CPE220 Want to see user MAC Address in Mikrotik

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
CPE220 Want to see user MAC Address in Mikrotik
CPE220 Want to see user MAC Address in Mikrotik
2018-10-01 14:20:26 - last edited 2018-10-06 20:48:58

DIAGRAM:

Internet > Mikrotik RB951 > TP-Link CPE220 > Hotspot

 

pc1 mac=18:89:5B:7E:3F:07

Mikrotik ip: 10.0.x.x

TPLink ip: 192.168.x.x

Mikrotik connect through Ethernet to TPLink

pc1 connect through Hotspot

 

PROBLEMS:

1. Currently with AP Router mode in TPLink. I can't see my pc MAC address in Mikrotik

Which mode should I choose in Operation Mode so that I can see my pc1 MAC address in Mikrotik

 

tq

 

 

0
0
#1
Options
1 Accepted Solution
Re: CPE220 Want to see user MAC Address in Mikrotik-Solution
2018-10-03 11:42:15 - last edited 2018-10-06 20:48:58

nbctcp wrote

PROBLEMS:

1. Currently with AP Router mode in TPLink. I can't see my pc MAC address in Mikrotik

Which mode should I choose in Operation Mode so that I can see my pc1 MAC address in Mikrotik

 

A MAC address of a device is an unique identifier assigned to a network interface controller (NIC) for communications at the data link layer of a network segment. In order to "see" MAC addresses the device you "look" for the MAC needs to be in the same network as the device being looked for.

 

Thus, you see MACs of devices conected to the AP only in pure AP mode or in Bridge/Repeater modes with WDS enabled, but not in AP Router mode.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
Recommended Solution
0
0
#2
Options
1 Reply
Re: CPE220 Want to see user MAC Address in Mikrotik-Solution
2018-10-03 11:42:15 - last edited 2018-10-06 20:48:58

nbctcp wrote

PROBLEMS:

1. Currently with AP Router mode in TPLink. I can't see my pc MAC address in Mikrotik

Which mode should I choose in Operation Mode so that I can see my pc1 MAC address in Mikrotik

 

A MAC address of a device is an unique identifier assigned to a network interface controller (NIC) for communications at the data link layer of a network segment. In order to "see" MAC addresses the device you "look" for the MAC needs to be in the same network as the device being looked for.

 

Thus, you see MACs of devices conected to the AP only in pure AP mode or in Bridge/Repeater modes with WDS enabled, but not in AP Router mode.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
Recommended Solution
0
0
#2
Options