T1500-28PCT POE Issue with AC1200

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

T1500-28PCT POE Issue with AC1200

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
T1500-28PCT POE Issue with AC1200
T1500-28PCT POE Issue with AC1200
2018-01-31 21:27:15
Model :

Hardware Version :

Firmware Version :

ISP :

I'm looking at an issue for a friend he has a T1500-28PCT with a AC1200 access point connected using POE to power it, this was working fine until the other day when the power tripped in his house, since then the WiFi from the AP is intermittent, we noticed that he gets a status of "Connected with Errors" on his TV.

I was investigating last night and discovered that if I plug an external power adapter into the AP then it works normally again. Does anyone have any ideas on what might be causing this, he told me that the switch has not been configured in any way so I pressed and held the button on the front until it rebooted which I presume was a factory reset, this made no difference.

Thanks in Advance

Jon
  0      
  0      
#1
Options
3 Reply
Re:T1500-28PCT POE Issue with AC1200
2018-02-01 15:54:05

Advocas wrote



I'm looking at an issue for a friend he has a T1500-28PCT with a AC1200 access point connected using POE to power it, this was working fine until the other day when the power tripped in his house, since then the WiFi from the AP is intermittent, we noticed that he gets a status of "Connected with Errors" on his TV.

I was investigating last night and discovered that if I plug an external power adapter into the AP then it works normally again. Does anyone have any ideas on what might be causing this, he told me that the switch has not been configured in any way so I pressed and held the button on the front until it rebooted which I presume was a factory reset, this made no difference.

Thanks in Advance

Jon


I suggest you go to the web interface of T1500-28PCT, In the poe option, you can find the status of this AC1200 AP. You can connect this AP to different port do the test also.
  0  
  0  
#2
Options
Re:T1500-28PCT POE Issue with AC1200
2018-02-05 22:27:36
I did try on several ports they all gave the same result, I will look at the Web interface when I go back later in the week.
  0  
  0  
#3
Options
Re:T1500-28PCT POE Issue with AC1200
2018-02-28 04:42:20
1. How is the AC1200 AP connected to the T5100-28PCT? Is it a premade cable to was it fabricated in the field? Has it been checked to insure that it is wired correctly?
2. Can you determine the power requirements of the AC1200 AP?
3. What power is the T5100-28PCT capable of providing to each port?
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 890

Replies: 3

Related Articles