T2600G-28TS Doesn't show diagnostic information (DDM) from SM311LM

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

T2600G-28TS Doesn't show diagnostic information (DDM) from SM311LM

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
T2600G-28TS Doesn't show diagnostic information (DDM) from SM311LM
T2600G-28TS Doesn't show diagnostic information (DDM) from SM311LM
2018-01-02 01:53:03
Model :

Hardware Version :

Firmware Version :

ISP :

Issues: Failed to get DDM status from SM311LM module

TP-LINK Model: T2600G-28TS V 2.0
Firmware Version: 2.0.0 Build 20170928 Rel.34921(s)
Bootloader: Version: TP-LINK BOOTUTIL(v1.0.0)

TP-LINK SFP Model: SM311LM V 3.0


1. I insert n. 2 SFP modules respectively in ports 27 and 28, and both link are working correctly
2. Enabled DDM under Switching, DDM
3. Under
Switching, DDM, DDM Status report no informations (ports 25 thru 28).
4. I get out one SFP module and I put it into a microtik switch, here I can get SFP diagnostics informations (Model, capability, RxPower, TxPower ....).


What's wrong?

In this application it is really important for us to get Fiber optic diagnostics and setup alarms to idetify fiber optic link prefailure.

Thank you so much.





  0      
  0      
#1
Options
1 Reply
Re:T2600G-28TS Doesn't show diagnostic information (DDM) from SM311LM
2018-01-08 09:33:27

spikesystem wrote

Model :


ISP :

Issues: Failed to get DDM status from SM311LM module

TP-LINK Model: T2600G-28TS V 2.0
Firmware Version: 2.0.0 Build 20170928 Rel.34921(s)
Bootloader: Version: TP-LINK BOOTUTIL(v1.0.0)

TP-LINK SFP Model: SM311LM V 3.0


1. I insert n. 2 SFP modules respectively in ports 27 and 28, and both link are working correctly
2. Enabled DDM under Switching, DDM
3. Under
Switching, DDM, DDM Status report no informations (ports 25 thru 28).
4. I get out one SFP module and I put it into a microtik switch, here I can get SFP diagnostics informations (Model, capability, RxPower, TxPower ....).


What's wrong?

In this application it is really important for us to get Fiber optic diagnostics and setup alarms to idetify fiber optic link prefailure.

Thank you so much.




In my opinion, TL-SM311LM do not support DDM function, even though you configured DDM function in T2600G-28TS, you will not check any parameter about SFP and fiber
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 940

Replies: 1