Model : CPE210

Hardware Version :

Firmware Version : 2.1.11 Build 20180117 Rel. 69037 (4555)

ISP : n/a

Hi,

I'd really appreciate some help. I've installed two CPE210 v2 's, one on a boat and the other 20m away on a building. There is a completely clear line of sight between the two devices and they are both at approximately the same height. The link seems to be intermittent from a users perspective, i.e. iPlayer/NowTV buffers a lot. This is a new installation so it's never worked as expected.

At the building end there is a BT Business Smart Hub and a Raspberry Pi for testing. At the boat end there is a Linux server with Plex on it, some TVs, a printer and WiFi access point (for a laptop to get internet) all wired into a switch.

The two CPE210's where configured by the reseller for me but they look pretty much with default settings. Based on research from the forums to troubleshooting I've changed the mode to N only, dropped the max TX rate to MC5, reduced the transmit power to 0 and set the distance setting to 0.1. The channel/frequency is set to auto so I haven't bothered using the spectrum analysis and manually configuring the channel/frequency.

I'll add some screenshots in case they are helpful. I really appreciate the help. Thanks.

Regards.