Business Community > Pharos Wireless Bridges > CPE510 - failed to configure WLAN
< Pharos Wireless Bridges

CPE510 - failed to configure WLAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

CPE510 - failed to configure WLAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
CPE510 - failed to configure WLAN
CPE510 - failed to configure WLAN
2017-10-02 23:15:59
Model :

Hardware Version :

Firmware Version :

ISP :

Hi,

i want to configure 2 CPE510, one as a access point and the other one as a client to connect 2 buildings. I used the quick setup as described in the manual but every time i finish the wizard there is the error: "Failed to configure WLAN"





I patched both CPE510 with the current firmware TP_PharOS_2.1.0_170609 but it didn't change anything. The Error occurs on both CPE510.
Is somebody here with an advice for me?

Kind regards,

Tim
  0      
 
  0      
 
#1
Options
3 Reply
Re:CPE510 - failed to configure WLAN
2017-10-13 10:55:20
Hi Tim,

When you configure your CPE510, please use an Ethernet cable to connect your PC and the LAN port of each CPE510.
Now reset them and do it again. Here are the detailed guides:
Configure AP mode: http://www.tp-link.com/en/faq-730.html
Configure Client mode: http://www.tp-link.com/en/faq-727.html
  0  
  0  
#2
Options
Re:CPE510 - failed to configure WLAN
2017-10-27 01:43:52
Tim, I was having the same issue on both of my CPE210 devices. After hours of trying everything I gave in and spent some time with support on the phone. Looks like it is a problem caused by the Firmware update. We downloaded the latest version of the V1 firmware and updated it to both devices. After that I was able to setup the AP and Client without issue and internet is running again without a hitch!
  0  
  0  
#3
Options
Re:CPE510 - failed to configure WLAN
2017-10-27 09:11:11
Thanks DJC, updating firmware sometimes fix unknown problems.
You can try this and update the firmware to TP_Pharos_V2.1.6_170908 http://www.tp-link.com/en/download/CPE510_V2.html#Firmware
CPE and WBS products (except for CPE210 V2.0) share the same firmware, so you don't need to worry about the different hardware version.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 1355

Replies: 3

Related Articles
CPE510 configured to Client mode but no internet
10559 0
TPlink CPE 510 firmware
6022 2
EAP225 serve as Acces point to cpe 510
390 0
CPE510 5GHz mBPS 13DbI oUTDOOR cpe 510
360 0
Failed to configure ICS!
860 0
Failed to configure ICS
2931 0
About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.