Dhcp server AC500

Dhcp server AC500
Dhcp server AC500
2019-06-25 13:24:28 - last edited 2019-06-26 01:54:29
Model: AC500
Hardware Version: V1
Firmware Version:

Goodmorning everyone,
I installed 26 cap 1750 with AC500. everything works great but I can't configure the dhcp server for more than 254 clients.
how can I configure the AC500 to overcome this obstacle?
thank you all for your attention

0
0
#1
Options
3 Replies
Re:Dhcp server AC500
2019-06-26 06:56:33

When setting up DHCP Server, we need to set up the interface.

I suggest you set up a new interface and change the subnet mask to 255.255.254.0 in the interface, so that we can set the address pool 192.168.2.1 to 192.168.3.254.

I'm just giving you an example of something you can try.:)

 

 

1
1
#2
Options
Re:Re:Dhcp server AC500
2019-06-26 07:59:37

good morning and thanks for the reply,

I currently have a GB1 interface (192.168.1.100 255.255.0.0) with dhcp server (192.168.1.2 -> 192.168.1.254) Gateway 192.168.1.1 and it works perfectly.

yesterday I tried to set up a new GB2 interface (192.168.2.2 255.255.0.0) with dhcp server (192.168.2.3 -> 192.168.2.254) Gateway 192.168.1.1 on a new Vlan on ports 3-4.

I assigned a part of the access points to this Vlan.

the result is that, on the GB2 the devices (notebook, smartphone etc ..) receive dhcp but ES: 192.168.2.56 gateway 192.168.1.1 but they are not connected to the internet.

I didn't understand how to get the internet on GB2.

Can you give me some suggestions?

Thanks a lot to everyone

0
0
#3
Options
Re:Re:Re:Dhcp server AC500
2019-06-27 09:38:17

I'm not quite sure what your topology looks like, but I found an FAQ on the official website of tp-link, and maybe this article is helpful to you.

https://www.tp-link.com/en/support/faq/1344/

0
0
#4
Options