KVM wrote

Buenas tardes a todos, les comento que tengo un tema, es la primer ves que me encuentro configurando una Swith capa 2, cree dos Vlan

Vlan1. 192.168.0.x /24 Ports 1 to 20 Untagged Ports
Vlan10 192.168.10.x /24 ports 21 to 24 (CCTV)  Untagged Port

 

El problema es necesito que algunos equipos de la Vlan1 puedan acceder a un equipo en la Vlan2.

Probé creando ACLs, por MAC, por IP y no me funciona. Es correcto que lo realice con ACL?..

 

Desde ya agradesco su colaboracion.

Saludos

 

Hi KVM

If you don't mind, please use English to post your content, maybe more people can understand what you mean and reply you.

I use google to translate your post. If you want VLAN 1 can access VLAN 2, you need to configure the layer 3 interface for VLAN 2 and set up the IP address. Then you can achieve inter-VLAN routing and VLAN 1 can access VLAN 2.  

Hi, I was able to configure the Switch with the Vlans. From VLAN 1 (192.168.0.X) the ping responds to 192.168.10.220.

The problem is when I want to access the IP 192.168.10.220 I open the Web Switch page and not the NVR
How should I set up to open the NVR website?
From already thank you very much.

KVM wrote

 

Hi, I was able to configure the Switch with the Vlans. From VLAN 1 (192.168.0.X) the ping responds to 192.168.10.220.

The problem is when I want to access the IP 192.168.10.220 I open the Web Switch page and not the NVR
How should I set up to open the NVR website?
From already thank you very much.

Hi KVM

Make sure that 192.168.10.220 is your NVR's IP address and it's not your switch's IP address. And make sure that your NVR opens the web server.