета, хотя в статусе роутера онлайн, так как и должно быть....будем копать дальше
  0  
  0  
#1
Опции
Re: Настройка на базе OpenWRT Of Modems and Men
2013-12-18 10:45:30
Transmission есть в это прошивке?
  0  
  0  
#1
Опции
Re: Настройка на базе OpenWRT Of Modems and Men
2013-12-20 05:06:41
Чего то huawei e3131 работает так же нестабильно как и на родной прошивке :( Постоянно пропадает инет соединение. Уровень сигнала 51%.
  0  
  0  
#1
Опции
Re: Настройка на базе OpenWRT Of Modems and Men
2013-12-22 13:51:00
на сайте ofmodemsandmen в поддержке только LTE модемы.
С 3G evdo модемами (Украина) дружит?
  0  
  0  
#1
Опции
Re: Настройка на базе OpenWRT Of Modems and Men
2013-12-24 13:24:06
[quote="webby"]на сайте ofmodemsandmen в поддержке только LTE модемы.
С 3G evdo модемами (Украина) дружит?[/quote]
Как я понимаю, да обычные модемы поддерживаются:
Regular USB Modems

Но вот стандарты не указаны (EVDO или UMTS)
  0  
  0  
#1
Опции
Re: Настройка на базе OpenWRT Of Modems and Men
2013-12-25 07:41:01
[quote="webby"] С 3G evdo модемами (Украина) дружит?[/quote]если модель вашего модема есть в списке,то должен работать




а также - Other makes and models may also be supported but have not been reported to the project.
  0  
  0  
#1
Опции
Re: Настройка на базе OpenWRT Of Modems and Men
2013-12-26 09:16:10
Мегафон М150-1 (Е3276) работает без плясок с бубном на TP-LINK 3420 строй ревизии 1. Установил на TP-LINK 3420 v1. openWRT "желтой" прошивкой, не "красной", которую советуют в теме. После чего настроил, вайфай, локалку, настройки для модема установил, и воткнул модем в порт, не переводил модем ни в какие режимы, все как есть. Модем подключился и без разрыва работал примерно час, пока я сам не отключил его.
  0  
  0  
#1
Опции
Re: Настройка на базе OpenWRT Of Modems and Men
2014-01-07 21:55:38
Доброго времени суток. 3 дня уже лажу по форумам и никак не могу подружить роутер 3420v2.1 с модемом Pantech UMW190 на прошивке "red" для V2, испытывал и "yellow", результат тот же. Потому уже решил написать сюда. Порт использую ttyACM0(нашел на форумах). Прошивка модема W0190VWB222F.205. Провайдер Интертелеком(Украина), настройки все прописаны в роутере. Но добится соединения от модема не могу. Sat Dec 14 20:18:03 2013 kern.info kernel: [ 0.530000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 0.540000] TCP: Hash tables configured (established 512 bind 512)
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 0.540000] TCP: reno registered
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 0.540000] UDP hash table entries: 256 (order: 0, 4096 bytes)
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 0.550000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 0.560000] NET: Registered protocol family 1
Sat Dec 14 20:18:03 2013 kern.debug kernel: [ 0.560000] PCI: CLS 0 bytes, default 32
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 0.580000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 0.580000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 0.590000] msgmni has been set to 56
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 0.600000] io scheduler noop registered
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 0.600000] io scheduler deadline registered (default)
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 0.610000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 0.630000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 0.640000] console [ttyS0] enabled, bootconsole disabled
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 0.650000] ath79-spi ath79-spi: master is unqueued, this is deprecated
