Business Community > Pharos Wireless Bridges > CPE510 causing Network loops?
< Pharos Wireless Bridges

CPE510 causing Network loops?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

CPE510 causing Network loops?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
CPE510 causing Network loops?
CPE510 causing Network loops?
2018-08-08 15:13:11

I am using 2 CPE510's to extend a LAN to a remote site. At least once a day the far end is not reachable, and the switches are acting like there is a loop in the network. The upstream devices are not effected, but the down stream devices are seeing the MAC addresses being advertised back from the CPE510.

 

Anyone else have this issue and have fixed it? This started after I put these devices in. There are no logs in the TP-Link devices.  

  0      
 
  0      
 
#1
Options
1 Reply
Re:CPE510 causing Network loops?
2018-08-09 11:47:43

dpoppleton wrote

Anyone else have this issue and have fixed it? This started after I put these devices in. There are no logs in the TP-Link devices.  

 

Never did experience this.

 

What is your network topology? Which operation mode did you select for the CPE510? How is it connected to the network? How is it configured (WiFi, Network)? What's the usage pattern of your clients? What's the routing policy of both connected networks?

 

Lots of questions. Without detailed info it's impossible to help.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 591

Replies: 1

About Us
Press
Copyright © TP-Link Corporation Limited. All rights reserved.