TL-WR703N и udpxy
Эта ветка закрыта для дальнейших ответов. Вы можете создать новую тему, чтобы поделиться своими идеями или задать вопросы.
TL-WR703N и udpxy
lsusb:
Bus 001 Device 002: ID 0b95:772a ASIX Electronics Corp. AX88772A Fast Ethernet
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
6relayd - 2013-06-23-8ee708101d521382d41a716e45d78fa9f190e00e
base-files - 141-r37237
block-mount - 2014-06-22-e0430f5c62f367e5a8e02755412977b02c3fc45e
busybox - 1.19.4-6
dnsmasq - 2.66-3
dropbear - 2012.55-2
firewall - 2013-07-04
ip6tables - 1.4.19.1-1
iptables - 1.4.19.1-1
iw - 3.10-1
jshn - 2013-07-04-11e8afea0f7eb34f8c23a8e589ee659c46f3f8aa
kernel - 3.8.13-1-02c2be06eedd8f3fb00bc10e23486f17
kmod-ath - 3.8.13+2013-06-27-1
kmod-ath9k - 3.8.13+2013-06-27-1
kmod-ath9k-common - 3.8.13+2013-06-27-1
kmod-cfg80211 - 3.8.13+2013-06-27-1
kmod-crypto-aes - 3.8.13-1
kmod-crypto-arc4 - 3.8.13-1
kmod-crypto-core - 3.8.13-1
kmod-crypto-hash - 3.8.13-1
kmod-crypto-manager - 3.8.13-1
kmod-fs-ext4 - 3.10.49-1
kmod-gpio-button-hotplug - 3.8.13-1
kmod-ip6tables - 3.8.13-1
kmod-ipt-conntrack - 3.8.13-1
kmod-ipt-core - 3.8.13-1
kmod-ipt-nat - 3.8.13-1
kmod-ipt-nathelper - 3.8.13-1
kmod-ipv6 - 3.8.13-1
kmod-leds-gpio - 3.8.13-1
kmod-ledtrig-default-on - 3.8.13-1
kmod-ledtrig-netdev - 3.8.13-1
kmod-ledtrig-timer - 3.8.13-1
kmod-ledtrig-usbdev - 3.8.13-1
kmod-lib-crc-ccitt - 3.8.13-1
kmod-lib-crc16 - 3.10.49-1
kmod-libphy - 3.10.49-1
kmod-mac80211 - 3.8.13+2013-06-27-1
kmod-mii - 3.10.49-1
kmod-nls-base - 3.8.13-1
kmod-ppp - 3.8.13-1
kmod-pppoe - 3.8.13-1
kmod-pppox - 3.8.13-1
kmod-scsi-core - 3.10.49-1
kmod-usb-core - 3.8.13-1
kmod-usb-net - 3.10.49-1
kmod-usb-net-asix - 3.10.49-1
kmod-usb-ohci - 3.8.13-1
kmod-usb-storage - 3.10.49-1
kmod-usb-uhci - 3.10.49-1
kmod-usb2 - 3.8.13-1
kmod-wdt-ath79 - 3.8.13-1
libblobmsg-json - 2013-07-04-11e8afea0f7eb34f8c23a8e589ee659c46f3f8aa
libc - 0.9.33.2-1
libgcc - 4.6-linaro-1
libip4tc - 1.4.19.1-1
libip6tc - 1.4.19.1-1
libjson-c - 0.11-2
libjson-script - 2013-07-04-11e8afea0f7eb34f8c23a8e589ee659c46f3f8aa
libnl-tiny - 0.1-3
libpthread - 0.9.33.2-1
librt - 0.9.33.2-1
libubox - 2013-07-04-11e8afea0f7eb34f8c23a8e589ee659c46f3f8aa
libubus - 2013-05-30-f72dca720bb50d45b1b01bab5b01cb80c78c5230
libuci - 2013-06-11.1-1
libusb-1.0 - 1.0.9-1
libxtables - 1.4.19.1-1
mtd - 20
netifd - 2013-06-18.1-987bdc77deecb928d86b9d710cc3bcfa5b3d80eb
odhcp6c - 2013-07-03-007ae1a6ae8092878adccde1f610ea9dd86e5aad
opkg - 618-3
ppp - 2.4.5-10
ppp-mod-pppoe - 2.4.5-10
procd - 2013-07-08-725e6bbbe403a950c0ddcd23cb521ffefa705c7d
swconfig - 10
uboot-envtools - 2013.07-rc1-1
ubox - 2013-07-02-267dd987b1aec750f8839d1d8d8c2f80d9f1107e
ubus - 2013-05-30-f72dca720bb50d45b1b01bab5b01cb80c78c5230
ubusd - 2013-05-30-f72dca720bb50d45b1b01bab5b01cb80c78c5230
uci - 2013-06-11.1-1
udpxy - 1.0.23-9-4
usbutils - 007-1
wpad-mini - 20130630-2
zlib - 1.2.8-1
[ 0.000000] Linux version 3.8.13 (openwrt@snapon) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2012.12 r37237) ) #1 Thu Jul 11 10:37:45 PDT 2013
[ 0.000000] MyLoader: sysp=388dd517, boardp=04505212, parts=7709ac36
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
[ 0.000000] SoC: Atheros AR9330 rev 1
[ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 80318a40, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: board=TL-WR703N console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 28724k/32768k available (2280k kernel code, 4044k reserved, 593k data, 260k init, 0k highmem)
[ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[ 0.080000] pid_max: default: 32768 minimum: 301
[ 0.080000] Mount-cache hash table entries: 512
[ 0.090000] NET: Registered protocol family 16
[ 0.090000] MIPS: machine is TP-LINK TL-WR703N v1
[ 0.350000] bio: create slab <bio-0> at 0
[ 0.360000] Switching to clocksource MIPS
[ 0.360000] NET: Registered protocol family 2
[ 0.370000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[ 0.370000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[ 0.370000] TCP: Hash tables configured (established 512 bind 512)
[ 0.380000] TCP: reno registered
[ 0.380000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.390000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.400000] NET: Registered protocol family 1
[ 0.400000] PCI: CLS 0 bytes, default 32
[ 0.420000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.420000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.430000] msgmni has been set to 56
[ 0.440000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.440000] io scheduler noop registered
[ 0.450000] io scheduler deadline registered (default)
[ 0.450000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.460000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
[ 0.470000] console [ttyATH0] enabled, bootconsole disabled
[ 0.480000] ath79-spi ath79-spi: master is unqueued, this is deprecated
[ 0.490000] m25p80 spi0.0: found en25q32b, expected m25p80
[ 0.490000] m25p80 spi0.0: en25q32b (4096 Kbytes)
[ 0.500000] 5 tp-link partitions found on MTD device spi0.0
[ 0.500000] Creating 5 MTD partitions on "spi0.0":