Sat Dec 14 20:18:03 2013 kern.warn kernel: [ 0.660000] m25p80 spi0.0: found s25sl032p, expected m25p80
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 0.670000] m25p80 spi0.0: s25sl032p (4096 Kbytes)
Sat Dec 14 20:18:03 2013 kern.notice kernel: [ 0.670000] 5 tp-link partitions found on MTD device spi0.0
Sat Dec 14 20:18:03 2013 kern.notice kernel: [ 0.680000] Creating 5 MTD partitions on "spi0.0":
Sat Dec 14 20:18:03 2013 kern.notice kernel: [ 0.680000] 0x000000000000-0x000000020000 : "u-boot"
Sat Dec 14 20:18:03 2013 kern.notice kernel: [ 0.690000] 0x000000020000-0x00000011ac3c : "kernel"
Sat Dec 14 20:18:03 2013 kern.warn kernel: [ 0.700000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
Sat Dec 14 20:18:03 2013 kern.notice kernel: [ 0.710000] 0x00000011ac3c-0x0000003f0000 : "rootfs"
Sat Dec 14 20:18:03 2013 kern.warn kernel: [ 0.720000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
Sat Dec 14 20:18:03 2013 kern.notice kernel: [ 0.730000] mtd: device 2 (rootfs) set to be root filesystem
Sat Dec 14 20:18:03 2013 kern.notice kernel: [ 0.740000] 1 squashfs-split partitions found on MTD device rootfs
Sat Dec 14 20:18:03 2013 kern.notice kernel: [ 0.740000] 0x0000003a0000-0x0000003f0000 : "rootfs_data"
Sat Dec 14 20:18:03 2013 kern.notice kernel: [ 0.750000] 0x0000003f0000-0x000000400000 : "art"
Sat Dec 14 20:18:03 2013 kern.notice kernel: [ 0.760000] 0x000000020000-0x0000003f0000 : "firmware"
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 0.780000] libphy: ag71xx_mdio: probed
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 1.340000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:00 [uid=004dd042, driver=Generic PHY]
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 1.350000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 1.900000] eth%d: Found an AR934X built-in switch
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 2.940000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 2.940000] TCP: cubic registered
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 2.950000] NET: Registered protocol family 17
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 2.950000] 8021q: 802.1Q VLAN Support v1.8
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 2.960000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 2.970000] Freeing unused kernel memory: 260K (8031f000 - 80360000)
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 6.100000] usbcore: registered new interface driver usbfs
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 6.100000] usbcore: registered new interface driver hub
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 6.110000] usbcore: registered new device driver usb
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 6.120000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 6.130000] ehci-platform: EHCI generic platform driver
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 6.130000] ehci-platform ehci-platform: EHCI Host Controller
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 6.140000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 6.150000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 6.180000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 6.180000] hub 1-0:1.0: USB hub found
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 6.190000] hub 1-0:1.0: 1 port detected
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 6.200000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 6.210000] uhci_hcd: USB Universal Host Controller Interface driver
Sat Dec 14 20:18:03 2013 kern.notice kernel: [ 8.570000] jffs2: notice: (321) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 25 of xref (0 dead, 9 orphan) found.
