T2600G-28MPS create 2 tagged vlans
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
T2600G-28MPS create 2 tagged vlans
Model :
Hardware Version :
Firmware Version :
ISP :
Hello,
I'm trying to create vlans with 2 x T2600G switches. Here are the requirements to the network:
The 2 switches are connected together on Port 24
On Ports 1 - 8 on both Switches I want to create a VLAN called VOIP for my Phones. They get the IP Adress over DHCP from a Fritz box connected to the first Switch on Port 8. (192.168.137.x)
On Ports 9 - 23 on both Switches I want to create a vlan for my PCs and Servers called NETWORK. They get the IP Adress over DHCP from a Router connected to port 23. (192.168.1.x)
I tried the following configuration but it didn't work. I created the VLAN VOIP with port 1 - 8 on both switches. The default System-VLAN is port 9-24 on both switches. Then I defined port 24 as trunk on both switches but on the second switch I get IP Adresses (192.168.1.x) on Port 1 -8 instead of (192.168.137.x).
Has somebody an idea or description how to configure the vlans correct.
Thanks in advance.
Hardware Version :
Firmware Version :
ISP :
Hello,
I'm trying to create vlans with 2 x T2600G switches. Here are the requirements to the network:
The 2 switches are connected together on Port 24
On Ports 1 - 8 on both Switches I want to create a VLAN called VOIP for my Phones. They get the IP Adress over DHCP from a Fritz box connected to the first Switch on Port 8. (192.168.137.x)
On Ports 9 - 23 on both Switches I want to create a vlan for my PCs and Servers called NETWORK. They get the IP Adress over DHCP from a Router connected to port 23. (192.168.1.x)
I tried the following configuration but it didn't work. I created the VLAN VOIP with port 1 - 8 on both switches. The default System-VLAN is port 9-24 on both switches. Then I defined port 24 as trunk on both switches but on the second switch I get IP Adresses (192.168.1.x) on Port 1 -8 instead of (192.168.137.x).
Has somebody an idea or description how to configure the vlans correct.
Thanks in advance.