Неудачная прошивка (питание пропало во время прошивки)
Эта ветка закрыта для дальнейших ответов. Вы можете создать новую тему, чтобы поделиться своими идеями или задать вопросы.
Неудачная прошивка (питание пропало во время прошивки)
Версия прошивки: ?
Ваша страна: Узбекистан
Тип подключения: PPPoE
Скорость по тарифу: 1 Мбит/c
Подключение с ПК по wifi или по кабелю?: кабель
Ваша операционная система: Win7
Решил обновить прошивку с офф.сайта на TD-W8968_V2_140514, но в какой-то момент прошивки кратковременно отключилось питание (свет моргнул)...
Устройство перестало выдавать IP, сайт с настройками не открывается...
подключился через TX/RX, вот что на экране:
RT63365 at Tue May 13 17:00:41 HKT 2014 version 1.0
Memory size 32MB
flash base: b0000000
Found SPI Flash 8MiB Winbond W25Q64 at 0xb0000000
TCSUPPORT_MULTI_UPGRADE
1
Search PHY addr and found PHY addr=0
2
Press any key in 0.1 secs to enter boot command mode.
..
Invalid Power GPIO, just return and don't turn on Power LED
Decompress to 80020000 free_mem_ptr=80600000 free_mem_ptr_end=80780000
Uncompressing [LZMA] ... done.
Linux version 2.6.22.15 (root@localhost.localdomain) (gcc version 4.3.4 (GCC) ) #108 SMP Fri May 16 10:55:34 HKT 2014
ISPRAM0: PA=00288000,Size=00008000,enabled
Enable SRAM=1c000001
Ralink RT63365 SOC prom init
CPU revision is: 00019555
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
3 available secondary CPU TC(s)
Built 1 zonelists. Total pages: 8128
Kernel command line: console=ttyS0 rootfstype=squashfs es=1
Primary instruction cache 64kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (23 instructions).
Synthesized TLB load handler fastpath (37 instructions).
Synthesized TLB store handler fastpath (37 instructions).
Synthesized TLB modify handler fastpath (36 instructions).
Cache parity protection disabled
PID hash table entries: 128 (order: 7, 512 bytes)
CPU frequency 420.00 MHz
Using 250.000 MHz high precision timer.
console handover: boot [early0] -> real [ttyS0]
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 28916k/32768k available (2496k kernel code, 3852k reserved, 487k data, 156k init, 0k highmem)
SLUB: Genslabs=17, HWalign=32, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
Mount-cache hash table entries: 512
34K sync es set to 1.
Config7: 0x80080500
FPU Affinity set after 929 emulations
Limit of 4 TCs set
TLB of 64 entry pairs shared by 2 VPEs
VPE 0: TC 0 1 2, VPE 1: TC 3
IPI buffer pool of 32 buffers
CPU revision is: 00019555
TC 1 going on-line as CPU 1
CPU revision is: 00019555
TC 2 going on-line as CPU 2
CPU revision is: 00019555
TC 3 going on-line as CPU 3
Brought up 4 CPUs
migration_cost=10000
NET: Registered protocol family 16
RT63365_pcie_init
registering PCI controller with io_map_base unset
PCI: Bridge: 0000:00:00.0
IO window: disabled.
MEM window: 20000000-200fffff
PREFETCH window: disabled.
NET: Registered protocol family 8
NET: Registered protocol family 20
NET: Registered protocol family 2
Time: MIPS clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 12288 bytes)
TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
TC3162 hardware watchdog module loaded.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
fuse init (API version 7.8)
io scheduler noop registered
io scheduler deadline registered (default)
ttyS0 at I/O 0xbfbf0003 (irq = 1) is a TC3162
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
PPP generic driver version 2.4.2
NET: Registered protocol family 24
Register flash device:flash0
tc3162: flash device 0x01000000 at 0x10000000
tc3162: Found SPIFLASH 8MiB Winbond W25Q64
Creating 6 MTD partitions on "tc3162":
0x00000000-0x00020000 : "boot"
0x00020000-0x00130000 : "kernel"
0x00130000-0x007d0000 : "rootfs"
0x007d0000-0x007e0000 : "romfile"
0x007e0000-0x007f0000 : "config"
0x007f0000-0x00800000 : "radio"
RT3xxx EHCI/OHCI init.
Mirror/redirect action on
u32 classifier
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (256 buckets, 5120 max)
ctnetlink v0.93: registering with nfnetlink.
IPv4 over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
Ebtables v2.0 registered
ebt_ftos registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
RT63365 at Tue May 13 17:00:41 HKT 2014 version 1.0
Memory size 32MB
flash base: b0000000
Found SPI Flash 8MiB Winbond W25Q64 at 0xb0000000
TCSUPPORT_MULTI_UPGRADE
1
Search PHY addr and found PHY addr=0
2
Press any key in 0.1 secs to enter boot command mode.
bldr> ?
? Print out help messages.
help Print out help messages.
go Booting the linux kernel.
decomp Decompress kernel image to ram.
memrl <addr> Read a word from addr.
memwl <addr> <value> Write a word to addr.
dump <addr> <len> Dump memory content.
jump <addr> Jump to addr.
flash <dst> <src> <len> Write to flash from src to dst.
xmdm <addr> <len> Xmodem receive to addr.
miir <phyaddr> <reg> Read ethernet phy reg.
miiw <phyaddr> <reg> <value> Write ethernet phy reg.
cpufreq <freq num> / <m> <n> Set CPU Freq <156~450>(freq has to be multiple of 6)
ipaddr <ip addr> Change modem's IP.
httpd Start Web Server
ddrdrv <..> Change DDR driving length
bldr> ipaddr 192.168.1.123
Change IP address to 192.168.1.123
bldr> httpd
PBUF_POOL_BUFSIZE = 256
tcp_bind()
Local Port = 0
tcp_bind: bind to port 80
bldr> START TO RECEIVE the FILE
..............................................................................................................................................................................................................................................
START TO CLOSE the FILE
Received file:
rcvdata_size = 8192512
start = 0x80020241
Real crc code: FFFFFF
Check data fail, upload failed
...
Fail to upload firmware!