@PBANA  I do not know if you have solved the problem yet, but there are a few thing you have to do with each device in order to have your wireless working properly.

Because the EAPs you have can support multi SSIDs you can configure both with the two SIDs you want. for your WiFi. i dony know how extenside your networking knowledge is, but here are a couple things you can start with. You may also want to reset all the equiptment to factory defaults, and start from scratch. Configure router then switch then EAPs.

Take a look at this guide for the router and switch:

https://www.tp-link.com/us/support/faq/2246/

And this guide for the EAPs using the Omada controller for windows:

https://www.tp-link.com/us/support/faq/1365/

The kowladge base here in the community is a great place to start. There are lots of guides on configuration.

Good Luck!