Business Community > Pharos Wireless Bridges > EAP110 wireless compatibility issue)
< Pharos Wireless Bridges

EAP110 wireless compatibility issue)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

EAP110 wireless compatibility issue)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP110 wireless compatibility issue)
EAP110 wireless compatibility issue)
2017-10-07 05:38:46
Model :

Hardware Version :

Firmware Version :

ISP :

Following on from here http://forum.tp-link.com/showthread.php?100353-Gated-Community-Wifi-for-CCTV-and-hotspot - I have run into a really weird issue that I have never seen or heard of before

The last mile connectivity is between EAP110 and a set of Hikvision wireless cameras (2CD2020F-iW)
For some odd reason, the link between EAP110 and the camera just refuses to work as expected.. While the camera does connect to the EAP110, the connection is completely unusable with over 80% packet loss even on ping

What's weird is that the same Hikivision cameras are happy to connect to multiple other access points I tried on my test bed (Netgear R7000/Linksys WRT54G/TP-Link Archer C7/Xiaomi Router) with a stable throughput

Similarly, every other client I tried with the EAP110 seems to work without fuss (surface laptop/Macbook/couple of iphones/android phones and even a Dahua IPC wireless camera)

It's just that the two of them refuse to share a stable connection even when placed next to each other

As a last resort, I tried connecting the Hikvision camera wired to an old TP-Link MR3020 in client mode (connected to the EAP110) and EVEN that works fine!

However the EAP110 and the camera just won't work together - I tried all possible encryption combinations and even an unsecured connection but the two just won't play along

I have a total of 10 cameras and 4 EAP110s lying with me now.
Short of ordering 10X client mode devices and IP66 boxes to house them in harsh outdoor conditions (and the associated wiring paraphernalia) , is there any other thing I should try?
  0      
 
  0      
 
#1
Options
11 Reply
Re:EAP110 wireless compatibility issue)
2017-10-07 07:00:19
Strange. Since you tracked down the odd behavior with the Hikvision camera to the EAP110-Outdoor already, I suggest that you open a ticket at TP-Link's tech support. You could also contact Bob from TP-Link Tech Support Team by PM, who did post in the GC-Wifi-for-CCTV-and-hotspot thread, too (see post #7).
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#2
Options
Re:EAP110 wireless compatibility issue)
2017-10-07 14:31:15

R1D2 wrote

Strange. Since you tracked down the odd behavior with the Hikvision camera to the EAP110-Outdoor already, I suggest that you open a ticket at TP-Link's tech support. You could also contact Bob from TP-Link Tech Support Team by PM, who did post in the GC-Wifi-for-CCTV-and-hotspot thread, too (see post #7).


Ok.. Dropped a PM to Bob and opened a ticket at TP Link support
Here is a screenshot from the EAP if it helps

The 1st client is a TPLink MR3020 in client mode (Notice the Data rate)
The 2nd client is the Hikvision camera (Data Rate - 0)


  0  
  0  
#3
Options
Re:EAP110 wireless compatibility issue)
2017-10-07 14:41:52
It appears the issue is with the WMM settings in QoS on the EAP
By disabling WMM, the data rate has gone up to 54mbps

Will post back after testing

Edit: it was indeed an issue with the QoS (which for some odd reason is enabled by default)
Disabling the QoS has resolved the issue
  0  
  0  
#4
Options
Re:EAP110 wireless compatibility issue)
2017-10-07 19:12:18

superczar wrote

It appears the issue is with the WMM settings in QoS on the EAP
By disabling WMM, the data rate has gone up to 54mbps

Will post back after testing

Edit: it was indeed an issue with the QoS (which for some odd reason is enabled by default)


Disabling the QoS has resolved the issue


Ok - Not really a solution..
I confused WMM with QoS
While disabling WMM fixed the connectivity issue, it also limits the EAP110 to 802.11g only

There seems to be a serious bug with the EAP110 firmware then as the camera plays fine with both a netgear r7000 and a Archer C7 with WMM enabled
However the data rate drops to zero the moment I enable WMM on the EAP110 :(

With WMM enabled on EAP110




With WMM disabled on EAP110


  0  
  0  
#5
Options
Re:EAP110 wireless compatibility issue)
2017-10-08 16:39:32

superczar wrote


I confused WMM with QoS


WMM is indeed a sort of QoS for wireless frames (IEEE802.11e).


