Отваливается web интерфейс через день-два работы роутера
Эта ветка закрыта для дальнейших ответов. Вы можете создать новую тему, чтобы поделиться своими идеями или задать вопросы.
Re: Отваливается web интерфейс через день-два работы роутера
My name is Marcin. This is my first post here. I'm sorry that i do noy type in Russian, but i do not know this language, and i do not want to "brake" it with translators. I find this forum by searching for my problem, that i have with TL-WR1043ND since i bought it last year. The problem is, periodically it hangs, and WWW panel stop to work. I contacted with TP-Link support, but for my country, there is no TP-Link support at all, and outside i didn't get any help. I start to read Your forum for few days now, and i think i got similar problem. I would like to maybe help, if i can, and share with You all the informations i got. Maybe they can help You. Forst some information about my network:
I live in Poland, my ISP is "Dialog". I got Speedstream 4100 modem, which i connect with my 1043ND. I use PPPoE connection. I receive dynamic IP and DNS setings from DHCP at connection. This is my home network topology:
- internet connection lost
- no DHCP on LAN/WiFi interface
- router respond on ping correctly!
- when trying to load www panel there is only blank page, but it asks for login/pass
- i can;t ping device from WAN side, and i can;t connect with it from outside (i'm trying to connect because i opened panel for remote IPs).
I use:
WPA-PSK (AES encryption) with password,
Channel is 10,
MAC filtering is disabled,
Wierelss advanced option are default (transmit power high, beacon 100, RTS 2346, same fragmentation, DTIM 1, Enable WMM),
DHCP Enabled from 192.168.1.100 up to 192.168.1.199,
5 or 6 clients usually use the router,
Address reservation for 3 hosts (192.168.1.108, 192.168.1.35 and 192.168.1.100),
USB status stopped (i donot have anything connected),
FTP stopped and disabled,
Media server stopped,
User account left default (for ftp/media server),
Virtual servers: none,
Port triggering: none,
DMZ enabled, for 192.168.1.108,
UPnP Enabled (about 10 redirects),
Basic security: everything enabled,
Advanced security (left default): DoS Protection disabled,
Local menagment: all,
Remote managment: 0.0.0.0 on port 80,
Parental control: disabled,
Access control rule/host/target/shedule: disabled,
Advanced routing: didn;t touch anything,
Bandwich control: Enabled, Line type: ADSL (512kbps upload, 2048kbps download), 1 rule for 192.168.1.99-192.168.1.100/1-65530/, Egress: Min25/Max312.Ingress:Min25/Max1024 adn Enabled --- But when Bandwich controll was disabled, router also freezed sometimes (usually after 2-3 days of workin),
IP&MAC binding: didn;t touch anything,
Dynamic DNS: No-IP, Enable DDNS: yes, for lunaris.sytes.net domain name,
System Tools:
Time zone: use 1 IP for time server: 212.244.36.227, GMT+2 (we use GMT+1 but when i set it up then it shows wrong hour, there is now time zone for warsaw
After few months, i try new versions, but with same result. Finally i gave back router on a warranty, because i didn;t know there is more people with same problem. I received completely new unit, with newest firmware on polish website "3_13_4". Well after 3 days, same problem. This was moment when i knew problem is not with hardware, but software inside.
Because i was using WRT5GL router from Linksys with DD-WRt inside i try DD-WRT. But it failed in many areas. My another try was Gargoyle (OpenWRT based). It have some problems, but with most problematic ones i deal myself, and it works from 12 days now for me, without freeze or any problem like that!
And here is the informations i would like to share with developers and anyone from support:
Please share version with SSH enabled, so testers can use logread, dmesg, and other utils to find problem, diagnose it, and give you results to help. With those possibilities, i diagnosed my problem with OpenWRT, and made some fixes, i would like to help with TL-WR1043ND too, but i need options to do it, in safe way, and i know it;s possible, it's just Linux.
Maybe there is option to configure syslog somehow, that it will send output on some LAN connected Linux mashine? I can do that then, so the log when router fail will be there.
Or maybe, i can connect some console adapter to an USB and it will work? I think there is many people who can help, but we need tools for that
Thank You, and sorry again that alien like me appear here. I know that it's not nice, but it is only TP-Link support forum that i found. Also i must say i admire this, You guys make something best in all world TP-Link support. Really great work, and thank You for that!
Best Regards, and greetings.
Update: just installed current build of gargoyle, and upnp is fixed, also it;s easy to fix problem with some dnsmasq, so it's almost fine release, just don;t know abour 300Mb problem and DMZ, i'll check it later.