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 10.910000] NET: Registered protocol family 10
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 10.930000] nf_conntrack version 0.5.0 (453 buckets, 1812 max)
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 10.940000] ip6_tables: (C) 2000-2006 Netfilter Core Team
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 10.970000] u32 classifier
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 10.980000] input device check on
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 10.980000] Actions configured
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 10.990000] Mirror/redirect action on
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.000000] usbcore: registered new interface driver cdc_wdm
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.010000] Loading modules backported from Linux version master-2013-11-05-0-gafa3093
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.010000] Backport generated by backports.git backports-20130802-0-gdb67a3f
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.020000] ip_tables: (C) 2000-2006 Netfilter Core Team
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.070000] usbcore: registered new interface driver usbserial
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.080000] usbcore: registered new interface driver usbserial_generic
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.080000] usbserial: USB Serial support registered for generic
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.130000] xt_time: kernel timezone is -0000
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.140000] usbcore: registered new interface driver cdc_ether
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.150000] usbcore: registered new interface driver cdc_ncm
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.170000] cfg80211: Calling CRDA to update world regulatory domain
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.180000] cfg80211: World regulatory domain updated:
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.190000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.190000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.200000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.210000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.220000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.230000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.230000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.290000] PPP generic driver version 2.4.2
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.290000] NET: Registered protocol family 24
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.300000] usbcore: registered new interface driver qmi_wwan
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.310000] usbcore: registered new interface driver rndis_host
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.320000] usbcore: registered new interface driver sierra
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.330000] usbserial: USB Serial support registered for Sierra USB modem
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.340000] usbcore: registered new interface driver sierra_net
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.380000] usbcore: registered new interface driver option
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.390000] usbserial: USB Serial support registered for GSM modem (1-port)
Sat Dec 14 20:18:03 2013 kern.debug kernel: [ 11.420000] ath: EEPROM regdomain: 0x0
Sat Dec 14 20:18:03 2013 kern.debug kernel: [ 11.420000] ath: EEPROM indicates default country code should be used
Sat Dec 14 20:18:03 2013 kern.debug kernel: [ 11.420000] ath: doing EEPROM country->regdmn map search
Sat Dec 14 20:18:03 2013 kern.debug kernel: [ 11.420000] ath: country maps to regdmn code: 0x3a
Sat Dec 14 20:18:03 2013 kern.debug kernel: [ 11.420000] ath: Country alpha2 being used: US
Sat Dec 14 20:18:03 2013 kern.debug kernel: [ 11.420000] ath: Regpair used: 0x3a
Sat Dec 14 20:18:03 2013 kern.debug kernel: [ 11.430000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.440000] cfg80211: Calling CRDA for country: US
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.450000] cfg80211: Regulatory domain changed to country: US
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.450000] cfg80211: DFS Master region FCC
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.460000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.460000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.470000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 1700 mBm)
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.480000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2400 mBm)
