Business Community > General Discussion > Can't connect CPEs to Pharos Controller
< General Discussion

Can't connect CPEs to Pharos Controller

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Can't connect CPEs to Pharos Controller

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can't connect CPEs to Pharos Controller
Can't connect CPEs to Pharos Controller
2020-01-11 12:59:30 - last edited 2020-01-12 15:57:43
Model: AC50  
Hardware Version:
Firmware Version:

My Pharos Controller / Server can discover and add my CPE210, but the problem is i can't manage it remotely using pharos controller.
Is there something wrong on this configuration/topology?

Router -> EAP110-Outdoor -> CPE210

Router -> PharosController

EAP110-Outdoor
192.168.1.4
SSH/Port 22: Enable 

 

CPE210
Mode: AP Client Router 

Wan IP: 192.168.1.10
Lan IP / DHCP: 10.0.1.1

SSH/Port 22: Enable
Remote Manage: Enable

Router

IP: 192.168.1.1


PharosController
IP: 192.168.1.20

 

Let me know what should the best thing to do in this configuration.

 

  0      
 
  0      
 
#1
Options
9 Reply
Re:Can't connect CPEs to Pharos Controller
2020-01-12 10:54:37 - last edited 2020-01-12 10:56:49

@Heujenthro, works for me.

 

I can only guess since you omitted the most important information: what mode is the CPE running in? AP Client Router mode?

 

If so, you probably forgot to set the Remote IP address of the management laptop:

 

 

BTW: There is an own subforum here for questions about Pharos devices.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  1  
  1  
#2
Options
Re:Can't connect CPEs to Pharos Controller
2020-01-12 15:56:03

@R1D2 , Oh yeah. The CPE is AP Client Router mode.

What IP should i put under Web Server?

  0  
  0  
#3
Options
Re:Can't connect CPEs to Pharos Controller
2020-01-12 16:02:53

@Heujenthro, you need to set the IP of the system which you use to access the web UI. If you want to use more than one system for access, you need to use port forwarding on your router and insert the IP of the router. But be careful if the router is connected to the Internet. If this is the case, you should set up the firewall to limit access to the CPE.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  1  
  1  
#4
Options
Re:Can't connect CPEs to Pharos Controller
2020-01-12 16:10:06

@R1D2 , Only the Pharos controller/Server will access the CPE. So i should put the IP of the Pharos server?


 

 

Pharos server is 192.168.1.20
CPE210 is 192.168.1.10
 

  0  
  0  
#5
Options
Re:Can't connect CPEs to Pharos Controller
2020-01-12 16:18:22 - last edited 2020-01-12 16:22:50

@Heujenthro, no.

 

The Pharos controller just offers your browser a link, so it is the system where the browser is running which accesses the CPE.

Trust me, I have just tested this with my Pharos controller and a CPE set up exclusively for the test.

 

And BTW, regarding your other post: Omada controller and Pharos controller can't be integrated easily (different protocols, different designs).

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  1  
  1  
#6
Options
Re:Can't connect CPEs to Pharos Controller
2020-01-12 16:37:06

@R1D2 , Okay. Got it.

I think, to make it easy i should do the standard or the recomended WISP setup and more organized network. :)

Regarding on the Pharos and Omada Integration, that could be done if each device has a micro API to centralized management server.

  0  
  0  
#7
Options
Re:Can't connect CPEs to Pharos Controller
2020-01-12 17:13:17 - last edited 2020-01-12 17:14:37

 

Heujenthro wrote


Regarding on the Pharos and Omada Integration, that could be done if each device has a micro API to centralized management server.

 

Both product lines have completely different use patterns. Device settings are different, though. R&D teams are different, protocols used for remote mgmt are different. If Pharos settings can be compared with something, then it is Auranet CAPs and AC50/500. Their web UI looks pretty similar to the one used in Pharos products.

 

Could you get Pharos remote mgmt working meanwhile?

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#8
Options
Re:Can't connect CPEs to Pharos Controller
2020-01-12 17:24:31

@R1D2 , Well if that's the case then, i'll wait what comes for the future of TP-Link devices. :)

My point is, if i want to use all product of TP-Link for my WISP / WiFi infrastructure setup its hard for us to management each product line or product category.
But i believe that R&D team of tp-link can achieve this unified / centralized management of their devices to one server approach. I just hoping that this feature make possible and could bring us into a next level of tp-link infrastructure management.

  0  
  0  
#9
Options
Re:Can't connect CPEs to Pharos Controller
2020-01-12 18:24:02 - last edited 2020-01-12 18:24:32

Just for the record: I'm not speaking for TP-Link, I'm just a user as you are. But I saw no update for Pharos Control since years now.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#10
Options

Information

Helpful: 0

Views: 2027

Replies: 9

Related Articles
 Pharos tilting of CPEs
1106 0
How many CPEs can connect to CPE510 in WISP mode and in standalone mode no Pharos?
1130 0
 online pharos controller
325 0
 Can't Connect to Controller - Certificate Error?
532 0
 Pharos can't find my two CPE210
668 0
Pharos CPE710
556 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.