[ 0.510000] 0x000000000000-0x000000020000 : "u-boot"
[ 0.520000] 0x000000020000-0x00000011fb7c : "kernel"
[ 0.520000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.530000] 0x00000011fb7c-0x0000003f0000 : "rootfs"
[ 0.540000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.550000] mtd: partition "rootfs" set to be root filesystem
[ 0.560000] mtd: partition "rootfs_data" created automatically, ofs=2E0000, len=110000
[ 0.560000] 0x0000002e0000-0x0000003f0000 : "rootfs_data"
[ 0.570000] 0x0000003f0000-0x000000400000 : "art"
[ 0.580000] 0x000000020000-0x0000003f0000 : "firmware"
[ 0.600000] libphy: ag71xx_mdio: probed
[ 0.600000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[ 1.150000] ag71xx ag71xx.0 eth0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
[ 1.160000] TCP: cubic registered
[ 1.170000] NET: Registered protocol family 17
[ 1.170000] Bridge firewalling registered
[ 1.180000] 8021q: 802.1Q VLAN Support v1.8
[ 1.190000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 1.190000] Freeing unused kernel memory: 260k freed
[ 3.280000] usbcore: registered new interface driver usbfs
[ 3.290000] usbcore: registered new interface driver hub
[ 3.290000] usbcore: registered new device driver usb
[ 3.520000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.530000] ehci-platform: EHCI generic platform driver
[ 3.530000] ehci-platform ehci-platform: EHCI Host Controller
[ 3.540000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[ 3.550000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[ 3.570000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[ 3.570000] hub 1-0:1.0: USB hub found
[ 3.570000] hub 1-0:1.0: 1 port detected
[ 3.640000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.040000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 7.160000] eth0: link up (100Mbps/Full duplex)
[ 7.490000] jffs2: notice: (334) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 11 of xref (0 dead, 2 orphan) found.
[ 7.530000] eth0: link down
[ 9.030000] Loading modules backported from Linux version master-2013-06-27-0-gdcfa6d5
[ 9.030000] Backport generated by backports.git backports-20130617-4-ge3220f5
[ 9.130000] cfg80211: Calling CRDA to update world regulatory domain
[ 9.130000] cfg80211: World regulatory domain updated:
[ 9.140000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.140000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.150000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.160000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.170000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.170000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.450000] NET: Registered protocol family 10
[ 9.960000] ath: EEPROM regdomain: 0x0
[ 9.960000] ath: EEPROM indicates default country code should be used
[ 9.960000] ath: doing EEPROM country->regdmn map search
[ 9.960000] ath: country maps to regdmn code: 0x3a
[ 9.960000] ath: Country alpha2 being used: US
[ 9.960000] ath: Regpair used: 0x3a
[ 9.960000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 9.970000] cfg80211: Calling CRDA for country: US
[ 9.970000] cfg80211: Regulatory domain changed to country: US
[ 9.980000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.990000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 9.990000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 10.000000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.010000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.020000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.030000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 10.030000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
[ 10.190000] PPP generic driver version 2.4.2
[ 10.530000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.560000] xt_time: kernel timezone is -0000
[ 10.620000] NET: Registered protocol family 24
[ 10.730000] nf_conntrack version 0.5.0 (452 buckets, 1808 max)
[ 11.490000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 15.910000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.910000] device eth0 entered promiscuous mode
[ 15.920000] IPv6: ADDRCONF(NETDEV_UP): br-lan0: link is not ready
[ 16.390000] eth0: link up (100Mbps/Full duplex)
[ 16.390000] br-lan0: port 1(eth0) entered forwarding state
[ 16.400000] br-lan0: port 1(eth0) entered forwarding state
[ 16.400000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 16.410000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan0: link becomes ready
[ 18.400000] br-lan0: port 1(eth0) entered forwarding state
config interface 'lan0'
option ifname 'eth0'
option type 'bridge'
option proto 'static'
option ipaddr '192.168.100.100'
option netmask '255.255.255.0'
option ip6assign '60'
option gateway '192.168.100.1'
option igmp_snooping 1
list dns '8.8.8.8'
config interface 'lan1'
option ifname 'eth1'
option proto 'dhcp'
option igmp_snooping 1
config rule
option name 'Allow-IGMP'
option src 'lan'
option proto 'igmp'
option target 'ACCEPT'
config rule
option name 'Allow-IPTV-UDPXY'
option src 'lan'
option proto 'all'
option dest_ip '224.0.0.0/4'
option target 'ACCEPT'