tpNMS Switch Configuration Backup not working
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
tpNMS Switch Configuration Backup not working
Model :
Hardware Version :
Firmware Version :
ISP :
Dear All, I used tpNMS software application to managing our network switches (T1600G-52TS/PS and TL-SG3424P's). The monitoring part working well but I cannot make a configuration backup. I've got the "Telnet login fail." error message. Of course the telnet client is installed on the management computer (Windows 10) and all of neccessary configuration on the switch (SNMP and Telnet) is done. Currently I use tpNMS V1.0.4. Does anybody have experience with this? Best Regards, Bela Vajda
Hardware Version :
Firmware Version :
ISP :
Dear All, I used tpNMS software application to managing our network switches (T1600G-52TS/PS and TL-SG3424P's). The monitoring part working well but I cannot make a configuration backup. I've got the "Telnet login fail." error message. Of course the telnet client is installed on the management computer (Windows 10) and all of neccessary configuration on the switch (SNMP and Telnet) is done. Currently I use tpNMS V1.0.4. Does anybody have experience with this? Best Regards, Bela Vajda