Tp link 740(KS)-741-Kyivstar перепрошивка -востановление

Эта ветка закрыта для дальнейших ответов. Вы можете создать новую тему, чтобы поделиться своими идеями или задать вопросы.

Tp link 740(KS)-741-Kyivstar перепрошивка -востановление

kestua

2015-10-20 05:05:01

Посты: 17

Полезный: 0

Решения: 0

Истории: 0

Дата регистрации: 2012-12-08

Tp link 740(KS)-741-Kyivstar перепрошивка -востановление

2015-10-20 05:05:01

Аппаратная версия устройства: 2.4
Версия прошивки: Ks
Ваша страна: Ua
Название провайдера: Altair
Тип подключения: Pptp
Скорость по тарифу: 100M
Подключение с ПК по wifi или по кабелю?: Wiffi
Если наблюдаются разрывы, то как часто?: редко
Ваша операционная система: Windows7
Антивирусные программы и фаерволы: Msi
После прошивки с киевстаровской на официальную
Через время начала слетать прошивка.
Причина:включение wifi.
Установил open wrt -с отключенным wifi работает.
заливал на программаторе полный дамп прошивки .
с родными мак и пин.та же беда.
на 2 роутерах 740такая проблема .другие шились без проблем.
А также на WR-741(rev2.0ks)слетает.
Поставил мод загрузчик "breed" пробовал разные прошивки стартуют прошивки от3420rev1 но только вкл wifi сразу ребут.
Нужна схема цепи. Может что по питанию wifi. Или не может поставить дрова на wifi

прошивал разными способами -tftp
прошивка полного дампа:
tftp 0x80000000 full.bin
erase 0x9f000000 +0x400000
cp.b 0x80000000 0x9f000000 0x400000
bootm 0x9f020000
====================================
прошивка загрузчика:
uboot：
tftp 0x80000000 uboot.bin
erase 0x9f000000 +0x20000
cp.b 0x80000000 0x9f000000 0x20000
bootm 0x9f020000
====================================
MAC: 0001FC00
KLASS:0001FD00
PIN: 1FE00

========================== U-Boot 1.1.4 (Sep 3 2010 - 12:28:13)

AP91 (ar7240) U-boot
DRAM:
sri
#### TAP VALUE 1 = 8, 2 = 8
32 MB
id read 0x100000ff
flash size 4194304, sector count = 64
Flash: 4 MB
Using default environment

BOARD IS NOT CALIBRATED!!!
In: serial
Out: serial
Err: serial
Net: ag7240_enet_initialize...
No valid address in Flash. Using fixed address
: cfg1 0xf cfg2 0x7014
eth0: 00:03:7f:09:0b:ad
eth0 up
No valid address in Flash. Using fixed address
: cfg1 0xf cfg2 0x7214
eth1: 00:03:7f:09:0b:ad
ATHRS26: resetting s26
ATHRS26: s26 reset done
eth1 up
eth0, eth1
Autobooting in 1 seconds
## Booting image at 9f020000 ...
Uncompressing Kernel Image ... OK

Starting kernel ...

Booting AR7240(Python)...
Linux version 2.6.15--LSDK-7.3.0.300 gcc version 3.4.4 #1 Mon May 31 09:58:33 CS T 2010
flash_size passed from bootloader = 4
CPU revision is: 00019374
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
User-defined physical RAM map:
memory: 02000000 @ 00000000 (usable)
Built 1 zonelists
Kernel command line: console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashf s init=/sbin/init mtdparts=ar7100-nor0:128k(u-boot),1024k(kernel),2816k(rootfs), 64k(config),64k(art) mem=32M
Primary instruction cache 64kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
Cache parity protection disabled
PID hash table entries: 256 (order: 8, 4096 bytes)
Using 175.000 MHz high precision timer.
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 30532k/32768k available (1382k kernel code, 2220k reserved, 293k data, 1 28k init, 0k highmem)
Mount-cache hash table entries: 512
Checking for 'wait' instruction... available.
NET: Registered protocol family 16
Returning IRQ 48
AR7240 GPIOC major 0
squashfs: version 3.3 (2007/10/31) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered
HDLC line discipline: version $Revision: #1 $, maxframe=4096
N_HDLC line discipline registered.
Serial: 8250/16550 driver $Revision: #1 $ 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x0 (irq = 19) is a 16550A
RAMDISK driver initialized: 1 RAM disks of 8192K size 1024 blocksize
PPP generic driver version 2.4.2
NET: Registered protocol family 24
cmdlinepart partition parsing not available
Searching for RedBoot partition table
5 RedBoot partitions found on MTD device ar7240-nor0
Creating 5 MTD partitions on "ar7240-nor0":
0x00000000-0x00020000 : "boot"
0x00020000-0x00120000 : "kernel"
0x00120000-0x003e0000 : "rootfs"
0x003e0000-0x003f0000 : "config"
0x003f0000-0x00400000 : "art"
->Oops: flash id 0x10215 .
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 128k freed
init started: BusyBox v1.01 (2010.05.31-02:04+0000) multi-call binary
Algorithmics/MIPS FPU Emulator v1.5
ip_conntrack version 2.4 (256 buckets, 5120 max) - 244 bytes per conntrack
insmod: cannot open module `/lib/modules/2.6.15/kernel/flashid.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/harmony.ko': No such file or directory
Now flash open!
Now flash open!
sys_mode=0 mac:81070000 ag7240_macs[0]:00000000 ag7240_macs[1]:81070000
2
sys_mode=0 mac:81c10000 ag7240_macs[0]:81c10000 ag7240_macs[1]:81070000
1
+++ pvid_bitmap initial