There seems to be a serious bug with the EAP110 firmware then as the camera plays fine with both a netgear r7000 and a Archer C7 with WMM enabled
However the data rate drops to zero the moment I enable WMM on the EAP110 :(


Could indeed be a bug if the cam works with Archer's WMM mode. What's more, I wonder why fixed 802.11n mode requires WMM (should not require it IMHO).

Let's see what TP-Link Tech Support finds out.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#6
Options
Re:EAP110 wireless compatibility issue)
2017-10-29 05:21:57

R1D2 wrote

WMM is indeed a sort of QoS for wireless frames (IEEE802.11e).



Could indeed be a bug if the cam works with Archer's WMM mode. What's more, I wonder why fixed 802.11n mode requires WMM (should not require it IMHO).

Let's see what TP-Link Tech Support finds out.


No response from TP-Link Tech Support as yet.
It would be worth updating that the same cameras work fine with the CPE210 as well with no need to disable WMM.
The connection is at a solid 150mbps (max limit on the camera wireless card) even over 50M away with the CPE210 ..

Sadly, no such luck with the EAP110 ... I now wish I would have got a bunch of CPE210 instead of the EAPs :(
  0  
  0  
#7
Options
Re:EAP110 wireless compatibility issue)
2017-10-29 17:03:28
CPE210 does not cover 360° area, I would not recommend it for omnidirectional coverage. The WBS210 with TL-ANT2410MO would be a suitable replacement, but I couldn't manage to get hands on such an antenna yet. It is still announced as "coming soon to an airport near you" here in Germany. :)

Did you open a ticket with TP-Link support? No reply from Bob?
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#8
Options
Re:EAP110 wireless compatibility issue)
2017-10-29 22:18:16

R1D2 wrote

CPE210 does not cover 360° area, I would not recommend it for omnidirectional coverage. The WBS210 with TL-ANT2410MO would be a suitable replacement, but I couldn't manage to get hands on such an antenna yet. It is still announced as "coming soon to an airport near you" here in Germany. :)

Did you open a ticket with TP-Link support? No reply from Bob?


Yeah, that's the unfortunate part
However the performance difference between the two is huge which is a bit surprising

FWIW, here is the current layout- The CPE210 points inwards from the entrance gate
File:
Layout.jpgDownload
  0  
  0  
#9
Options
Re:EAP110 wireless compatibility issue)
2017-10-30 00:23:00
You mean the performance difference between 802.11g and 802.11n? Yes, it's something like 54 Mbit/s versus 150 Mbit/s wireless speed @20 MHz channel width. The CPE510 can perform up to 300 Mbit/s wireless speed @40 MHz channel width. Since usually one uses this channel width in 5 GHz band only, the CPE510 will always outperform any 2.4 GHz device, even the CPE210.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#10
Options
Re:EAP110 wireless compatibility issue)
2017-10-30 00:45:50

R1D2 wrote

You mean the performance difference between 802.11g and 802.11n? Yes, it's something like 54 Mbit/s versus 150 Mbit/s wireless speed @20 MHz channel width. The CPE510 can perform up to 300 Mbit/s wireless speed @40 MHz channel width. Since usually one uses this channel width in 5 GHz band only, the CPE510 will always outperform any 2.4 GHz device, even the CPE210.


Oh yes - the 510s are a class apart.
The first pair is working at a consistent 20 mbps in and 15 mbps out without dropping a sweat over the last 1 week

As for the 2.4 Ghz band, What I meant was the dbm strength at similar distances from the 220 vs the 110
Given the fairly high noise floor in that band, the 220 outperforms the 110 by miles - (although I guess the directional nature of the antenna helps the 220)
  0  
  0  
#11
Options
12

Information

Helpful: 0

Views: 3432

Replies: 11

Related Articles
EAP110-OUTDOOR compatibility with AV600
388 0
POE Compatibility between SG2008P and EAP110
650 0
Wifi compatibility between 1 EAP110 and 2 CPE210
1547 0
EAP110-Outdoor Signal Issue
671 0
TL-SG2210MP JetStream POE Switch & EAP110 Compatibility
310 0
 EAP110-Outdoor & Deco P9 compatibility
464 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.