Requests & Suggestions
30
VotesSummary: I would like to propose an enhancement to the Omada Hotspot Management system, specifically for the voucher code section. The feature should allow users to customize the template used for pri
By
JBreitfeldt
· Latest post 2025-07-28 07:20:27
by MrAlab
4371Views
27
VotesDuring the login in Omada Controller (Local or Cloud), the 2FA field does not interpret the code correctly when you paste it. If you paste the code or you password manager automatically fill it in, th
By
Hitchhiker
· Latest post 2024-10-31 07:39:29
by Vincent-TP
2398Views
2
VotesWelcome to the Feature Request Board for TP-Link products! This "Requests & Suggestions" (Link) board is to serve as a suggestion box where you can propose ideas for improving TP-Link Business product
By
Fae
Fae3772Views
0
VotesHi! I have upgraded to the latest Omada SDN and discovered that my "supported" (using official link) devices do not have up-to-date firmware. I was running 5.0.5 and 5.0.3 firmwares from 2021 on them.
By
ngrigoriev
· Latest post 8 hours ago
by ngrigoriev
148Views
5
VotesWhen I disable the Site LED setting, the controller LEDs remain on. Is there a way to turn off the controller LEDs?
695Views
0
VotesThe ER7212PC can provide nice fail-over for IPv4 via NAT using multi-WAN setup, but for IPv6 it's not working, as only one of the WANs can be set to provide IPv6 connection to the LAN. Other devices l
By
ivancarlosti
11Views
0
VotesThe new Virtual WAN feature demonstrates that the gateways can handle multiple WANs per port, but the controller will not allow a WAN VLAN ID that is in use by a VLAN. Instead, allow a Virtual WAN to
By
Dr_Marty
27Views
17
VotesEAP773 currently broadcasts a "TP_TX_VAP" SSID when the 6ghz band is active, which is enabled for certain devices with early implementations of WiFi 6E/7. Broadcasting the SSID was employed by several
By
czapp97
· Latest post Saturday
by destinationfawk
2240Views
2
VotesI'm able to schedule a firmware update for all my devices, routers, APs and bridges, but not for the OC200 controller itself. I like to schedule updates early in the AM to reduce office downtime. But
scheduled upgrade
251Views
3
VotesHello, I've Omada software controller (v6.1.0.11), ER8411 v1.0 (1.3.6), SG2210XMP-M2 v1.0 (1.0.18), SX3008F v1.20 (1.20.14) and EAP650(EU) v1.0 (1.1.3). It's very struggling that with this setup I can
96Views