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.490000] cfg80211: (5490000 KHz - 5600000 KHz @ 80000 KHz), (300 mBi, 2400 mBm)
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.500000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2400 mBm)
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.500000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 3000 mBm)
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.510000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
Sat Dec 14 20:18:03 2013 kern.info kernel: [ 11.520000] ieee80211 phy0: Atheros AR9340 Rev:0 mem=0xb8100000, irq=47
Sat Dec 14 20:18:04 2013 user.emerg syslog: uinteger - 9 = true
Sat Dec 14 20:18:05 2013 authpriv.info dropbear[646]: Not backgrounding
Sat Dec 14 20:18:08 2013 kern.info kernel: [ 19.100000] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Sat Dec 14 20:18:08 2013 kern.info kernel: [ 19.100000] device eth1 entered promiscuous mode
Sat Dec 14 20:18:08 2013 kern.info kernel: [ 19.110000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Sat Dec 14 20:18:08 2013 daemon.notice netifd: Interface 'lan' is now up
Sat Dec 14 20:18:08 2013 daemon.notice netifd: Interface 'loopback' is now up
Sat Dec 14 20:18:09 2013 kern.info kernel: [ 19.710000] eth1: link up (1000Mbps/Full duplex)
Sat Dec 14 20:18:09 2013 kern.info kernel: [ 19.710000] br-lan: port 1(eth1) entered forwarding state
Sat Dec 14 20:18:09 2013 kern.info kernel: [ 19.720000] br-lan: port 1(eth1) entered forwarding state
Sat Dec 14 20:18:09 2013 kern.info kernel: [ 19.730000] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Sat Dec 14 20:18:09 2013 kern.info kernel: [ 19.820000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Sat Dec 14 20:18:09 2013 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Sat Dec 14 20:18:09 2013 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Sat Dec 14 20:18:09 2013 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Sat Dec 14 20:18:10 2013 kern.info kernel: [ 20.680000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sat Dec 14 20:18:10 2013 kern.info kernel: [ 20.700000] device wlan0 entered promiscuous mode
Sat Dec 14 20:18:10 2013 kern.info kernel: [ 20.710000] br-lan: port 2(wlan0) entered forwarding state
Sat Dec 14 20:18:10 2013 kern.info kernel: [ 20.720000] br-lan: port 2(wlan0) entered forwarding state
Sat Dec 14 20:18:10 2013 kern.info kernel: [ 20.720000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sat Dec 14 20:18:11 2013 kern.info kernel: [ 21.720000] br-lan: port 1(eth1) entered forwarding state
Sat Dec 14 20:18:12 2013 kern.info kernel: [ 22.720000] br-lan: port 2(wlan0) entered forwarding state
Sat Dec 14 20:18:12 2013 daemon.info dnsmasq[1033]: started, version 2.66 cachesize 150
Sat Dec 14 20:18:12 2013 daemon.info dnsmasq[1033]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth
Sat Dec 14 20:18:12 2013 daemon.info dnsmasq-dhcp[1033]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Sat Dec 14 20:18:12 2013 daemon.info dnsmasq[1033]: using local addresses only for domain lan
Sat Dec 14 20:18:12 2013 daemon.warn dnsmasq[1033]: no servers found in /tmp/resolv.conf.auto, will retry
Sat Dec 14 20:18:12 2013 daemon.info dnsmasq[1033]: read /etc/hosts - 1 addresses
Sat Dec 14 20:18:12 2013 daemon.info dnsmasq[1033]: read /tmp/hosts/6relayd - 0 addresses
Sat Dec 14 20:18:12 2013 daemon.info dnsmasq-dhcp[1033]: read /etc/ethers - 0 addresses
Sat Dec 14 20:18:12 2013 daemon.info dnsmasq-dhcp[1033]: DHCPREQUEST(br-lan) 192.168.1.179 c8:60:00:2e:36:6d
Sat Dec 14 20:18:12 2013 daemon.info dnsmasq-dhcp[1033]: DHCPACK(br-lan) 192.168.1.179 c8:60:00:2e:36:6d ToughPC
Sat Dec 14 20:18:13 2013 daemon.info dnsmasq[1033]: read /etc/hosts - 1 addresses
Sat Dec 14 20:18:13 2013 daemon.info dnsmasq[1033]: read /tmp/hosts/6relayd - 1 addresses
Sat Dec 14 20:18:13 2013 daemon.info dnsmasq-dhcp[1033]: read /etc/ethers - 0 addresses
Sat Dec 14 20:18:13 2013 user.emerg syslog: Error: Unable to open database directory "/var/lib/vnstat".
Sat Dec 14 20:18:13 2013 user.emerg syslog: Make sure it exists and is at least read enabled for current user.
Sat Dec 14 20:18:13 2013 user.emerg syslog: Exiting...
Sat Dec 14 20:18:13 2013 user.emerg syslog: vnstat = 0 0 0
Sat Dec 14 20:18:13 2013 user.emerg syslog: uinteger - 9 = true
Sat Dec 14 20:18:14 2013 user.emerg syslog: setting up led WAN
Sat Dec 14 20:18:14 2013 user.emerg syslog: setting up led LAN1
Sat Dec 14 20:18:14 2013 user.emerg syslog: setting up led LAN2
Sat Dec 14 20:18:14 2013 user.emerg syslog: setting up led LAN3
Sat Dec 14 20:18:14 2013 user.emerg syslog: setting up led LAN4
Sat Dec 14 20:18:14 2013 user.emerg syslog: setting up led WLAN
Sat Dec 14 20:18:14 2013 user.emerg syslog: setting up led USB
Sat Dec 14 20:18:14 2013 user.emerg syslog: - init complete -
Sat Dec 14 20:18:14 2013 daemon.notice vnstatd[1157]: vnStat daemon 1.11 started.
