CPE510 Injector/POE question

CPE510 Injector/POE question
CPE510 Injector/POE question
2019-10-23 13:50:34
Model: CPE510
Hardware Version: V3
Firmware Version:

Possibly buying a CPE510. I have a location that has a POE (802.3af) switch (4 port) mounted. I was thinking about running a cat5 off that POE switch to the injector then connect on to the CPE510. The injector doesn't request power so it should work? Am I missing anything with this thinking? I understand what the purpose of the injector is, to supply passive poe at 24v, i need 48v for the cameras also and do not have any ethernet already existing to the outside of house that I could use only with injector. 

 

Thanks for any input/ideas. 

0
0
#1
Options
1 Reply
Re:CPE510 Injector/POE question
2019-10-23 18:26:27 - last edited 2019-10-23 18:26:56

 

jcorbin wrote

Possibly buying a CPE510. I have a location that has a POE (802.3af) switch (4 port) mounted. I was thinking about running a cat5 off that POE switch to the injector then connect on to the CPE510. The injector doesn't request power so it should work?

 

If the switch is true 802.3af (auto-sensing PoE devices), it should work. Yes, the injector doesn't request power. For connections see the CPE510 installation guide:

 

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
0
0
#2
Options