(none) mips #1 Mon May 31 09:58:33 CST 2010 (none)
(none) login: sys_mode 0 PHY4 auto-negotiation enable
Attention: PHY4 Class A setting in debug 5 register which is not described in D S
phy_setup ethUnit:0 phyUnit:4
Port 4, Neg Success
++++ phy_up is 1, fdx is 1, speed is 1
ATHRS26: resetting s26
ATHRS26: s26 reset done
sys_mode 0 PHY0 auto-negotiation enable
Attention: PHY 0 Class A setting in debug 5 register which is not described in DS
sys_mode 0 PHY1 auto-negotiation enable
Attention: PHY 1 Class A setting in debug 5 register which is not described in DS
sys_mode 0 PHY2 auto-negotiation enable
Attention: PHY 2 Class A setting in debug 5 register which is not described in DS
sys_mode 0 PHY3 auto-negotiation enable
Attention: PHY 3 Class A setting in debug 5 register which is not described in DS
++++ athrs26_igmp_setup once
vtable vid: 0x00000002, bitmap 0x00000003
vtable vid: 0x00000004, bitmap 0x00000005
vtable vid: 0x00000006, bitmap 0x00000007
vtable vid: 0x00000008, bitmap 0x00000009
vtable vid: 0x0000000a, bitmap 0x0000000b
vtable vid: 0x0000000c, bitmap 0x0000000d
vtable vid: 0x0000000e, bitmap 0x0000000f
vtable vid: 0x00000010, bitmap 0x00000011
vtable vid: 0x00000012, bitmap 0x00000013
vtable vid: 0x00000014, bitmap 0x00000015
vtable vid: 0x00000016, bitmap 0x00000017
vtable vid: 0x00000018, bitmap 0x00000019
vtable vid: 0x0000001a, bitmap 0x0000001b
vtable vid: 0x0000001c, bitmap 0x0000001d
vtable vid: 0x0000001e, bitmap 0x0000001f
vtable vid: 0x00000020, bitmap 0x00000021
++ PVID: 0x0000001a, bitmap: 0x0000001f
++ PVID: 0x0000001a, bitmap: 0x0000001f
++ PVID: 0x0000001c, bitmap: 0x0000001f
++ PVID: 0x0000001e, bitmap: 0x0000001f
++ PVID: 0x00000020, bitmap: 0x0000001f
phy_setup ethUnit:1 phyUnit:0
phy_setup ethUnit:1 phyUnit:1
phy_setup ethUnit:1 phyUnit:2
phy_setup ethUnit:1 phyUnit:3
Port 0, Neg Success
Port 1, Neg Success
Port 2, Neg Success
Port 3, Neg Success
device eth0 entered promiscuous mode
phy_setup ethUnit:1 phyUnit:0
phy_setup ethUnit:1 phyUnit:1
phy_setup ethUnit:1 phyUnit:2
phy_setup ethUnit:1 phyUnit:3
Port 0, Neg Success
Port 1, Neg Success
Port 2, Neg Success
Port 3, Neg Success
++++ phy_up is 1, fdx is 1, speed is 1
AG7240: enet unit:0 phy:4 is up...Mii 100Mbps full duplex
AG7240: enet unit 0 phy 4 mode 0x4c04
restoring factory default...
++++ phy_up is 1, fdx is 1, speed is 1
AG7240: enet unit:1 phy:0 is up...Mii 100Mbps full duplex
AG7240: enet unit 1 phy 0 mode 0x4c04
br0: port 1(eth0) entering learning state
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
+++ GE0 RX DMA ENABLE
Now flash open!
Now flash open!
Now flash open!
Erase from 0X3E0000 to 0X3EC0B4:.
Program from 0X3E0000 to 0X3EC0B4:
write successfully
Now flash open!
Erase from 0X3E0000 to 0X3EC0B4:.
Program from 0X3E0000 to 0X3EC0B4:
write successfully
umount: /var: Device or resource busy
umount: /tmp: Device or resource busy
The system is going down NOW !!
Sending SIGKILL to all processes.
Please stand by while rebooting the system.
Restarting system.

11 Ответить

kestua

LV0

2015-10-20 14:59:11

Посты: 17

Полезный: 0

Решения: 0

Истории: 0

Дата регистрации: 2012-12-08

Re: Tp link 740(KS)-741-Kyivstar перепрошивка -востановлен

2015-10-20 14:59:11

принесли с слетевшей прошивкой.но такой же был рабочий-нужно было откатить на сток для перехода на другой оператор

Tp link 740(KS)-741-Kyivstar перепрошивка -востановление

Tp link 740(KS)-741-Kyivstar перепрошивка -востановление

Информация

Избиратели 0

Теги