Trying to configure vlans and need some help
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Trying to configure vlans and need some help
Model :
Hardware Version :
Firmware Version :
ISP :
I just received my two TL-SG105E switches and now i need to configure them but i am new to vlan configs. Here is my config i need and i hope someone can give me a hand with the switch setup.
TL-SG105E A port 1 connects to TL-SG105E B port 1
TL-SG105E A port 5 has a AP (Unifi AC Pro)
TL-SG105E B port 5 has a AP (Unifi AC Pro)
TL-SG105E B port 4 connects to pfsense LAN
On my APs i created two WIFI SSID's
SSID: TESTvlan46 with tagged with vlan 46
SSID: TESTvlan50 with tagged with vlan 46
SSID: TEST no vlan tag
on pfsense router i have one LAN adapter configured with virtual adapters
SSID: TESTvlan46 connects to 192.168.1.2 (DHCP 192.168.1.x)
SSID: TESTvlan50 connects to 192.168.2.2 (DHCP 192.168.2.x)
SSID: TEST (no vlan) connects to 192.168.0.2 (DHCP 192.168.0.x)
The part i don't understand is how the switch's will handle when the ap's are sending data tagged with vlan 46, 50 or no vlan and how the switch's can keep this flowing to the router.
Hardware Version :
Firmware Version :
ISP :
I just received my two TL-SG105E switches and now i need to configure them but i am new to vlan configs. Here is my config i need and i hope someone can give me a hand with the switch setup.
TL-SG105E A port 1 connects to TL-SG105E B port 1
TL-SG105E A port 5 has a AP (Unifi AC Pro)
TL-SG105E B port 5 has a AP (Unifi AC Pro)
TL-SG105E B port 4 connects to pfsense LAN
On my APs i created two WIFI SSID's
SSID: TESTvlan46 with tagged with vlan 46
SSID: TESTvlan50 with tagged with vlan 46
SSID: TEST no vlan tag
on pfsense router i have one LAN adapter configured with virtual adapters
SSID: TESTvlan46 connects to 192.168.1.2 (DHCP 192.168.1.x)
SSID: TESTvlan50 connects to 192.168.2.2 (DHCP 192.168.2.x)
SSID: TEST (no vlan) connects to 192.168.0.2 (DHCP 192.168.0.x)
The part i don't understand is how the switch's will handle when the ap's are sending data tagged with vlan 46, 50 or no vlan and how the switch's can keep this flowing to the router.