Connection lost with Pharos WBS210

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Connection lost with Pharos WBS210

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Connection lost with Pharos WBS210
Connection lost with Pharos WBS210
2018-05-04 15:02:40
Model :

Hardware Version :

Firmware Version :

ISP :

Hello everyone,

Sorry for my english, i'll try my best.
I have a strange problem using a Pharos WBS210 as a repeater.
When WBS210 is booted, it works perfect, the four signal leds are ok and TX and RX > 100Mb.

It works very well for some hours, and then connection with the AP is suddenly lost and never comes back.
The only way is to reboot the repeater and then it immediatly works again.
I've already upgraded to the last firmware. Any ideas?


Thanks for your help.

Julien
  0      
  0      
#1
Options
9 Reply
Re:Connection lost with Pharos WBS210
2018-05-05 23:08:17
I have the same problem.
WBS210 v1.2 mode Access Point.
last firmware v2.1.6
  0  
  0  
#2
Options
Re:Connection lost with Pharos WBS210
2018-05-06 16:24:37

asepsunara wrote

I have the same problem.
WBS210 v1.2 mode Access Point.
last firmware v2.1.6


Latest firmware for HW v1.x is Pharos v2.1.12. If not available on your country's support site, use the firmware image for CPE510, it's the same image as for WBS.

V2.1.12 also includes fixes from beta v2.1.7, see http://forum.tp-link.com/showthread.php?101999-WBS510_V2_171026_Beta-Fix-the-problem-that-WBS510-as-AP-will-disconnect-with-all-stations-after-running-for-a-while
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#3
Options
Re:Connection lost with Pharos WBS210
2018-05-08 13:28:27

R1D2 wrote

Latest firmware for HW v1.x is Pharos v2.1.12. If not available on your country's support site, use the firmware image for CPE510, it's the same image as for WBS.

V2.1.12 also includes fixes from beta v2.1.7, see http://forum.tp-link.com/showthread.php?101999-WBS510_V2_171026_Beta-Fix-the-problem-that-WBS510-as-AP-will-disconnect-with-all-stations-after-running-for-a-while


thanks R1D2.
  0  
  0  
#4
Options
Re:Connection lost with Pharos WBS210
2018-05-08 18:29:01

asepsunara wrote

thanks R1D2.


You're welcome. Did the latest firmware solve the problem with disconnects?
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#5
Options
Re:Connection lost with Pharos WBS210
2018-05-14 16:30:44
Thanks for your advice. I can't find the last firmware v2.1.12, do you have a direct link to download it?
  0  
  0  
#6
Options
Re:Connection lost with Pharos WBS210
2018-05-15 17:41:28

Julien wrote

Thanks for your advice. I can't find the last firmware v2.1.12, do you have a direct link to download it?


https://static.tp-link.com/2018/201803/20180307/WBS210(UN)_v2.0_20180202.zip
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#7
Options
Re:Connection lost with Pharos WBS210
2018-05-16 14:47:14
Thanks for all R1D2.

I've already tried v2.1.7 beta a few days ago, and all seems to be fine now, no more disconnects. Do i still need to upgrade to v2.1.12?
  0  
  0  
#8
Options
Re:Connection lost with Pharos WBS210
2018-05-17 08:52:47

Julien wrote

Thanks for all R1D2.

I've already tried v2.1.7 beta a few days ago, and all seems to be fine now, no more disconnects. Do i still need to upgrade to v2.1.12?


Glad to hear this. No, you don't need to upgrade to v2.1.12 if you experience no bugs. But if you want to upgrade, it won't harm either. Later versions always include fixes applied to previous versions.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#9
Options
Re:Connection lost with Pharos WBS210
2018-06-02 02:39:36

R1D2 wrote

Glad to hear this. No, you don't need to upgrade to v2.1.12 if you experience no bugs. But if you want to upgrade, it won't harm either. Later versions always include fixes applied to previous versions.


Yup.. I agree.. You dont need to upgrade..
  0  
  0  
#10
Options