TP-Link TL-SG1008PE limited to 100 MBit/s

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TP-Link TL-SG1008PE limited to 100 MBit/s

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP-Link TL-SG1008PE limited to 100 MBit/s
TP-Link TL-SG1008PE limited to 100 MBit/s
2017-12-09 16:02:15
Model :

Hardware Version :

Firmware Version :

ISP :

Hi,

I have installed a TL-ST1008PE, it works fine so far. Only problem is, that the bandwith is limited to 100 MBit/s at each port. If I connected my PC directly to the modem I got 400 MBit/s, if I use the switch in between the bandwith is limited. Is there anything I can do?

Thanks
pewe
  0      
  0      
#1
Options
1 Reply
Re:TP-Link TL-SG1008PE limited to 100 MBit/s
2017-12-10 00:16:55
The TL-SG1008PE is a Gigabit switch. If auto-negotiation sets the ports to 100 Mbit/s mode, it is almost certainly caused by a bad cable, e.g. by using UTP cables instead of S/FTP cables.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#2
Options