Business Community > Pharos Wireless Bridges > Model CPE220/210 Everyday will be DC
< Pharos Wireless Bridges

Model CPE220/210 Everyday will be DC

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Model CPE220/210 Everyday will be DC

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Model CPE220/210 Everyday will be DC
Model CPE220/210 Everyday will be DC
2017-11-27 13:19:17
Model :

Hardware Version :

Firmware Version :

ISP :

Model CPE220/210
Hardware Version CPE210 V1 / CPE220 V2
Firmware version V2
Mode : AP b/g/n
Cw : 20/40 and 10mhz

Case 1

AP : Cpe210
All Client : CPE210/CPE220 total 10 Client
Maxtream : ON

Problem :
Everyday AP will be DC with all client..
after rebooting all seems normal again


Case 2
AP : CPE210
All Client : All orher brand total 10 Client

Problem :
Everyday AP will be DC with all client..
after rebooting all seems normal again..

I start to headache facing this problem
Any solution..?

Please help

Thanks
Regards
  0      
 
  0      
 
#1
Options
6 Reply
Re:Model CPE220/210 Everyday will be DC
2017-11-27 16:13:15
My CPE210 V1 and V2 and CPE210 v1 and v2 also DC after sometime conected..almost everyday this happen
Mode : AP b/g/n
Maxtream : On and Off also same condition ( DC almost every day )
i have a lot of this device but only in AP mode this will happen
  0  
  0  
#2
Options
Re:Model CPE220/210 Everyday will be DC
2017-11-28 13:43:37
1. DC means disconnection?
2. You said rebooting will solve this problem, do you reboot the AP or AP an 10 clients?
3. Besides the 11 CPEs in the network, do you have any other devices connected to the clients?
4. Have this happened before?

1. Update them to the latest will improve the stability. For CPE210 V1 and CPEV220, please all update to TP_Pharos_V2.1.6_170908
2. There could be heavy wireless interference in the environment since you mentioned you tried other band Clients. Do Spectrum analysis and choose a rather clean channel. You can either perform a spectrum analysis with the build-in tool of Pharos AP or a professional software inSSIDer
  0  
  0  
#3
Options
Re:Model CPE220/210 Everyday will be DC
2017-11-28 14:53:20
Hi Heri

Your question looks a lot like the one we fixed recently.

And I see your comment in that post.

You can download the beta firmware from the link directly, because the WBS510, CPE220 and CPE210v1 can use the same firmware.

Only CPE210V2 in Pharos products has its own firmware.
Other model can use the same firmware.

Please feel free to let me know if your problem can be solved.
  0  
  0  
#4
Options
Re:Model CPE220/210 Everyday will be DC
2017-11-28 16:13:24

Carat1 wrote

1. DC means disconnection?
2. You said rebooting will solve this problem, do you reboot the AP or AP an 10 clients?
3. Besides the 11 CPEs in the network, do you have any other devices connected to the clients?
4. Have this happened before?

1. Update them to the latest will improve the stability. For CPE210 V1 and CPEV220, please all update to TP_Pharos_V2.1.6_170908
2. There could be heavy wireless interference in the environment since you mentioned you tried other band Clients. Do Spectrum analysis and choose a rather clean channel. You can either perform a spectrum analysis with the build-in tool of Pharos AP or a professional software inSSIDer



1. DC mean disconect
2. Rebooting only AP
3. yes i have another Ap ( Ubnt and mikrotik ) but they seems Ok and keep conected with client without any problem at all
4. yes Actually..but at that time..Tp link didnt respons my problem

before i put my problem in this forum..all Firmware was updated based lates firmware from tplink website
and the problem still accur...
  0  
  0  
#5
Options
Re:Model CPE220/210 Everyday will be DC
2017-11-28 16:15:19

tplink_smb wrote

Hi Heri

Your question looks a lot like the one we fixed recently.

And I see your comment in that post.

You can download the beta firmware from the link directly, because the WBS510, CPE220 and CPE210v1 can use the same firmware.

Only CPE210V2 in Pharos products has its own firmware.
Other model can use the same firmware.

Please feel free to let me know if your problem can be solved.


Thank You admin
I will try to update with beta firmware first...and i will let you know the result
Just to make sure...is it the file in the link below..?

[COLOR=#333333][COLOR=#333333]http://static.tp-link.com/WBS510(UN)_2.0-up-ver2-1-7-P4[20171026-rel70717].rar
  0  
  0  
#6
Options
Re:Model CPE220/210 Everyday will be DC
2017-11-29 21:54:06

tplink_smb wrote

Hi Heri

Your question looks a lot like the one we fixed recently.

And I see your comment in that post.

You can download the beta firmware from the link directly, because the WBS510, CPE220 and CPE210v1 can use the same firmware.

Only CPE210V2 in Pharos products has its own firmware.
Other model can use the same firmware.

Please feel free to let me know if your problem can be solved.



Hello Admin
I just try this firmware for Cpe210 hardware V1
and the result is all client can't conect at all...all of them dissconect
since i have 11 client on this Ap i can't test any longer
then i downgrade again to latest firmware on web...
if you need screenshot i will send you by email..
please send me your email..

regards
  0  
  0  
#7
Options

Information

Helpful: 0

Views: 2352

Replies: 6

Related Articles
 CPE 210 or CPE 220? Advice please.
8350 0
 cpe220
673 0
Correct Mode of operation for CPE220
2062 0
Series connection of 2 CPE220's
598 1
 LAN1 on CPE220
397 0
 CPE510 often dc
2627 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.