Sat Dec 14 20:18:14 2013 daemon.notice vnstatd[1157]: Monitoring: br-lan eth0
Sat Dec 14 20:18:24 2013 user.notice usb-modeswitch: Ignoring Linux Hub
Sat Dec 14 20:19:38 2013 kern.info kernel: [ 108.770000] usb 1-1: new high-speed USB device number 2 using ehci-platform
Sat Dec 14 20:19:38 2013 user.notice usb-modeswitch: 1-1: Manufacturer=Pantech,_Incorporated Product=UMW190_USB_Modem Serial=? 106c 3716 1 0
Sat Dec 14 20:19:38 2013 user.notice usb-modeswitch: *******************************************************
Sat Dec 14 20:19:38 2013 user.notice usb-modeswitch: *
Sat Dec 14 20:19:38 2013 user.notice usb-modeswitch: * Start of Modem Detection and Connection Information
Sat Dec 14 20:19:38 2013 user.notice usb-modeswitch: *
Sat Dec 14 20:19:38 2013 user.notice usb-modeswitch: * Product=UMW190_USB_Modem 106c 3716
Sat Dec 14 20:19:38 2013 user.notice usb-modeswitch: *
Sat Dec 14 20:19:38 2013 user.notice usb-modeswitch: *******************************************************
Sat Dec 14 20:19:48 2013 user.notice usb-modeswitch: *******************************************************
Sat Dec 14 20:19:48 2013 user.notice usb-modeswitch: *
Sat Dec 14 20:19:48 2013 user.notice usb-modeswitch: * Switched to : 106c:3716
Sat Dec 14 20:19:48 2013 user.notice usb-modeswitch: *
Sat Dec 14 20:19:48 2013 user.notice usb-modeswitch: *******************************************************
Sat Dec 14 20:19:48 2013 user.notice usb-modeswitch: *******************************************************
Sat Dec 14 20:19:48 2013 user.notice usb-modeswitch: *
Sat Dec 14 20:19:49 2013 user.notice usb-modeswitch: * ProtoFind returns : 0
Sat Dec 14 20:19:49 2013 user.notice usb-modeswitch: *
Sat Dec 14 20:19:49 2013 user.notice usb-modeswitch: *******************************************************
Sat Dec 14 20:19:49 2013 user.notice usb-modeswitch: 1-1:1.0: Manufacturer=Pantech,_Incorporated Product=UMW190_USB_Modem Serial=? 106c 3716 1 1
Sat Dec 14 20:19:49 2013 user.notice usb-modeswitch: 1-1:1.1: Manufacturer=Pantech,_Incorporated Product=UMW190_USB_Modem Serial=? 106c 3716 1 1
Sat Dec 14 20:19:49 2013 user.notice usb-modeswitch: 1-1:1.2: Manufacturer=Pantech,_Incorporated Product=UMW190_USB_Modem Serial=? 106c 3716 1 1
Sat Dec 14 20:19:49 2013 user.notice usb-modeswitch: 1-1:1.3: Manufacturer=Pantech,_Incorporated Product=UMW190_USB_Modem Serial=? 106c 3716 1 1
Sat Dec 14 20:19:49 2013 user.notice usb-modeswitch: 1-1:1.4: Manufacturer=Pantech,_Incorporated Product=UMW190_USB_Modem Serial=? 106c 3716 1 1
  0  
  0  
#1
Опции
Re: Настройка на базе OpenWRT Of Modems and Men
2014-01-10 10:21:16
А разве Ваш модем поддерживается OpenWRT?
  0  
  0  
#1
Опции
Re: Настройка на базе OpenWRT Of Modems and Men
2014-01-17 07:43:30
[quote="выпъ"]мегафон м150-1 завелся без проблем на v1
upd: на утро комп без инета, хотя в статусе роутера онлайн, так как и должно быть....будем копать дальше[/quote]
в общем расклад такой, не чего не делал, просто воткнул модем.. уже неделя без разрывов, все робит
  0  
  0  
#1
Опции

Информация

Поблагодарили: 0

Просмотры: 99853

Ответы: 284

Статьи по теме